| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87bjwnzw1i.wl-tiwai@suse.de>
Date: Fri, 03 Jan 2025 17:44:57 +0100
From: Takashi Iwai <tiwai@...e.de>
To: Baojun Xu <baojun.xu@...com>
Cc:<tiwai@...e.de>,<robh+dt@...nel.org>,<andriy.shevchenko@...ux.intel.com>,
<lgirdwood@...il.com>,<perex@...ex.cz>,<shenghao-ding@...com>,
<navada@...com>,<13916275206@....com>,<v-hampiholi@...com>,<v-po@...com>,
<linux-sound@...r.kernel.org>,<linux-kernel@...r.kernel.org>,
<liam.r.girdwood@...el.com>,<yung-chuan.liao@...ux.intel.com>,
<broonie@...nel.org>,<antheas.dk@...il.com>, "Rafael J. Wysocki"
<rafael@...nel.org>, linux-acpi@...r.kernel.org, Hans de Goede
<hdegoede@...hat.com>, "Ilpo Järvinen"
<ilpo.jarvinen@...ux.intel.com>, platform-driver-x86@...r.kernel.org
Subject: Re: [PATCH v12] ALSA: hda/tas2781: Add tas2781 hda SPI driver
On Mon, 16 Dec 2024 13:20:08 +0100,
Baojun Xu wrote:
>
> This patch was used to add TAS2781 devices on SPI support in sound/pci/hda.
> It use ACPI node descript about parameters of TAS2781 on SPI, it like:
> Scope (_SB.PC00.SPI0)
> {
> Device (GSPK)
> {
> Name (_HID, "TXNW2781") // _HID: Hardware ID
> Method (_CRS, 0, NotSerialized)
> {
> Name (RBUF, ResourceTemplate ()
> {
> SpiSerialBusV2 (...)
> SpiSerialBusV2 (...)
> }
> }
> }
> }
>
> And in platform/x86/serial-multi-instantiate.c, those spi devices will be
> added into system as a single SPI device, so TAS2781 SPI driver will
> probe twice for every single SPI device. And driver will also parser
> mono DSP firmware binary and RCA binary for itself.
> The code support Realtek as the primary codec.
> In patch version-10, add multi devices firmware binary support,
> to compatble with windows driver, they can share same firmware binary.
>
> Signed-off-by: Baojun Xu <baojun.xu@...com>
>
> ---
> v12:
> - Reture real error in tas2781_save_calibration().
> - Change tas_priv->rcabin.profile_cfg_id to 0 after reset.
> - Add tas2781_spi_reset() in system suspend.
> - Remove apply_calibration in system resume, it will cause no sound.
> - Change unaligned.h include directory from asm to linux.
> v11:
> - Define config number for pre-reset and post-reset scripts.
> - Remove acpi_subsystem_id as it was not used.
> - Change variables order in structure, to avoid possible memory holes.
> - Remove pre-reset and post-reset scripts in reset function.
> - Change variables name to more common.
> - Add pre-reset and post-reset scripts in fw_ready.
> - Add empty line after end of function.
> - Remove reset function before fw ready.
> - Add result check for tasdevice_spi_prmg_load().
> - Return real result of tasdevice_load_block_kernel().
> - Change code for ppcver check, and update debug message.
> - Remove load_calib_data() as no calibration data in firmware now.
> - Remove tasdevice_spi_select_tuningprm_cfg() as config will be forced
> downloaded after program download.
> - Change comments for tasdevice_spi_tuning_switch().
> - Remove unnecessary brace.
> v10:
> - Remove project id 103c8b93 in Patch_realtek.c, as it was used
> for test only, offcial project id is 103c8daa (Gemtree).
> - Add TAS2781_REG_CLK_CONFIG for check if AMP has been reset.
> - Add table for pre-reset and post-reset.
> - Perform pre-reset config before reset AMP.
> - Perform post-reset config after reset AMP.
> - Fix wrong offset in calibration data issue.
> - Remove tuning switch after firmware download.
> - Force stop play in runtime suspend.
> - Apply patch for component change in bind & unbind.
> - Remove program download and calibration data apply,
> switch tuning only in runtime resume.
> - Check if AMP has reseted in system resume,
> and do firmware download and calibration data apply.
> - Change flag 0xCx to 0x8x for coeff data force download.
> - Add device index for multi device firmware binary file compatible.
> - Check device index before registers write during firmware download.
> - Force config data download after program download.
> - Remove config download in tuning switch.
> v9:
> - Add parentheses for variables in micro define.
> - Add define for calibration registers address identify.
> - Change variable name from calibration_data to cali_data.
> - Add variable for calibration registers address in struct tasdevice_priv.
> - Change format for alignment to parentheses.
> - Remove tas2781_reg_defaults as it will be over write in firmware download.
> - Remove RESET for second device in tas2781_spi_reset(),
> as it will cause no sound on second device.
> - Add calibration registers address initial in tasdevice_spi_init().
> - Remove unnecessary parentheses.
> - Remove exception in tas2781_hda_playback_hook().
> - Remove hard code for calibration registers address.
> - Add support for calibration data format V3 for registers address identify,
> as new firmware tool will define calibration registers address dynamic,
> so can't hard code it, need read it from BIOS with calibration data.
> - Remove some debug print.
> - Change hard code value (3) to ARRAY_SIZE(tas2781_snd_controls)/2.
> - New patch apply for change position of component_del().
> - Change label from out, out1 to config_err and block_err.
> - Remove unnecessary parentheses in tas2781_spi_fwlib.c.
> - Remove tasdevice_spi_prmg_calibdata_load().
> v8:
> - Move *-y position in sound/pci/hda/Makefile.
> - Change + to | for bit operation in macro define.
> - Change TASDEVICE_Checksum to TASDEVICE_CHECKSUM.
> v7:
> - Add new project Gemtree (0x103c8daa) support for tas2781 spi driver.
> v6:
> - Remove client in tasdevice_priv struct as it was not used.
> - Change format for tasdevice_spi_dev_write() in tas2781_hda_spi.c.
