[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250102103814.102499-1-u-kumar1@ti.com>
Date: Thu, 2 Jan 2025 16:08:14 +0530
From: Udit Kumar <u-kumar1@...com>
To: <nm@...com>, <vigneshr@...com>
CC: <kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Udit Kumar
<u-kumar1@...com>
Subject: [PATCH] arm64: dts: ti: k3-j722s-evm: Enable PMIC
Add support for TPS6522x PMIC family on wakeup I2C0 bus.
This device provides regulators (bucks and LDOs), along with
GPIOs, and monitors SOC's MCU error signal.
Signed-off-by: Udit Kumar <u-kumar1@...com>
---
Bootlogs
https://gist.github.com/uditkumarti/961cdece09f176e1e1806efef7799cf2
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 88 +++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index a00f4a7d20d9..691c6560ec04 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -359,6 +359,13 @@ audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
>;
};
+
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x030, PIN_INPUT, 7) /* (K23) GPIO0_12 */
+ >;
+ };
+
};
&cpsw3g {
@@ -459,6 +466,87 @@ &wkup_i2c0 {
clock-frequency = <400000>;
status = "okay";
bootph-all;
+
+ tps65224: pmic@48 {
+ compatible = "ti,tps65224-q1";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ ti,primary-pmic;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck12-supply = <&vsys_io_3v3>;
+ buck3-supply = <&vsys_io_3v3>;
+ buck4-supply = <&vsys_io_3v3>;
+
+ ldo1-supply = <&vsys_io_3v3>;
+ ldo2-supply = <&vsys_io_3v3>;
+ ldo3-supply = <&vsys_io_3v3>;
+
+ regulators {
+
+ buck1: buck1 {
+ regulator-name = "vcc1v8_io_buck1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ bootph-all;
+ };
+
+ buck2: buck2 {
+ regulator-name = "vcc1v1_ddr_buck2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck3: buck3 {
+ regulator-name = "vcc0v85_ram_buck3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4: buck4 {
+ regulator-name = "vcc0v75_ioret_buck4";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: ldo1 {
+ regulator-name = "vdda1v8_pll_ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: ldo2 {
+ regulator-name = "dvdd3v3_ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: ldo3 {
+ regulator-name = "vdd1v85_phy_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&k3_clks {
--
2.34.1
Powered by blists - more mailing lists