| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241226-imx219_fixes-v4-3-dd28383f06f7@ideasonboard.com>
Date: Thu, 26 Dec 2024 13:19:35 +0530
From: Jai Luthra <jai.luthra@...asonboard.com>
To: Dave Stevenson <dave.stevenson@...pberrypi.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jai Luthra <jai.luthra@...asonboard.com>
Subject: [PATCH v4 3/5] media: i2c: imx219: make HBLANK r/w to allow longer
exposures
From: Dave Stevenson <dave.stevenson@...pberrypi.com>
The HBLANK control was read-only, and always configured such that the
sensor line length register was 3448. This limited the maximum exposure
time that could be achieved to around 1.26 secs.
Make HBLANK read/write so that the line time can be extended, and
thereby allow longer exposures (and slower frame rates). Retain the
overall line length setting when changing modes rather than resetting it
to a default.
Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@...asonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@...asonboard.com>
---
drivers/media/i2c/imx219.c | 49 +++++++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 20 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 6c4a72d88cdd2bdd05f2273786110c9f2818e44f..84681e5da3e238905139fe174e9ee3cfe5fa0246 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -73,11 +73,10 @@
#define IMX219_REG_FRM_LENGTH CCI_REG16(0x0160)
#define IMX219_FLL_MAX 0xffff
#define IMX219_VBLANK_MIN 32
+#define IMX219_REG_LINE_LENGTH CCI_REG16(0x0162)
+#define IMX219_LLP_MIN 0x0d78
+#define IMX219_LLP_MAX 0x7ff0
-/* HBLANK control - read only */
-#define IMX219_PPL_DEFAULT 3448
-
-#define IMX219_REG_LINE_LENGTH_A CCI_REG16(0x0162)
#define IMX219_REG_X_ADD_STA_A CCI_REG16(0x0164)
#define IMX219_REG_X_ADD_END_A CCI_REG16(0x0166)
#define IMX219_REG_Y_ADD_STA_A CCI_REG16(0x0168)
@@ -191,7 +190,7 @@ static const struct cci_reg_sequence imx219_common_regs[] = {
{ CCI_REG8(0x479b), 0x0e },
/* Frame Bank Register Group "A" */
- { IMX219_REG_LINE_LENGTH_A, 3448 },
+ { IMX219_REG_LINE_LENGTH, IMX219_LLP_MIN },
{ IMX219_REG_X_ODD_INC_A, 1 },
{ IMX219_REG_Y_ODD_INC_A, 1 },
@@ -420,6 +419,10 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
cci_write(imx219->regmap, IMX219_REG_FRM_LENGTH,
format->height + ctrl->val, &ret);
break;
+ case V4L2_CID_HBLANK:
+ cci_write(imx219->regmap, IMX219_REG_LINE_LENGTH,
+ format->width + ctrl->val, &ret);
+ break;
case V4L2_CID_TEST_PATTERN_RED:
cci_write(imx219->regmap, IMX219_REG_TESTP_RED,
ctrl->val, &ret);
@@ -465,7 +468,7 @@ static int imx219_init_controls(struct imx219 *imx219)
const struct imx219_mode *mode = &supported_modes[0];
struct v4l2_ctrl_handler *ctrl_hdlr;
struct v4l2_fwnode_device_properties props;
- int exposure_max, exposure_def, hblank;
+ int exposure_max, exposure_def;
int i, ret;
ctrl_hdlr = &imx219->ctrl_handler;
@@ -489,17 +492,16 @@ static int imx219_init_controls(struct imx219 *imx219)
if (imx219->link_freq)
imx219->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- /* Initial vblank/hblank/exposure parameters based on current mode */
+ /* Initial blanking and exposure. Limits are updated during set_fmt */
imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
IMX219_FLL_MAX - mode->height, 1,
mode->vts_def - mode->height);
- hblank = IMX219_PPL_DEFAULT - mode->width;
imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
- V4L2_CID_HBLANK, hblank, hblank,
- 1, hblank);
- if (imx219->hblank)
- imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ V4L2_CID_HBLANK,
+ IMX219_LLP_MIN - mode->width,
+ IMX219_LLP_MAX - mode->width, 1,
+ IMX219_LLP_MIN - mode->width);
exposure_max = mode->vts_def - 4;
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
exposure_max : IMX219_EXPOSURE_DEFAULT;
@@ -815,6 +817,10 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
unsigned int bin_h, bin_v;
+ u32 prev_line_len;
+
+ format = v4l2_subdev_state_get_format(state, 0);
+ prev_line_len = format->width + imx219->hblank->val;
mode = v4l2_find_nearest_size(supported_modes,
ARRAY_SIZE(supported_modes),
@@ -822,8 +828,6 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
fmt->format.width, fmt->format.height);
imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
-
- format = v4l2_subdev_state_get_format(state, 0);
*format = fmt->format;
/*
@@ -859,13 +863,18 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
exposure_max, imx219->exposure->step,
exposure_def);
/*
- * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
- * depends on mode->width only, and is not changeble in any
- * way other than changing the mode.
+ * Retain PPL setting from previous mode so that the
+ * line time does not change on a mode change.
+ * Limits have to be recomputed as the controls define
+ * the blanking only, so PPL values need to have the
+ * mode width subtracted.
*/
- hblank = IMX219_PPL_DEFAULT - mode->width;
- __v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
- hblank);
+ hblank = prev_line_len - mode->width;
+ __v4l2_ctrl_modify_range(imx219->hblank,
+ IMX219_LLP_MIN - mode->width,
+ IMX219_LLP_MAX - mode->width, 1,
+ IMX219_LLP_MIN - mode->width);
+ __v4l2_ctrl_s_ctrl(imx219->hblank, hblank);
}
return 0;
--
2.47.1
Powered by blists - more mailing lists