> - Change update bits function to read & write mode, as tas2781 use last bit
> to mask read & write, it cause regmap_update_bits work not as our expected.
> - Add element in tas2781_snd_controls, tas2781_prof_ctrl,
> tas2781_dsp_conf_ctrl, to support second device.
> Previous version add sound card for first index only.
> - Change calibration registers address declaire to TASDEVICE_REG() mode.
> - Add snd_ctl_new1() for second device.
> - Change format for tas2781_hda_unbind() to fit 79 chars in one line.
> - Remove client for spi as it was not used.
> - Remove unused variables.
> - Remove cur_prog clean in runtime_suspend().
> - Remove unused variables.
> - Add tasdevice_spi_tuning_switch() in runtime_resume.
> - Remove cur_prog clean in system_resume().
> - Add tuning switch if playback started in system_resume().
> - Change TASDEVICE_PAGE_REG to TASDEVICE_REG_ID in tas2781_spi_fwlib.c.
> - Remove calibration binary load functions as data will be loaded from EFI.
> v5:
> - Combined all modification into one patch for pass the compile.
> - Remove old hardware id "TIAS2781" as no production on market.
> - Change max page size to 256 in tas2781-spi.h.
> - Change book reg from 127 to GENMASK(7, 1), as one bit shift is needed.
> - Change register address define as one bit shift needed for offset.
> - Change block check sum comments to Firmware block from I2C.
> - Change define of (page + reg) to TASDEVICE_PAGE_REG from TASDEVICE_PGRG.
> - Change to lower case in defined value.
> - Add registers default value table in tas2781_hda_spi.c
> - Change rang_max to 256 * 256.
> - Add zero_flag_mask in regmap_config.
> - Change max_register to 256 * 256.
> - Add registers default table into structure regmap_config.
> - Change parameter from book number to whole register address.
> - Remove page 0 switch as SPI driver will do it.
> - Add bit(0) for read function as tas2781 will check last bit of address,
> to determine operation mode is read (1) or write (0).
> - Change switch case to if check in tas2781_hda_playback_hook(),
> as it may cause compile problem in clang-19 building.
> - Change variable declaration position.
> - Change order in if check.
> - Remove old hardware id ("TIAS2781") support.
> - Remove debug message in runtime suspend and resume.
> - Remove regmap.h include in tas2781_spi_fwlib.c.
> - Remove MODULE_ in fwlib as this file will work with tas2781_hda_spi.c only.
> v4:
> - Add old hardware id "TIAS2781" for compatible with old production
> - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs
> v4:
> - Add old hardware id "TIAS2781" for compatible with old production
> - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs
> - Move include of sound/tas2781-dsp.h to c source file tas2781_hda_spi.c,
> tas2781_spi_fwlib.c, as it's not needed in header file tas2781-spi.h
> - Use page and book number define in other micro define
> - Change 4000000 to (4 * HZ_PER_MHZ)
> - Add define for calibration variable name and size in UEFI.
> - Remove structure tasdevice & tasdevice_irqinfo, and move variables in to
> structure tasdevice_priv
> - Remove some unused variables in sttructure tasdevice_priv
> - Remove function declare of tascodec_init(), use tascodec_spi_init()
> - Remove function declare of tasdevice_remove()
> - Add array_size.h included in tas2781_hda_spi.c
> - Add cleanup.h included for change mutex to guard
> - Add units.h included
> - Include tas2781-dsp.h
> - Remove unused variables in tas2781_hda structure
> - Change 0xff to GENMASK(7, 0)
> - Change 128 to define of max page size
> - Change code as all variables was moved to tasdevice_priv structure
> - Change comments for error in book write, or page write
> - Remove initial of ret, and return 0 directly
> - Change comments for wrong typo, add space in front and end
> - Add check for bulk read, max size should be a page size
> - Change usleep_rang() to fsleep()
> - Change mutex_lock to guard(mutex), and remove mutex_unlock()
> - Change tasdevice_spi_init() to void from int as no value return required
> - Change second parameter to sizeof
> - Remove tasdevice_clamp(), use clamp()
> - Add compatible with old hardware id "TIAS2781"
> - Remove cs_gpio and spi device in tas2781_read_acpi() as use default CS
> - Change dev-index check, return -EINVAL if it's <= 0
> - Change 0xFF to U8_MAX
> - Remove GPIO get for chip-select, use default from SPI device
> - Perform RESET in first AMP only as all AMPs share same RESET pin
> - return 0 directly in some simple routine to avoid variable initial
> - Change comments for function which was used by system
> - Change "ON" "OFF" to function str_on_off(...)
> - Change format of GUID
> - Add temp buffer for first efi.get_variable()
> - Free data if it was allocated
> - Change format of debug message of calibration date time print
> - Remove total_sz = 0, as it's not needed
> - Move save_calibration to after tuning_switch to avoid calibration data
> overwrite
> - Remove dev from structure tasdevice_hda, use dev in tasdevice_priv
> - Remove 0 from { "tas2781-hda", 0}, & {"TXNW2781", 0},
> - Add old hardware id "TIAS2781" for compatible with old production
> - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs
> v3:
> - Move HID up to above /* Non-conforming _HID ... */ in scan.c,
> for avoid misunderstanding.
> - Move HID up to above /* Non-conforming _HID ... */ in
> serial-multi-instantiate.c, for avoid misunderstanding.
> - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile.
> - Change format for some define in tas2781-spi.h.
> - Add define for TASDEVICE_MAX_BOOK_NUM, TASDEVICE_MAX_PAGE.
> - Move declare of "enum calib_data {" to header file from source file.
> - Remove "enum device_catlog_id {" as only one platform was supported now.
> - Remove "struct calidata", as we will save pure calibration data only.
> - Remove "struct calidata", "enum device_catlog_id" in tasdevice_priv.
> - Add calibration_data in tasdevice_priv to save pure calibration data.
> - Remove declare of tasdevice_save_calibration() and
> tasdevice_apply_calibration(), as it will be used within same c file.
