Message-Id: <20241225181338.69672-7-l.rubusch@gmail.com>
Date: Wed, 25 Dec 2024 18:13:37 +0000
From: Lothar Rubusch <l.rubusch@...il.com>
To: lars@...afoo.de,
	Michael.Hennerich@...log.com,
	jic23@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org
Cc: devicetree@...r.kernel.org,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	eraretuya@...il.com,
	l.rubusch@...il.com
Subject: [PATCH v8 6/7] iio: accel: adxl345: add FIFO with watermark events

Add a basic setup for FIFO with configurable watermark. Add a handler
for watermark interrupt events and extend the channel for the
scan_index needed for the iio channel. The sensor is configurable to use
a FIFO_BYPASSED mode or a FIFO_STREAM mode. For the FIFO_STREAM mode now
a watermark can be configured, or disabled by setting 0. Further features
require a working FIFO setup.

Signed-off-by: Lothar Rubusch <l.rubusch@...il.com>
---
 drivers/iio/accel/adxl345.h      |  27 ++-
 drivers/iio/accel/adxl345_core.c | 305 ++++++++++++++++++++++++++++++-
 2 files changed, 321 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index 6f39f16d3..bf9e86cff 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -15,18 +15,32 @@
 #define ADXL345_REG_OFS_AXIS(index)	(ADXL345_REG_OFSX + (index))
 #define ADXL345_REG_BW_RATE		0x2C
 #define ADXL345_REG_POWER_CTL		0x2D
+#define ADXL345_REG_INT_ENABLE		0x2E
+#define ADXL345_REG_INT_MAP		0x2F
+#define ADXL345_REG_INT_SOURCE		0x30
+#define ADXL345_REG_INT_SOURCE_MSK	0xFF
 #define ADXL345_REG_DATA_FORMAT		0x31
-#define ADXL345_REG_DATAX0		0x32
-#define ADXL345_REG_DATAY0		0x34
-#define ADXL345_REG_DATAZ0		0x36
-#define ADXL345_REG_DATA_AXIS(index)	\
-	(ADXL345_REG_DATAX0 + (index) * sizeof(__le16))
+#define ADXL345_REG_XYZ_BASE		0x32
+#define ADXL345_REG_DATA_AXIS(index)				\
+	(ADXL345_REG_XYZ_BASE + (index) * sizeof(__le16))
 
+#define ADXL345_REG_FIFO_CTL		0x38
+#define ADXL345_REG_FIFO_STATUS	0x39
+#define ADXL345_REG_FIFO_STATUS_MSK	0x3F
+
+#define ADXL345_FIFO_CTL_SAMPLES(x)	FIELD_PREP(GENMASK(4, 0), x)
+/* 0: INT1, 1: INT2 */
+#define ADXL345_FIFO_CTL_TRIGGER(x)	FIELD_PREP(BIT(5), x)
+#define ADXL345_FIFO_CTL_MODE(x)	FIELD_PREP(GENMASK(7, 6), x)
+
+#define ADXL345_INT_DATA_READY		BIT(7)
+#define ADXL345_INT_WATERMARK		BIT(1)
+#define ADXL345_INT_OVERRUN		BIT(0)
 #define ADXL345_BW_RATE			GENMASK(3, 0)
 #define ADXL345_BASE_RATE_NANO_HZ	97656250LL
 
-#define ADXL345_POWER_CTL_MEASURE	BIT(3)
 #define ADXL345_POWER_CTL_STANDBY	0x00
+#define ADXL345_POWER_CTL_MEASURE	BIT(3)
 
 #define ADXL345_DATA_FORMAT_RANGE	GENMASK(1, 0)	/* Set the g range */
 #define ADXL345_DATA_FORMAT_JUSTIFY	BIT(2)	/* Left-justified (MSB) mode */
@@ -40,6 +54,7 @@
 #define ADXL345_DATA_FORMAT_16G		3
 
 #define ADXL345_DEVID			0xE5
+#define ADXL345_FIFO_SIZE		32
 
 /*
  * In full-resolution mode, scale factor is maintained at ~4 mg/LSB
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 987a0fe03..738960298 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -15,9 +15,17 @@
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
 
