lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241226031845.2574669-1-quic_yuanjiey@quicinc.com>
Date: Thu, 26 Dec 2024 11:18:45 +0800
From: Yuanjie Yang <quic_yuanjiey@...cinc.com>
To: adrian.hunter@...el.com, ulf.hansson@...aro.org,
        linux-arm-msm@...r.kernel.org, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, dmitry.baryshkov@...aro.org,
        andersson@...nel.org
Cc: quic_tingweiz@...cinc.com, quic_zhgao@...cinc.com,
        quic_yuanjiey@...cinc.com
Subject: [PATCH v3] mmc: sdhci-msm: Correctly set the load for the regulator

Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.

Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@...cinc.com>
---
Changes in v3:
- Optimize the code logic and separate code for regulator vmmc and vqmmc
- Rebase on tag: next-20241217
- Link to v2: https://lore.kernel.org/all/20241127095029.3918290-1-quic_yuanjiey@quicinc.com/

Changes in v2:
- Add enum msm_reg_type to optimize the code
- Delete redundant emmc type judgment
- Link to v1: https://lore.kernel.org/linux-arm-msm/20241122075048.2006894-1-quic_yuanjiey@quicinc.com/

---
 drivers/mmc/host/sdhci-msm.c | 64 ++++++++++++++++++++++++++++++++++--
 1 file changed, 62 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e00208535bd1..22811964ba61 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -134,9 +134,18 @@
 /* Timeout value to avoid infinite waiting for pwr_irq */
 #define MSM_PWR_IRQ_TIMEOUT_MS 5000
 
+/* Max load for eMMC Vdd supply */
+#define MMC_VMMC_MAX_LOAD_UA	570000
+
 /* Max load for eMMC Vdd-io supply */
 #define MMC_VQMMC_MAX_LOAD_UA	325000
 
+/* Max load for SD Vdd supply */
+#define SD_VMMC_MAX_LOAD_UA	800000
+
+/* Max load for SD Vdd-io supply */
+#define SD_VQMMC_MAX_LOAD_UA	22000
+
 #define msm_host_readl(msm_host, host, offset) \
 	msm_host->var_ops->msm_readl_relaxed(host, offset)
 
@@ -1403,11 +1412,59 @@ static int sdhci_msm_set_pincfg(struct sdhci_msm_host *msm_host, bool level)
 	return ret;
 }
 
-static int sdhci_msm_set_vmmc(struct mmc_host *mmc)
+static void msm_config_vmmc_regulator(struct mmc_host *mmc, bool hpm)
+{
+	int load;
+
+	if (!mmc->card) {
+		regulator_set_mode(mmc->supply.vmmc,
+				   hpm ? REGULATOR_MODE_NORMAL : REGULATOR_MODE_IDLE);
+		return;
+	}
+
+	if (!mmc_card_mmc(mmc->card) &&
+	    !mmc_card_sd(mmc->card))
+		return;
+
+	if (mmc_card_mmc(mmc->card))
+		load = MMC_VMMC_MAX_LOAD_UA;
+	else if (mmc_card_sd(mmc->card))
+		load =  SD_VMMC_MAX_LOAD_UA;
+	load = hpm ? load : 0;
+
+	regulator_set_load(mmc->supply.vmmc, load);
+
+	return;
+}
+
+static void msm_config_vqmmc_regulator(struct mmc_host *mmc, bool hpm)
+{
+	int load;
+
+	if (!mmc->card) {
+		regulator_set_mode(mmc->supply.vqmmc,
+				   hpm ? REGULATOR_MODE_NORMAL : REGULATOR_MODE_IDLE);
+		return;
+	}
+
+	if (!mmc_card_sd(mmc->card))
+		return;
+
+	load =  hpm ? SD_VQMMC_MAX_LOAD_UA : 0;
+
+	regulator_set_load(mmc->supply.vqmmc, load);
+
+	return;
+}
+
+static int sdhci_msm_set_vmmc(struct sdhci_msm_host *msm_host,
+			      struct mmc_host *mmc, bool hpm)
 {
 	if (IS_ERR(mmc->supply.vmmc))
 		return 0;
 
+	msm_config_vmmc_regulator(mmc, hpm);
+
 	return mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, mmc->ios.vdd);
 }
 
@@ -1420,6 +1477,8 @@ static int msm_toggle_vqmmc(struct sdhci_msm_host *msm_host,
 	if (msm_host->vqmmc_enabled == level)
 		return 0;
 
+	msm_config_vqmmc_regulator(mmc, level);
+
 	if (level) {
 		/* Set the IO voltage regulator to default voltage level */
 		if (msm_host->caps_0 & CORE_3_0V_SUPPORT)
@@ -1642,7 +1701,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
 	}
 
 	if (pwr_state) {
-		ret = sdhci_msm_set_vmmc(mmc);
+		ret = sdhci_msm_set_vmmc(msm_host, mmc,
+					 pwr_state & REQ_BUS_ON);
 		if (!ret)
 			ret = sdhci_msm_set_vqmmc(msm_host, mmc,
 					pwr_state & REQ_BUS_ON);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