> - Add below header files included in tas2781_hda_spi.c:
> bits.h, mutex.h, property.h, time.h, types.h.
> - Move two micro define to header file tas2781-spi.h.
> - Change format of some micro define.
> - Change format of some structure.
> - Remove irq in tas2781_hda, as have it already in tasdevice_priv.
> - Remove some local functions declare as not necessarily.
> - Return error if regmap_write() failed.
> - Change fixed value 2 to sizeof(data).
> - Remove all of EXPORT_SYMBOL_GPL,
> as all of function was called within same module.
> - Remove empty line after last return in some functions.
> - Remove some variable initialyzation.
> - Remove variable sub, store acpi_subsystem_id directly.
> - Remove wrong comments for device index, it's must, can't be NULL.
> - Remove some local variables, use elements in structure directly.
> - Append commas in last element of an array.
> - Change calibration data process, didn't save all of calibration data in EFI,
> get in local, and save pure calibration data in tasdevice_priv.
> - Call tasdevice_save_calibration() from function pointer in tasdevice_priv;
> - Remove subid as one platform was supported only, needn't check.
> - Add initialyzation for local variable.
> - Move regmap initialyzation to before acpi read.
> - Call tasdevice_apply_calibration() from function pointer in tasdevice_priv;
> - Remove MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB), as all functions was
> performed within same module.
> - Update format and variables declare order.
> - Change format of multi conditions for if.
> - Remove casting which is not needed.
> - Change variables type to avoid casting.
> - Remove Unneeded parentheses.
> - Change if check to avoid goto.
> - Add {} for keep same style.
> - Remove some local variables, use elements in structure directly.
> v2:
> - Change depends on SPI to SPI_MASTER in sound/pci/hda/Kconfig
> - Add select SND_HDA_SCODEC_COMPONENT in sound/pci/hda/Kconfig
> - Change comp_generic_fixup() 5th parameter from "-%s:00" to
> "-%s:00-tas2781-hda.%d" in sound/pci/hda/patch_realtek.c
> - Change chain_id from ALC285_FIXUP_THINKPAD_HEADSET_JACK to
> ALC285_FIXUP_HP_GPIO_LED in sound/pci/hda/patch_realtek.c
> - Remove project name "Gemtree"
> - Update information in file header of tas2781-spi.h.
> - Remove useless micro define.
> - Change TASDEVICE_I2CChecksum to TASDEVICE_Checksum
> - Remove enum control_bus as current code support SPI only.
> - Remove device define as current code support TAS2781 only.
> - Remove spi_device **spi_devs in structure tasdevice_priv.
> - Remove cal_binaryname in structure tasdevice_priv.
> - Remove ndev in structure tasdevice_priv.
> - Change isacpi and isspi, replace by control_bus(I2C or SPI).
> - Remove void tasdevice_spi_dsp_remove(void *context).
> - Add acpi_device and irq in structure tas2781_hda in tas2781_hda_spi.c.
> - Remove parameter chn in all of registers access functions.
> - Add tascodec_spi_init().
> - Add chip select gpio set for SPI device.
> - Change tasdevice_tuning_switch() to tasdevice_spi_tuning_switch().
> - Change device offset from tas_priv->ndev to tas_priv->index.
> - Change tasdevice_dsp_remove() to tasdevice_spi_dsp_remove().
> - tasdevice_prmg_load() to tasdevice_spi_prmg_load().
> - Change tasdevice_config_info_remove() to
> tasdevice_spi_config_info_remove().
> - Add one dummy byte shift when read from page 2~127, or not book 0.
> - Change tasdevice_spi_change_chn_book() to tasdevice_spi_switch_book()
> - Perform put_device(physdev) before error return.
> - Change calibration data id to 2781 from 2783 in EFI
> - Change calibration data structure name in comments.
> - Remove file name in tas2781_spi_fwlib.c.
> - Remove #include <linux/i2c.h> as it not needed in SPI mode.
> - Change TAB to speace in micro define in tas2781_spi_fwlib.c.
> - Change to up-case for DSP.
> - Change all of multi-line comments format, empty first line.
> - Change all of sizeof(struct xx) to sizeof(*xx).
> - Remove Explicit casting for variables compare to avoid possible fault.
> - Return directly without goto.
> - Change 1 << xx to BIT(xx).
> - Remove deviceNumber[] as current SPI device will support one device only.
> - Add memory free before return error.
> - Change "buf[offset]; offset += 1" to buf[offset++].
> - Remove some debug information print.
> - Change firmware binary to single device mode.
> - Change all bexx_to_cpup() to get_unaligned_bexx().
> - Remove ndev process as current SPI device support single device only.
> - Remove chn and chnend for single device support only.
> - Change all of registers read/write function, remove parameter chn.
> - Create new function for single write, burst write, delay, field write
> in tasdevice_process_block().
> ---
> drivers/acpi/scan.c | 1 +
> .../platform/x86/serial-multi-instantiate.c | 12 +
> sound/pci/hda/Kconfig | 14 +
> sound/pci/hda/Makefile | 2 +
> sound/pci/hda/patch_realtek.c | 14 +
> sound/pci/hda/tas2781-spi.h | 158 ++
> sound/pci/hda/tas2781_hda_spi.c | 1271 +++++++++++
> sound/pci/hda/tas2781_spi_fwlib.c | 2008 +++++++++++++++++
> 8 files changed, 3480 insertions(+)
So this series reached already v12, and we'd really like to take in
some form. Although the code is still much more complex than I
wished, it's more or less readable and understandable in some level,
so I'm fine about the sound/* part.
OTOH, this contains also the changes for drivers/acpi/scan.c and
drivers/platform/x86/serial-multi-instantiate.c, and those need Acks
from the corresponding people, but it missed Cc to them (and MLs).
Now I put them to Cc.