 #include "adxl345.h"
 
+#define ADXL345_FIFO_BYPASS	0
+#define ADXL345_FIFO_FIFO	1
+#define ADXL345_FIFO_STREAM	2
+
+#define ADXL345_DIRS 3
+
 #define ADXL345_INT_NONE		0xff
 #define ADXL345_INT1			0
 #define ADXL345_INT2			1
@@ -28,25 +36,66 @@ struct adxl345_state {
 	bool fifo_delay; /* delay: delay is needed for SPI */
 	int irq;
 	u8 intio;
+	u8 int_map;
+	u8 watermark;
+	u8 fifo_mode;
+	__le16 fifo_buf[ADXL345_DIRS * ADXL345_FIFO_SIZE + 1] __aligned(IIO_DMA_MINALIGN);
 };
 
-#define ADXL345_CHANNEL(index, axis) {					\
+#define ADXL345_CHANNEL(index, reg, axis) {					\
 	.type = IIO_ACCEL,						\
 	.modified = 1,							\
 	.channel2 = IIO_MOD_##axis,					\
-	.address = index,						\
+	.address = (reg),						\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
 		BIT(IIO_CHAN_INFO_CALIBBIAS),				\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
 		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.scan_index = (index),				\
+	.scan_type = {					\
+		.sign = 's',				\
+		.realbits = 13,				\
+		.storagebits = 16,			\
+		.endianness = IIO_LE,			\
+	},						\
 }
 
+enum adxl345_chans {
+	chan_x, chan_y, chan_z,
+};
+
 static const struct iio_chan_spec adxl345_channels[] = {
-	ADXL345_CHANNEL(0, X),
-	ADXL345_CHANNEL(1, Y),
-	ADXL345_CHANNEL(2, Z),
+	ADXL345_CHANNEL(0, chan_x, X),
+	ADXL345_CHANNEL(1, chan_y, Y),
+	ADXL345_CHANNEL(2, chan_z, Z),
 };
 
+static const unsigned long adxl345_scan_masks[] = {
+	BIT(chan_x) | BIT(chan_y) | BIT(chan_z),
+	0
+};
+
+static int adxl345_set_interrupts(struct adxl345_state *st)
+{
+	int ret;
+	unsigned int int_enable = st->int_map;
+	unsigned int int_map;
+
+	/*
+	 * Any bits set to 0 in the INT map register send their respective
+	 * interrupts to the INT1 pin, whereas bits set to 1 send their respective
+	 * interrupts to the INT2 pin. The intio shall convert this accordingly.
+	 */
+	int_map = FIELD_GET(ADXL345_REG_INT_SOURCE_MSK,
+			    st->intio ? st->int_map : ~st->int_map);
+
+	ret = regmap_write(st->regmap, ADXL345_REG_INT_MAP, int_map);
+	if (ret)
+		return ret;
+
+	return regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, int_enable);
+}
+
 static int adxl345_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val, int *val2, long mask)
@@ -132,6 +181,24 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+static int adxl345_set_watermark(struct iio_dev *indio_dev, unsigned int value)
+{
+	struct adxl345_state *st = iio_priv(indio_dev);
+	unsigned int fifo_mask = 0x1F;
+	int ret;
+
+	value = min(value, ADXL345_FIFO_SIZE - 1);
+
+	ret = regmap_update_bits(st->regmap, ADXL345_REG_FIFO_CTL, fifo_mask, value);
+	if (ret)
+		return ret;
+
+	st->watermark = value;
+	st->int_map |= ADXL345_INT_WATERMARK;
+
+	return 0;
+}
+
 static int adxl345_write_raw_get_fmt(struct iio_dev *indio_dev,
 				     struct iio_chan_spec const *chan,
 				     long mask)
@@ -186,11 +253,217 @@ static const struct attribute_group adxl345_attrs_group = {
 	.attrs = adxl345_attrs,
 };
 
