| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241227-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v2-6-06fdd5a7d5bb@linaro.org>
Date: Fri, 27 Dec 2024 13:11:39 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Loic Poulain <loic.poulain@...aro.org>, Robert Foss <rfoss@...nel.org>,
Andi Shyti <andi.shyti@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Todor Tomov <todor.too@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Jagadeesh Kona <quic_jkona@...cinc.com>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, linux-clk@...r.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Subject: [PATCH v2 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block
definition
Add dtsi to describe the xe180100 CAMSS block
4 x CSIPHY
2 x CSID
2 x CSID Lite
2 x IFE
2 x IFE Lite
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 185 +++++++++++++++++++++++++++++++++
1 file changed, 185 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index cc174a021e4c7b3f6578f44691eb70592975f8e8..decb895da44145e7480c782c7814ca064e7c9aa0 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4726,6 +4726,191 @@ cci1_i2c1: i2c-bus@1 {
};
};
+ camss: isp@...6000 {
+ compatible = "qcom,x1e80100-camss";
+
+ reg = <0 0x0acb6000 0 0x1000>,
+ <0 0x0acb7000 0 0x2000>,
+ <0 0x0acb9000 0 0x2000>,
+ <0 0x0acbb000 0 0x2000>,
+ <0 0x0acc6000 0 0x1000>,
+ <0 0x0acca000 0 0x1000>,
+ <0 0x0ace4000 0 0x2000>,
+ <0 0x0ace6000 0 0x2000>,
+ <0 0x0ace8000 0 0x2000>,
+ <0 0x0acec000 0 0x2000>,
+ <0 0x0acf6000 0 0x1000>,
+ <0 0x0acf7000 0 0x1000>,
+ <0 0x0acf8000 0 0x1000>,
+ <0 0x0acc7000 0 0x2000>,
+ <0 0x0accb000 0 0x2000>,
+ <0 0x0ac62000 0 0x4000>,
+ <0 0x0ac71000 0 0x4000>;
+ reg-names = "csid_wrapper",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy4",
+ "csitpg0",
+ "csitpg1",
+ "csitpg2",
+ "vfe_lite0",
+ "vfe_lite1",
+ "vfe0",
+ "vfe1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_rt_axi",
+ "camnoc_nrt_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "cpas_fast_ahb",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "cpas_vfe_lite",
+ "cphy_rx_clk_src",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x800 0x60>,
+ <&apps_smmu 0x860 0x60>,
+ <&apps_smmu 0x1800 0x60>,
+ <&apps_smmu 0x1860 0x60>,
+ <&apps_smmu 0x18e0 0x00>,
+ <&apps_smmu 0x1900 0x00>,
+ <&apps_smmu 0x1980 0x20>,
+ <&apps_smmu 0x19a0 0x20>;
+
+ power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+ <&camcc CAM_CC_IFE_1_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
camcc: clock-controller@...0000 {
compatible = "qcom,x1e80100-camcc";
reg = <0 0x0ade0000 0 0x20000>;
--
2.45.2
Powered by blists - more mailing lists