Rafael, Hans, Ilpo, Andy, anyone else - could you guys check it?
thanks,
Takashi
> create mode 100644 sound/pci/hda/tas2781-spi.h
> create mode 100644 sound/pci/hda/tas2781_hda_spi.c
> create mode 100644 sound/pci/hda/tas2781_spi_fwlib.c
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 74dcccdc6482..55a9a3d5afa8 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1769,6 +1769,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> {"CSC3557", },
> {"INT33FE", },
> {"INT3515", },
> + {"TXNW2781", },
> /* Non-conforming _HID for Cirrus Logic already released */
> {"CLSA0100", },
> {"CLSA0101", },
> diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> index ed6b28505cd6..db030b0f176a 100644
> --- a/drivers/platform/x86/serial-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -384,6 +384,17 @@ static const struct smi_node cs35l57_hda = {
> .bus_type = SMI_AUTO_DETECT,
> };
>
> +static const struct smi_node tas2781_hda = {
> + .instances = {
> + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> + {}
> + },
> + .bus_type = SMI_AUTO_DETECT,
> +};
> +
> /*
> * Note new device-ids must also be added to ignore_serial_bus_ids in
> * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> @@ -396,6 +407,7 @@ static const struct acpi_device_id smi_acpi_ids[] = {
> { "CSC3556", (unsigned long)&cs35l56_hda },
> { "CSC3557", (unsigned long)&cs35l57_hda },
> { "INT3515", (unsigned long)&int3515_data },
> + { "TXNW2781", (unsigned long)&tas2781_hda },
> /* Non-conforming _HID for Cirrus Logic already released */
> { "CLSA0100", (unsigned long)&cs35l41_hda },
> { "CLSA0101", (unsigned long)&cs35l41_hda },
> diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
> index 68f1eee9e5c9..ca3f5b69b521 100644
> --- a/sound/pci/hda/Kconfig
> +++ b/sound/pci/hda/Kconfig
> @@ -206,6 +206,20 @@ config SND_HDA_SCODEC_TAS2781_I2C
> comment "Set to Y if you want auto-loading the side codec driver"
> depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m
>
> +config SND_HDA_SCODEC_TAS2781_SPI
> + tristate "Build TAS2781 HD-audio side codec support for SPI Bus"
> + depends on SPI_MASTER
> + depends on ACPI
> + depends on EFI
> + depends on SND_SOC
> + select CRC32_SARWATE
> + help
> + Say Y or M here to include TAS2781 SPI HD-audio side codec support
> + in snd-hda-intel driver, such as ALC287.
> +
> +comment "Set to Y if you want auto-loading the side codec driver"
> + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m
> +
> config SND_HDA_CODEC_REALTEK
> tristate "Build Realtek HD-audio codec support"
> select SND_HDA_GENERIC
> diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
> index 80210f845df2..210c406dfbc5 100644
> --- a/sound/pci/hda/Makefile
> +++ b/sound/pci/hda/Makefile
> @@ -40,6 +40,7 @@ snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o
> snd-hda-cs-dsp-ctls-y := hda_cs_dsp_ctl.o
> snd-hda-scodec-component-y := hda_component.o
> snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o
> +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o
>
> # common driver
> obj-$(CONFIG_SND_HDA) := snd-hda-codec.o
> @@ -72,6 +73,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o
> obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o
> obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o
> obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o
> +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o
>
> # this must be the last entry after codec drivers;
> # otherwise the codec patches won't be hooked before the PCI probe
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 17392b21d5bf..f457e879ba42 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -7128,6 +7128,11 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc,
> comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1);
> }
>
> +static void tas2781_fixup_spi(struct hda_codec *cdc, const struct hda_fixup *fix, int action)
> +{
> + comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2);
> +}
> +
> static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc,
> const struct hda_fixup *fix, int action)
> {
> @@ -7761,6 +7766,7 @@ enum {
> ALC236_FIXUP_DELL_DUAL_CODECS,
> ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
> ALC287_FIXUP_TAS2781_I2C,
> + ALC245_FIXUP_TAS2781_SPI_2,
> ALC287_FIXUP_YOGA7_14ARB7_I2C,
> ALC245_FIXUP_HP_MUTE_LED_COEFBIT,
> ALC245_FIXUP_HP_X360_MUTE_LEDS,
> @@ -9965,6 +9971,12 @@ static const struct hda_fixup alc269_fixups[] = {
> .chained = true,
> .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK,
> },
> + [ALC245_FIXUP_TAS2781_SPI_2] = {
> + .type = HDA_FIXUP_FUNC,
> + .v.func = tas2781_fixup_spi,
> + .chained = true,
> + .chain_id = ALC285_FIXUP_HP_GPIO_LED,
> + },
> [ALC287_FIXUP_YOGA7_14ARB7_I2C] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = yoga7_14arb7_fixup_i2c,
> @@ -10526,6 +10538,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
> SND_PCI_QUIRK(0x103c, 0x8d84, "HP EliteBook X G1i", ALC285_FIXUP_HP_GPIO_LED),
> SND_PCI_QUIRK(0x103c, 0x8d91, "HP ZBook Firefly 14 G12", ALC285_FIXUP_HP_GPIO_LED),
> SND_PCI_QUIRK(0x103c, 0x8d92, "HP ZBook Firefly 16 G12", ALC285_FIXUP_HP_GPIO_LED),
> + SND_PCI_QUIRK(0x103c, 0x8de8, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
> + SND_PCI_QUIRK(0x103c, 0x8de9, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
> SND_PCI_QUIRK(0x103c, 0x8e18, "HP ZBook Firefly 14 G12A", ALC285_FIXUP_HP_GPIO_LED),
> SND_PCI_QUIRK(0x103c, 0x8e19, "HP ZBook Firefly 14 G12A", ALC285_FIXUP_HP_GPIO_LED),
> SND_PCI_QUIRK(0x103c, 0x8e1a, "HP ZBook Firefly 14 G12A", ALC285_FIXUP_HP_GPIO_LED),
> diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h
> new file mode 100644
> index 000000000000..ecfc3c8bb821
> --- /dev/null
> +++ b/sound/pci/hda/tas2781-spi.h
> @@ -0,0 +1,158 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +//
> +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier
> +//
> +// Copyright (C) 2024 Texas Instruments Incorporated
> +// https://www.ti.com
> +//
> +// The TAS2781 driver implements a flexible and configurable
> +// algo coefficient setting for TAS2781 chips.
