[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241220055239.2744024-9-quic_ziyuzhan@quicinc.com>
Date: Fri, 20 Dec 2024 13:52:39 +0800
From: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, dmitry.baryshkov@...aro.org,
neil.armstrong@...aro.org, abel.vesa@...aro.org,
manivannan.sadhasivam@...aro.org, lpieralisi@...nel.org, kw@...ux.com,
bhelgaas@...gle.com, andersson@...nel.org, konradybcio@...nel.org
Cc: linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-pci@...r.kernel.org, quic_qianyu@...cinc.com,
quic_krichai@...cinc.com, quic_vbadigan@...cinc.com,
Ziyue Zhang <quic_ziyuzhan@...cinc.com>
Subject: [PATCH v3 8/8] arm64: dts: qcom: qcs8300: enable pcie1 for qcs8300 platform
Add configurations in devicetree for PCIe1, board related gpios,
PMIC regulators, etc.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
---
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 40 +++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index fe3200914f79..d4b0488a2e23 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -213,6 +213,23 @@ &pcie0_phy {
status = "okay";
};
+&pcie1 {
+ perst-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l6a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -255,6 +272,29 @@ perst-pins {
bias-pull-down;
};
};
+
+ pcie1_default_state: pcie1-default-state {
+ wake-pins {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ clkreq-pins {
+ pins = "gpio22";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
};
&uart7 {
--
2.34.1
Powered by blists - more mailing lists