[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241224-winbond-6-11-rc1-quad-support-v2-5-ad218dbc406f@bootlin.com>
Date: Tue, 24 Dec 2024 18:05:50 +0100
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Mark Brown <broonie@...nel.org>, Sanjay R Mehta <sanju.mehta@....com>,
Serge Semin <fancer.lancer@...il.com>, Han Xu <han.xu@....com>,
Conor Dooley <conor.dooley@...rochip.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Haibo Chen <haibo.chen@....com>, Yogesh Gaur <yogeshgaur.83@...il.com>,
Heiko Stuebner <heiko@...ech.de>, Michal Simek <michal.simek@....com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>, Vignesh Raghavendra <vigneshr@...com>,
Jacky Huang <ychuang3@...oton.com>, Shan-Chun Hung <schung@...oton.com>,
Chin-Ting Kuo <chin-ting_kuo@...eedtech.com>,
Cédric Le Goater <clg@...d.org>,
Joel Stanley <joel@....id.au>, Andrew Jeffery <andrew@...econstruct.com.au>,
Avi Fishman <avifishman70@...il.com>, Tomer Maimon <tmaimon77@...il.com>,
Tali Perry <tali.perry1@...il.com>, Patrick Venture <venture@...gle.com>,
Nancy Yuen <yuenn@...gle.com>, Benjamin Fair <benjaminfair@...gle.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Raju Rangoju <Raju.Rangoju@....com>
Cc: Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Steam Lin <stlin2@...bond.com>, linux-spi@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev,
linux-riscv@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-mtd@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org,
openbmc@...ts.ozlabs.org, linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v2 05/27] spi: amlogic-spifc-a1: Support per spi-mem
operation frequency switches
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/spi/spi-amlogic-spifc-a1.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-amlogic-spifc-a1.c b/drivers/spi/spi-amlogic-spifc-a1.c
index fadf6667cd51c40a29749b378b82161a337edc62..18c9aa2cbc290d8ac179438ab42c27e1a722d422 100644
--- a/drivers/spi/spi-amlogic-spifc-a1.c
+++ b/drivers/spi/spi-amlogic-spifc-a1.c
@@ -259,7 +259,7 @@ static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
size_t data_size = op->data.nbytes;
int ret;
- ret = amlogic_spifc_a1_set_freq(spifc, mem->spi->max_speed_hz);
+ ret = amlogic_spifc_a1_set_freq(spifc, op->max_freq);
if (ret)
return ret;
@@ -320,6 +320,10 @@ static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
.adjust_op_size = amlogic_spifc_a1_adjust_op_size,
};
+static const struct spi_controller_mem_caps amlogic_spifc_a1_mem_caps = {
+ .per_op_freq = true,
+};
+
static int amlogic_spifc_a1_probe(struct platform_device *pdev)
{
struct spi_controller *ctrl;
@@ -356,6 +360,7 @@ static int amlogic_spifc_a1_probe(struct platform_device *pdev)
ctrl->bits_per_word_mask = SPI_BPW_MASK(8);
ctrl->auto_runtime_pm = true;
ctrl->mem_ops = &amlogic_spifc_a1_mem_ops;
+ ctrl->mem_caps = &amlogic_spifc_a1_mem_caps;
ctrl->min_speed_hz = SPIFC_A1_MIN_HZ;
ctrl->max_speed_hz = SPIFC_A1_MAX_HZ;
ctrl->mode_bits = (SPI_RX_DUAL | SPI_TX_DUAL |
--
2.47.0
Powered by blists - more mailing lists