> +//
> +// Author: Baojun Xu <baojun.xu@...com>
> +//
> +
> +#ifndef __TAS2781_SPI_H__
> +#define __TAS2781_SPI_H__
> +
> +#define TASDEVICE_RATES \
> + (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
> + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200)
> +
> +#define TASDEVICE_FORMATS \
> + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
> + SNDRV_PCM_FMTBIT_S32_LE)
> +
> +#define TASDEVICE_MAX_BOOK_NUM 256
> +#define TASDEVICE_MAX_PAGE 256
> +
> +#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE)
> +
> +/* PAGE Control Register (available in page0 of each book) */
> +#define TASDEVICE_PAGE_SELECT 0x00
> +#define TASDEVICE_BOOKCTL_PAGE 0x00
> +#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1)
> +#define TASDEVICE_BOOK_ID(reg) (((reg) & GENMASK(24, 16)) >> 16)
> +#define TASDEVICE_PAGE_ID(reg) (((reg) & GENMASK(15, 8)) >> 8)
> +#define TASDEVICE_REG_ID(reg) (((reg) & GENMASK(7, 1)) >> 1)
> +#define TASDEVICE_PAGE_REG(reg) ((reg) & GENMASK(15, 1))
> +#define TASDEVICE_REG(book, page, reg) \
> + (((book) << 16) | ((page) << 8) | ((reg) << 1))
> +
> +/* Software Reset */
> +#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01)
> +#define TAS2781_REG_SWRESET_RESET BIT(0)
> +
> +/* System Reset Check Register */
> +#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c)
> +#define TAS2781_REG_CLK_CONFIG_RESET (0x19)
> +#define TAS2781_PRE_POST_RESET_CFG 3
> +
> +/* Block Checksum */
> +#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e)
> +
> +/* Volume control */
> +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a)
> +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03)
> +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1)
> +
> +#define TASDEVICE_CMD_SING_W 0x1
> +#define TASDEVICE_CMD_BURST 0x2
> +#define TASDEVICE_CMD_DELAY 0x3
> +#define TASDEVICE_CMD_FIELD_W 0x4
> +
> +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ)
> +
> +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d
> +#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20
> +
> +/* Flag of calibration registers address. */
> +#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7)
> +
> +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA"
> +#define TASDEVICE_CALIBRATION_DATA_SIZE 256
> +
> +enum calib_data {
> + R0_VAL = 0,
> + INV_R0,
> + R0LOW,
> + POWER,
> + TLIM,
> + CALIB_MAX
> +};
> +
> +struct tasdevice_priv {
> + struct tasdevice_fw *cali_data_fmw;
> + struct tasdevice_rca rcabin;
> + struct tasdevice_fw *fmw;
> + struct gpio_desc *reset;
> + struct mutex codec_lock;
> + struct regmap *regmap;
> + struct device *dev;
> + struct tm tm;
> +
> + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE];
> + unsigned char coef_binaryname[64];
> + unsigned char rca_binaryname[64];
> + unsigned char dev_name[32];
> +
> + bool force_fwload_status;
> + bool playback_started;
> + bool is_loading;
> + bool is_loaderr;
> + unsigned int cali_reg_array[CALIB_MAX];
> + unsigned int cali_data[CALIB_MAX];
> + unsigned int err_code;
> + void *codec;
> + int cur_book;
> + int cur_prog;
> + int cur_conf;
> + int fw_state;
> + int index;
> + int irq;
> +
> + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv,
> + const struct firmware *fmw,
> + int offset);
> + int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw,
> + const struct firmware *fmw, int offset);
> + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw,
> + const struct firmware *fmw,
> + int offset);
> + int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block);
> +
> + int (*save_calibration)(struct tasdevice_priv *tas_priv);
> + void (*apply_calibration)(struct tasdevice_priv *tas_priv);
> +};
> +
> +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv,
> + unsigned int reg, unsigned int *value);
> +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv,
> + unsigned int reg, unsigned int value);
> +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv,
> + unsigned int reg, unsigned char *p_data,
> + unsigned int n_length);
> +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv,
> + unsigned int reg, unsigned char *p_data,
> + unsigned int n_length);
> +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice,
> + unsigned int reg, unsigned int mask,
> + unsigned int value);
> +
> +void tasdevice_spi_select_cfg_blk(void *context, int conf_no,
> + unsigned char block_type);
> +void tasdevice_spi_config_info_remove(void *context);
> +int tasdevice_spi_dsp_parser(void *context);
> +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw);
> +void tasdevice_spi_dsp_remove(void *context);
> +void tasdevice_spi_calbin_remove(void *context);
> +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, int cfg_no,
> + int rca_conf_no);
> +int tasdevice_spi_prmg_load(void *context, int prm_no);
> +int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no);
> +void tasdevice_spi_tuning_switch(void *context, int state);
> +int tas2781_spi_load_calibration(void *context, char *file_name,
> + unsigned short i);
> +#endif /* __TAS2781_SPI_H__ */
> diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c
> new file mode 100644
> index 000000000000..8068c70b7014
> --- /dev/null
> +++ b/sound/pci/hda/tas2781_hda_spi.c
> @@ -0,0 +1,1271 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// TAS2781 HDA SPI driver
> +//
> +// Copyright 2024 Texas Instruments, Inc.
> +//
> +// Author: Baojun Xu <baojun.xu@...com>
> +
> +#include <linux/acpi.h>
> +#include <linux/array_size.h>
> +#include <linux/bits.h>
> +#include <linux/cleanup.h>
> +#include <linux/crc8.h>
> +#include <linux/crc32.h>
> +#include <linux/efi.h>
> +#include <linux/firmware.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +#include <linux/time.h>
> +#include <linux/types.h>
> +#include <linux/units.h>
> +
> +#include <sound/hda_codec.h>
> +#include <sound/soc.h>
> +#include <sound/tas2781-dsp.h>
> +#include <sound/tlv.h>
> +#include <sound/tas2781-tlv.h>
> +
> +#include "tas2781-spi.h"
> +
> +#include "hda_local.h"
> +#include "hda_auto_parser.h"
> +#include "hda_component.h"
> +#include "hda_jack.h"
> +#include "hda_generic.h"
> +
> +/*
> + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD
> + * Define two controls, one is Volume control callbacks, the other is
> + * flag setting control callbacks.
