| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250103101231.1508151-11-b-padhi@ti.com>
Date: Fri, 3 Jan 2025 15:42:21 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <andersson@...nel.org>, <mathieu.poirier@...aro.org>
CC: <afd@...com>, <hnagalla@...com>, <u-kumar1@...com>,
<p.zabel@...gutronix.de>, <jan.kiszka@...mens.com>,
<christophe.jaillet@...adoo.fr>, <jkangas@...hat.com>,
<eballetbo@...hat.com>, <b-padhi@...com>,
<linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v8 10/20] remoteproc: k3: Refactor .unprepare rproc ops into common driver
The .unprepare rproc ops implementations in ti_k3_dsp_remoteproc.c and
ti_k3_m4_remoteproc.c drivers assert the global reset on the remote
processor. Refactor the implementations into ti_k3_common.c driver as
k3_rproc_unprepare() and align DSP and M4 drivers to register this
common function as .unprepare ops.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
drivers/remoteproc/ti_k3_common.c | 30 ++++++++++++++++++++++
drivers/remoteproc/ti_k3_common.h | 1 +
drivers/remoteproc/ti_k3_dsp_remoteproc.c | 26 +------------------
drivers/remoteproc/ti_k3_m4_remoteproc.c | 31 +----------------------
4 files changed, 33 insertions(+), 55 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_common.c b/drivers/remoteproc/ti_k3_common.c
index 699528e4a369..7fd8c8394d95 100644
--- a/drivers/remoteproc/ti_k3_common.c
+++ b/drivers/remoteproc/ti_k3_common.c
@@ -251,5 +251,35 @@ int k3_rproc_prepare(struct rproc *rproc)
}
EXPORT_SYMBOL_GPL(k3_rproc_prepare);
+/*
+ * This function implements the .unprepare() ops and performs the complimentary
+ * operations to that of the .prepare() ops. The function is used to assert the
+ * global reset on applicable K3 DSP and M4 cores. This completes the second
+ * portion of powering down the remote core. The cores themselves are only
+ * halted in the .stop() callback through the local reset, and the .unprepare()
+ * ops is invoked by the remoteproc core after the remoteproc is stopped to
+ * balance the global reset.
+ */
+int k3_rproc_unprepare(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+ struct device *dev = kproc->dev;
+ int ret;
+
+ /* If the core is going to be detached do not assert the module reset */
+ if (rproc->state == RPROC_ATTACHED)
+ return 0;
+
+ ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
+ kproc->ti_sci_id);
+ if (ret) {
+ dev_err(dev, "module-reset assert failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(k3_rproc_unprepare);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TI K3 common Remoteproc code");
diff --git a/drivers/remoteproc/ti_k3_common.h b/drivers/remoteproc/ti_k3_common.h
index 22dd6e13f47a..b6b977e16af6 100644
--- a/drivers/remoteproc/ti_k3_common.h
+++ b/drivers/remoteproc/ti_k3_common.h
@@ -94,4 +94,5 @@ int k3_rproc_reset(struct k3_rproc *kproc);
int k3_rproc_release(struct k3_rproc *kproc);
int k3_rproc_request_mbox(struct rproc *rproc);
int k3_rproc_prepare(struct rproc *rproc);
+int k3_rproc_unprepare(struct rproc *rproc);
#endif /* REMOTEPROC_TI_K3_COMMON_H */
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 078bfb9aa233..7e7aca192d0a 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -24,29 +24,6 @@
#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1)
-/*
- * This function implements the .unprepare() ops and performs the complimentary
- * operations to that of the .prepare() ops. The function is used to assert the
- * global reset on applicable C66x cores. This completes the second portion of
- * powering down the C66x DSP cores. The cores themselves are only halted in the
- * .stop() callback through the local reset, and the .unprepare() ops is invoked
- * by the remoteproc core after the remoteproc is stopped to balance the global
- * reset. This callback is invoked only in remoteproc mode.
- */
-static int k3_dsp_rproc_unprepare(struct rproc *rproc)
-{
- struct k3_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
- int ret;
-
- ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
- kproc->ti_sci_id);
- if (ret)
- dev_err(dev, "module-reset assert failed (%pe)\n", ERR_PTR(ret));
-
- return ret;
-}
-
/*
* Power up the DSP remote processor.
*
@@ -394,7 +371,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
rproc->recovery_disabled = true;
if (data->uses_lreset) {
rproc->ops->prepare = k3_rproc_prepare;
- rproc->ops->unprepare = k3_dsp_rproc_unprepare;
+ rproc->ops->unprepare = k3_rproc_unprepare;
}
kproc = rproc->priv;
kproc->rproc = rproc;
@@ -451,7 +428,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
dev_info(dev, "configured DSP for IPC-only mode\n");
rproc->state = RPROC_DETACHED;
/* override rproc ops with only required IPC-only mode ops */
- rproc->ops->unprepare = NULL;
rproc->ops->start = NULL;
rproc->ops->stop = NULL;
rproc->ops->attach = k3_dsp_rproc_attach;
diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index 218d4bf941a1..25f013fa7511 100644
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -21,35 +21,6 @@
#include "ti_sci_proc.h"
#include "ti_k3_common.h"
-/*
- * This function implements the .unprepare() ops and performs the complimentary
- * operations to that of the .prepare() ops. The function is used to assert the
- * global reset on applicable cores. This completes the second portion of
- * powering down the remote core. The cores themselves are only halted in the
- * .stop() callback through the local reset, and the .unprepare() ops is invoked
- * by the remoteproc core after the remoteproc is stopped to balance the global
- * reset.
- */
-static int k3_m4_rproc_unprepare(struct rproc *rproc)
-{
- struct k3_rproc *kproc = rproc->priv;
- struct device *dev = kproc->dev;
- int ret;
-
- /* If the core is going to be detached do not assert the module reset */
- if (rproc->state == RPROC_ATTACHED)
- return 0;
-
- ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
- kproc->ti_sci_id);
- if (ret) {
- dev_err(dev, "module-reset assert failed\n");
- return ret;
- }
-
- return 0;
-}
-
/*
* This function implements the .get_loaded_rsc_table() callback and is used
* to provide the resource table for a booted remote processor in IPC-only
@@ -344,7 +315,7 @@ static int k3_m4_rproc_detach(struct rproc *rproc)
static const struct rproc_ops k3_m4_rproc_ops = {
.prepare = k3_rproc_prepare,
- .unprepare = k3_m4_rproc_unprepare,
+ .unprepare = k3_rproc_unprepare,
.start = k3_m4_rproc_start,
.stop = k3_m4_rproc_stop,
.attach = k3_m4_rproc_attach,
--
2.34.1
Powered by blists - more mailing lists