+static int adxl345_set_fifo(struct adxl345_state *st)
+{
+	int ret;
+
+	/* FIFO should only be configured while in standby mode */
+	ret = adxl345_set_measure_en(st, false);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(st->regmap, ADXL345_REG_FIFO_CTL,
+			   ADXL345_FIFO_CTL_SAMPLES(st->watermark) |
+			   ADXL345_FIFO_CTL_TRIGGER(st->intio) |
+			   ADXL345_FIFO_CTL_MODE(st->fifo_mode));
+	if (ret < 0)
+		return ret;
+
+	return adxl345_set_measure_en(st, true);
+}
+
+/**
+ * adxl345_get_samples() - Read number of FIFO entries.
+ * @st: The initialized state instance of this driver.
+ *
+ * The sensor does not support treating any axis individually, or exclude them
+ * from measuring.
+ *
+ * Return: negative error, or value.
+ */
+static int adxl345_get_samples(struct adxl345_state *st)
+{
+	unsigned int regval = 0;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADXL345_REG_FIFO_STATUS, &regval);
+	if (ret < 0)
+		return ret;
+
+	return FIELD_GET(ADXL345_REG_FIFO_STATUS_MSK, regval);
+}
+
+/**
+ * adxl345_fifo_transfer() - Read samples number of elements.
+ * @st: The instance of the state object of this sensor.
+ * @samples: The number of lines in the FIFO referred to as fifo_entry.
+ *
+ * It is recommended that a multiple-byte read of all registers be performed to
+ * prevent a change in data between reads of sequential registers. That is to
+ * read out the data registers X0, X1, Y0, Y1, Z0, Z1, i.e. 6 bytes at once.
+ *
+ * Return: 0 or error value.
+ */
+static int adxl345_fifo_transfer(struct adxl345_state *st, int samples)
+{
+	size_t count;
+	int i, ret = 0;
+
+	/* count is the 3x the fifo_buf element size, hence 6B */
+	count = sizeof(st->fifo_buf[0]) * ADXL345_DIRS;
+	for (i = 0; i < samples; i++) {
+		/* read 3x 2 byte elements from base address into next fifo_buf position */
+		ret = regmap_bulk_read(st->regmap, ADXL345_REG_XYZ_BASE,
+				       st->fifo_buf + (i * count / 2), count);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * To ensure that the FIFO has completely popped, there must be at least 5
+		 * us between the end of reading the data registers, signified by the
+		 * transition to register 0x38 from 0x37 or the CS pin going high, and the
+		 * start of new reads of the FIFO or reading the FIFO_STATUS register. For
+		 * SPI operation at 1.5 MHz or lower, the register addressing portion of the
+		 * transmission is sufficient delay to ensure the FIFO has completely
+		 * popped. It is necessary for SPI operation greater than 1.5 MHz to
+		 * de-assert the CS pin to ensure a total of 5 us, which is at most 3.4 us
+		 * at 5 MHz operation.
+		 */
+		if (st->fifo_delay && samples > 1)
+			udelay(3);
+	}
+	return ret;
+}
+
+/**
+ * adxl345_fifo_reset() - Empty the FIFO in error condition.
+ * @st: The instance to the state object of the sensor.
+ *
+ * Read all elements of the FIFO. Reading the interrupt source register
+ * resets the sensor.
+ */
+static void adxl345_fifo_reset(struct adxl345_state *st)
+{
+	int regval;
+	int samples;
+
+	adxl345_set_measure_en(st, false);
+
+	samples = adxl345_get_samples(st);
+	if (samples > 0)
+		adxl345_fifo_transfer(st, samples);
+
+	regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &regval);
+
+	adxl345_set_measure_en(st, true);
+}
+
+static int adxl345_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct adxl345_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = adxl345_set_interrupts(st);
+	if (ret < 0)
+		return ret;
+
+	st->fifo_mode = ADXL345_FIFO_STREAM;
+	return adxl345_set_fifo(st);
+}
+
+static int adxl345_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct adxl345_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->fifo_mode = ADXL345_FIFO_BYPASS;
+	ret = adxl345_set_fifo(st);
+	if (ret < 0)
+		return ret;
+
+	st->int_map = 0x00;
+	return adxl345_set_interrupts(st);
+}
+
+static const struct iio_buffer_setup_ops adxl345_buffer_ops = {
+	.postenable = adxl345_buffer_postenable,
+	.predisable = adxl345_buffer_predisable,
+};
+
+static int adxl345_get_status(struct adxl345_state *st)
+{
+	int ret;
+	unsigned int regval;
+
+	ret = regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &regval);
+	if (ret < 0)
+		return ret;
+
+	return FIELD_GET(ADXL345_REG_INT_SOURCE_MSK, regval);
+}
+
+static int adxl345_fifo_push(struct iio_dev *indio_dev,
+			     int samples)
+{
+	struct adxl345_state *st = iio_priv(indio_dev);
+	int i, ret;
+
+	if (samples <= 0)
+		return -EINVAL;
+
+	ret = adxl345_fifo_transfer(st, samples);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ADXL345_DIRS * samples; i += ADXL345_DIRS)
+		iio_push_to_buffers(indio_dev, &st->fifo_buf[i]);
+
+	return 0;
+}
+
+/**
+ * adxl345_irq_handler() - Handle irqs of the ADXL345.
+ * @irq: The irq being handled.
+ * @p: The struct iio_device pointer for the device.
+ *
+ * Return: The interrupt was handled.
+ */
+static irqreturn_t adxl345_irq_handler(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct adxl345_state *st = iio_priv(indio_dev);
+	int int_stat;
+	int samples;
+
+	int_stat = adxl345_get_status(st);
+	if (int_stat <= 0)
+		return IRQ_NONE;
+
+	if (int_stat & ADXL345_INT_OVERRUN)
+		goto err;
+
+	if (int_stat & ADXL345_INT_WATERMARK) {
+		samples = adxl345_get_samples(st);
+		if (samples < 0)
+			goto err;
+
+		if (adxl345_fifo_push(indio_dev, samples) < 0)
+			goto err;
+	}
+	return IRQ_HANDLED;
+
+err:
+	adxl345_fifo_reset(st);
+
+	return IRQ_HANDLED;
+}
+
 static const struct iio_info adxl345_info = {
 	.attrs		= &adxl345_attrs_group,
 	.read_raw	= adxl345_read_raw,
 	.write_raw	= adxl345_write_raw,
 	.write_raw_get_fmt	= adxl345_write_raw_get_fmt,
+	.hwfifo_set_watermark = adxl345_set_watermark,
 };
 