> + */
> +
> +/* Volume control callbacks for tas2781 */
> +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
> + xhandler_get, xhandler_put, tlv_array) { \
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \
> + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
> + SNDRV_CTL_ELEM_ACCESS_READWRITE, \
> + .tlv.p = (tlv_array), \
> + .info = snd_soc_info_volsw_range, \
> + .get = xhandler_get, .put = xhandler_put, \
> + .private_value = (unsigned long)&(struct soc_mixer_control) { \
> + .reg = xreg, .rreg = xreg, \
> + .shift = xshift, .rshift = xshift,\
> + .min = xmin, .max = xmax, .invert = xinvert, \
> + } \
> +}
> +
> +/* Flag control callbacks for tas2781 */
> +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \
> + .name = xname, \
> + .info = snd_ctl_boolean_mono_info, \
> + .get = xhandler_get, \
> + .put = xhandler_put, \
> + .private_value = xdata, \
> +}
> +
> +struct tas2781_hda {
> + struct tasdevice_priv *priv;
> + struct acpi_device *dacpi;
> + struct snd_kcontrol *dsp_prog_ctl;
> + struct snd_kcontrol *dsp_conf_ctl;
> + struct snd_kcontrol *snd_ctls[3];
> + struct snd_kcontrol *prof_ctl;
> +};
> +
> +static const struct regmap_range_cfg tasdevice_ranges[] = {
> + {
> + .range_min = 0,
> + .range_max = TASDEVICE_MAX_SIZE,
> + .selector_reg = TASDEVICE_PAGE_SELECT,
> + .selector_mask = GENMASK(7, 0),
> + .selector_shift = 0,
> + .window_start = 0,
> + .window_len = TASDEVICE_MAX_PAGE,
> + },
> +};
> +
> +static const struct regmap_config tasdevice_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .zero_flag_mask = true,
> + .cache_type = REGCACHE_NONE,
> + .ranges = tasdevice_ranges,
> + .num_ranges = ARRAY_SIZE(tasdevice_ranges),
> + .max_register = TASDEVICE_MAX_SIZE,
> +};
> +
> +static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret;
> +
> + if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) {
> + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG,
> + TASDEVICE_BOOK_ID(reg));
> + if (ret < 0) {
> + dev_err(tas_priv->dev, "Switch Book E=%d\n", ret);
> + return ret;
> + }
> + tas_priv->cur_book = TASDEVICE_BOOK_ID(reg);
> + }
> + return ret;
> +}
> +
> +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv,
> + unsigned int reg,
> + unsigned int *val)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret;
> +
> + ret = tasdevice_spi_switch_book(tas_priv, reg);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * In our TAS2781 SPI mode, if read from other book (not book 0),
> + * or read from page number larger than 1 in book 0, one more byte
> + * read is needed, and first byte is a dummy byte, need to be ignored.
> + */
> + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) {
> + unsigned char data[2];
> +
> + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1,
> + data, sizeof(data));
> + *val = data[1];
> + } else {
> + ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val);
> + }
> + if (ret < 0)
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv,
> + unsigned int reg,
> + unsigned int value)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret;
> +
> + ret = tasdevice_spi_switch_book(tas_priv, reg);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value);
> + if (ret < 0)
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv,
> + unsigned int reg,
> + unsigned char *data,
> + unsigned int len)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret;
> +
> + ret = tasdevice_spi_switch_book(tas_priv, reg);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len);
> + if (ret < 0)
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv,
> + unsigned int reg,
> + unsigned char *data,
> + unsigned int len)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret;
> +
> + ret = tasdevice_spi_switch_book(tas_priv, reg);
> + if (ret < 0)
> + return ret;
> +
> + if (len > TASDEVICE_MAX_PAGE)
> + len = TASDEVICE_MAX_PAGE;
> + /*
> + * In our TAS2781 SPI mode, if read from other book (not book 0),
> + * or read from page number larger than 1 in book 0, one more byte
> + * read is needed, and first byte is a dummy byte, need to be ignored.
> + */
> + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) {
> + unsigned char buf[TASDEVICE_MAX_PAGE+1];
> +
> + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf,
> + len + 1);
> + memcpy(data, buf + 1, len);
> + } else {
> + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data,
> + len);
> + }
> + if (ret < 0)
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv,
> + unsigned int reg,
> + unsigned int mask,
> + unsigned int value)
> +{
> + struct regmap *map = tas_priv->regmap;
> + int ret, val;
> +
> + /*
> + * In our TAS2781 SPI mode, read/write was masked in last bit of
> + * address, it cause regmap_update_bits() not work as expected.
> + */
> + ret = tasdevice_spi_dev_read(tas_priv, reg, &val);
> + if (ret < 0) {
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> + return ret;
> + }
> + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg),
> + (val & ~mask) | (mask & value));
> + if (ret < 0)
> + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +static void tas2781_spi_reset(struct tasdevice_priv *tas_dev)
> +{
> + int ret;
> +
> + if (tas_dev->reset) {
> + gpiod_set_value_cansleep(tas_dev->reset, 0);
> + fsleep(800);
> + gpiod_set_value_cansleep(tas_dev->reset, 1);
> + }
> + ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET,
> + TAS2781_REG_SWRESET_RESET);
> + if (ret < 0)
> + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret);
> + fsleep(1000);
> +}
> +
> +static int tascodec_spi_init(struct tasdevice_priv *tas_priv,
> + void *codec, struct module *module,
> + void (*cont)(const struct firmware *fw, void *context))
> +{
> + int ret;
> +
> + /*
> + * Codec Lock Hold to ensure that codec_probe and firmware parsing and
> + * loading do not simultaneously execute.
