linux-kernel - Re: [PATCH v8 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241228143038.29c7a9a5@jic23-huawei>
Date: Sat, 28 Dec 2024 14:30:38 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Lothar Rubusch <l.rubusch@...il.com>, lars@...afoo.de,
 Michael.Hennerich@...log.com, robh@...nel.org, krzk+dt@...nel.org,
 conor+dt@...nel.org, devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
 linux-kernel@...r.kernel.org, eraretuya@...il.com
Subject: Re: [PATCH v8 3/7] dt-bindings: iio: accel: adxl345: add
 interrupt-names

On Fri, 27 Dec 2024 08:58:00 +0100
Krzysztof Kozlowski <krzk@...nel.org> wrote:

> On Wed, Dec 25, 2024 at 06:13:34PM +0000, Lothar Rubusch wrote:
> > Add interrupt-names INT1 and INT2 for the two interrupt lines of the
> > sensor.
> > 
> > When one of the two interrupt lines is connected, the interrupt as its
> > interrupt-name, need to be declared in the devicetree. The driver then
> > configures the sensor to indicate its events on either INT1 or INT2.
> > 
> > If no interrupt is configured, then no interrupt-name should be
> > configured, and vice versa. In this case the sensor runs in FIFO BYPASS
> > mode. This allows sensor measurements, but none of the sensor events.
> > 
> > Signed-off-by: Lothar Rubusch <l.rubusch@...il.com>  
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> 
> Best regards,
> Krzysztof
> 
Applied. thanks

Jonathan