 /**
@@ -221,6 +494,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 					 ADXL345_DATA_FORMAT_JUSTIFY |
 					 ADXL345_DATA_FORMAT_FULL_RES |
 					 ADXL345_DATA_FORMAT_SELF_TEST);
+	u8 fifo_ctl;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
@@ -239,6 +513,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = adxl345_channels;
 	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
+	indio_dev->available_scan_masks = adxl345_scan_masks;
 
 	if (setup) {
 		/* Perform optional initial bus specific configuration */
@@ -289,6 +564,26 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 			st->intio = ADXL345_INT_NONE;
 	}
 
+	if (st->intio != ADXL345_INT_NONE) {
+		/* FIFO_STREAM mode is going to be activated later */
+		ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, &adxl345_buffer_ops);
+		if (ret)
+			return ret;
+
+		ret = devm_request_threaded_irq(dev, st->irq, NULL,
+						&adxl345_irq_handler,
+						IRQF_SHARED | IRQF_ONESHOT,
+						indio_dev->name, indio_dev);
+		if (ret)
+			return ret;
+	} else {
+		/* FIFO_BYPASS mode */
+		fifo_ctl = ADXL345_FIFO_CTL_MODE(ADXL345_FIFO_BYPASS);
+		ret = regmap_write(st->regmap, ADXL345_REG_FIFO_CTL, fifo_ctl);
+		if (ret < 0)
+			return ret;
+	}
+
 	return devm_iio_device_register(dev, indio_dev);
 }
 EXPORT_SYMBOL_NS_GPL(adxl345_core_probe, IIO_ADXL345);
-- 
2.39.5

Powered by blists - more mailing lists