> + */
> + guard(mutex)(&tas_priv->codec_lock);
> +
> + ret = scnprintf(tas_priv->rca_binaryname,
> + sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin",
> + tas_priv->dev_name, tas_priv->index);
> + if (ret <= 0) {
> + dev_err(tas_priv->dev, "rca name err:0x%08x\n", ret);
> + return ret;
> + }
> + crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL);
> + tas_priv->codec = codec;
> + ret = request_firmware_nowait(module, FW_ACTION_UEVENT,
> + tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv,
> + cont);
> + if (ret)
> + dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n",
> + ret);
> +
> + return ret;
> +}
> +
> +static void tasdevice_spi_init(struct tasdevice_priv *tas_priv)
> +{
> + tas_priv->cur_prog = -1;
> + tas_priv->cur_conf = -1;
> +
> + tas_priv->cur_book = -1;
> + tas_priv->cur_prog = -1;
> + tas_priv->cur_conf = -1;
> +
> + /* Store default registers address for calibration data. */
> + tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74);
> + tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c);
> + tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14);
> + tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70);
> + tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c);
> +
> + mutex_init(&tas_priv->codec_lock);
> +}
> +
> +static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv,
> + struct snd_ctl_elem_value *ucontrol,
> + struct soc_mixer_control *mc)
> +{
> + unsigned int invert = mc->invert;
> + unsigned char mask;
> + int max = mc->max;
> + int val, ret;
> +
> + mask = rounddown_pow_of_two(max);
> + mask <<= mc->shift;
> + val = clamp(invert ? max - ucontrol->value.integer.value[0] :
> + ucontrol->value.integer.value[0], 0, max);
> + ret = tasdevice_spi_dev_update_bits(tas_priv,
> + mc->reg, mask, (unsigned int)(val << mc->shift));
> + if (ret)
> + dev_err(tas_priv->dev, "set AMP vol error in dev %d\n",
> + tas_priv->index);
> +
> + return ret;
> +}
> +
> +static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv,
> + struct snd_ctl_elem_value *ucontrol,
> + struct soc_mixer_control *mc)
> +{
> + unsigned int invert = mc->invert;
> + unsigned char mask = 0;
> + int max = mc->max;
> + int ret, val;
> +
> + /* Read the primary device */
> + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val);
> + if (ret) {
> + dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__);
> + return ret;
> + }
> +
> + mask = rounddown_pow_of_two(max);
> + mask <<= mc->shift;
> + val = (val & mask) >> mc->shift;
> + val = clamp(invert ? max - val : val, 0, max);
> + ucontrol->value.integer.value[0] = val;
> +
> + return ret;
> +}
> +
> +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv,
> + struct snd_ctl_elem_value *ucontrol,
> + struct soc_mixer_control *mc)
> +{
> + unsigned int invert = mc->invert;
> + int max = mc->max;
> + int val, ret;
> +
> + val = clamp(invert ? max - ucontrol->value.integer.value[0] :
> + ucontrol->value.integer.value[0], 0, max);
> + ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val);
> + if (ret)
> + dev_err(tas_priv->dev, "set digital vol err in dev %d\n",
> + tas_priv->index);
> +
> + return ret;
> +}
> +
> +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv,
> + struct snd_ctl_elem_value *ucontrol,
> + struct soc_mixer_control *mc)
> +{
> + unsigned int invert = mc->invert;
> + int max = mc->max;
> + int ret, val;
> +
> + /* Read the primary device as the whole */
> + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val);
> + if (ret) {
> + dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__);
> + return ret;
> + }
> +
> + val = clamp(invert ? max - val : val, 0, max);
> + ucontrol->value.integer.value[0] = val;
> +
> + return ret;
> +}
> +
> +static int tas2781_read_acpi(struct tas2781_hda *tas_hda,
> + const char *hid,
> + int id)
> +{
> + struct tasdevice_priv *p = tas_hda->priv;
> + struct acpi_device *adev;
> + struct device *physdev;
> + u32 values[HDA_MAX_COMPONENTS];
> + const char *property;
> + size_t nval;
> + int ret, i;
> +
> + adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
> + if (!adev) {
> + dev_err(p->dev, "Failed to find ACPI device: %s\n", hid);
> + return -ENODEV;
> + }
> +
> + strscpy(p->dev_name, hid, sizeof(p->dev_name));
> + tas_hda->dacpi = adev;
> + physdev = get_device(acpi_get_first_physical_node(adev));
> + acpi_dev_put(adev);
> +
> + property = "ti,dev-index";
> + ret = device_property_count_u32(physdev, property);
> + if (ret <= 0 || ret > ARRAY_SIZE(values)) {
> + ret = -EINVAL;
> + goto err;
> + }
> + nval = ret;
> +
> + ret = device_property_read_u32_array(physdev, property, values, nval);
> + if (ret)
> + goto err;
> +
> + p->index = U8_MAX;
> + for (i = 0; i < nval; i++) {
> + if (values[i] == id) {
> + p->index = i;
> + break;
> + }
> + }
> + if (p->index == U8_MAX) {
> + dev_dbg(p->dev, "No index found in %s\n", property);
> + ret = -ENODEV;
> + goto err;
> + }
> +
> + if (p->index == 0) {
> + /* All of amps share same RESET pin. */
> + p->reset = devm_gpiod_get_index_optional(physdev, "reset",
> + p->index, GPIOD_OUT_LOW);
> + if (IS_ERR(p->reset)) {
> + dev_err_probe(p->dev, ret, "Failed on reset GPIO\n");
> + goto err;
> + }
> + }
> + put_device(physdev);
> +
> + return 0;
> +err:
> + dev_err(p->dev, "read acpi error, ret: %d\n", ret);
> + put_device(physdev);
> + acpi_dev_put(adev);
> +
> + return ret;
> +}
> +
> +static void tas2781_hda_playback_hook(struct device *dev, int action)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> +
> + if (action == HDA_GEN_PCM_ACT_OPEN) {
> + pm_runtime_get_sync(dev);
> + guard(mutex)(&tas_hda->priv->codec_lock);
> + tasdevice_spi_tuning_switch(tas_hda->priv, 0);
> + } else if (action == HDA_GEN_PCM_ACT_CLOSE) {
> + guard(mutex)(&tas_hda->priv->codec_lock);
> + tasdevice_spi_tuning_switch(tas_hda->priv, 1);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> + }
> +}
> +
> +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 0;
> + uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1;
> +
> + return 0;
> +}
> +
> +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id;
> +
> + return 0;
> +}
> +
