[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6eg5ahmcxfvwzoybqqcksqergoeu5ivsqshfjjmotwe6t4brge@aahohpjlfqic>
Date: Mon, 23 Dec 2024 13:17:07 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Liu Ying <victor.liu@....com>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org, p.zabel@...gutronix.de,
airlied@...il.com, simona@...ll.ch, maarten.lankhorst@...ux.intel.com,
mripard@...nel.org, tzimmermann@...e.de, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, tglx@...utronix.de, vkoul@...nel.org,
kishon@...nel.org, aisheng.dong@....com, agx@...xcpu.org,
u.kleine-koenig@...libre.com, francesco@...cini.it, frank.li@....com
Subject: Re: [PATCH v7 11/19] drm/imx: Add i.MX8qxp Display Controller
interrupt controller
On Mon, Dec 23, 2024 at 02:41:39PM +0800, Liu Ying wrote:
> i.MX8qxp Display Controller has a built-in interrupt controller to support
> Enable/Status/Preset/Clear interrupt bit. Add driver for it.
>
> Reviewed-by: Maxime Ripard <mripard@...nel.org>
> Signed-off-by: Liu Ying <victor.liu@....com>
> ---
> v7:
> * Fix regmap_config definition by removing name field, correcting read ranges
> and setting max_register field.
> * Collect Maxime's R-b tag.
>
> v6:
> * No change.
>
> v5:
> * Replace .remove_new with .remove in dc-ic.c. (Uwe)
>
> v4:
> * Use regmap to define register map for all registers. (Dmitry)
> * Use regmap APIs to access registers. (Dmitry)
> * Use devm_kzalloc() to drmm_kzalloc() to allocate dc_ic_data data strutures.
> * Set suppress_bind_attrs driver flag to true to avoid unnecessary sys
> interfaces to bind/unbind the driver.
> * Take DC interrupt controller driver as a standalone driver instead of a
> component driver.
> * Replace drmm_kcalloc() with devm_kcalloc() to allocate an array for
> struct dc_ic_entry.
> * Call platform_get_irq() from DC interrupt controller driver to make sure
> parent interrupt controller driver is probed first.
>
> v3:
> * No change.
>
> v2:
> * No change.
>
> drivers/gpu/drm/imx/dc/Kconfig | 1 +
> drivers/gpu/drm/imx/dc/Makefile | 2 +-
> drivers/gpu/drm/imx/dc/dc-drv.c | 1 +
> drivers/gpu/drm/imx/dc/dc-drv.h | 1 +
> drivers/gpu/drm/imx/dc/dc-ic.c | 282 ++++++++++++++++++++++++++++++++
> 5 files changed, 286 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/imx/dc/dc-ic.c
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
--
With best wishes
Dmitry
Powered by blists - more mailing lists