> +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + int max = tas_priv->rcabin.ncfgs - 1;
> + int val;
> +
> + val = clamp(ucontrol->value.integer.value[0], 0, max);
> + if (tas_priv->rcabin.profile_cfg_id != val) {
> + tas_priv->rcabin.profile_cfg_id = val;
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 0;
> + uinfo->value.integer.max = tas_priv->fmw->nr_programs - 1;
> +
> + return 0;
> +}
> +
> +static int tasdevice_info_config(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 0;
> + uinfo->value.integer.max = tas_priv->fmw->nr_configurations - 1;
> +
> + return 0;
> +}
> +
> +static int tasdevice_program_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + ucontrol->value.integer.value[0] = tas_priv->cur_prog;
> +
> + return 0;
> +}
> +
> +static int tasdevice_program_put(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + int nr_program = ucontrol->value.integer.value[0];
> + int max = tas_priv->fmw->nr_programs - 1;
> + int val;
> +
> + val = clamp(nr_program, 0, max);
> +
> + if (tas_priv->cur_prog != val) {
> + tas_priv->cur_prog = val;
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +static int tasdevice_config_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + ucontrol->value.integer.value[0] = tas_priv->cur_conf;
> +
> + return 0;
> +}
> +
> +static int tasdevice_config_put(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + int max = tas_priv->fmw->nr_configurations - 1;
> + int val;
> +
> + val = clamp(ucontrol->value.integer.value[0], 0, max);
> +
> + if (tas_priv->cur_conf != val) {
> + tas_priv->cur_conf = val;
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * tas2781_digital_getvol - get the volum control
> + * @kcontrol: control pointer
> + * @ucontrol: User data
> + *
> + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging
> + * depends on internal regmap mechanism.
> + * tas2781 contains book and page two-level register map, especially
> + * book switching will set the register BXXP00R7F, after switching to the
> + * correct book, then leverage the mechanism for paging to access the
> + * register.
> + *
> + * Return 0 if succeeded.
> + */
> +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> +
> + return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc);
> +}
> +
> +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> +
> + return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc);
> +}
> +
> +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> +
> + /* The check of the given value is in tasdevice_digital_putvol. */
> + return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc);
> +}
> +
> +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> +
> + /* The check of the given value is in tasdevice_amp_putvol. */
> + return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc);
> +}
> +
> +static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> +
> + ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status;
> + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
> + str_on_off(tas_priv->force_fwload_status));
> +
> + return 0;
> +}
> +
> +static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
> + bool change, val = (bool)ucontrol->value.integer.value[0];
> +
> + if (tas_priv->force_fwload_status == val) {
> + change = false;
> + } else {
> + change = true;
> + tas_priv->force_fwload_status = val;
> + }
> + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
> + str_on_off(tas_priv->force_fwload_status));
> +
> + return change;
> +}
> +
> +static const struct snd_kcontrol_new tas2781_snd_controls[] = {
> + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 0", TAS2781_AMP_LEVEL,
> + 1, 0, 20, 0, tas2781_amp_getvol,
> + tas2781_amp_putvol, amp_vol_tlv),
> + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 0", TAS2781_DVC_LVL,
> + 0, 0, 200, 1, tas2781_digital_getvol,
> + tas2781_digital_putvol, dvc_tlv),
> + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 0", 0,
> + tas2781_force_fwload_get, tas2781_force_fwload_put),
> + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 1", TAS2781_AMP_LEVEL,
> + 1, 0, 20, 0, tas2781_amp_getvol,
> + tas2781_amp_putvol, amp_vol_tlv),
> + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 1", TAS2781_DVC_LVL,
> + 0, 0, 200, 1, tas2781_digital_getvol,
> + tas2781_digital_putvol, dvc_tlv),
> + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 1", 0,
> + tas2781_force_fwload_get, tas2781_force_fwload_put),
> +};
> +
> +static const struct snd_kcontrol_new tas2781_prof_ctrl[] = {
> +{
> + .name = "Speaker Profile Id - 0",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_profile,
> + .get = tasdevice_get_profile_id,
> + .put = tasdevice_set_profile_id,
> +},
> +{
> + .name = "Speaker Profile Id - 1",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_profile,
> + .get = tasdevice_get_profile_id,
> + .put = tasdevice_set_profile_id,
> +},
> +};
> +static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl[] = {
> +{
> + .name = "Speaker Program Id 0",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_programs,
> + .get = tasdevice_program_get,
> + .put = tasdevice_program_put,
> +},
> +{
> + .name = "Speaker Program Id 1",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_programs,
> + .get = tasdevice_program_get,
> + .put = tasdevice_program_put,
> +},
> +};
> +
> +static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = {
> +{
> + .name = "Speaker Config Id 0",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_config,
> + .get = tasdevice_config_get,
> + .put = tasdevice_config_put,
> +},
> +{
> + .name = "Speaker Config Id 1",
> + .iface = SNDRV_CTL_ELEM_IFACE_CARD,
> + .info = tasdevice_info_config,
> + .get = tasdevice_config_get,
> + .put = tasdevice_config_put,
> +},
> +};
> +
> +static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
> +{
> + int i, rc;
> +
> + /*
> + * If no calibration data exist in tasdevice_priv *tas_priv,
> + * calibration apply will be ignored, and use default values
> + * in firmware binary, which was loaded during firmware download.
> + */
> + if (tas_priv->cali_data[0] == 0)
> + return;
> + /*
> + * Calibration data was saved in tasdevice_priv *tas_priv as:
> + * unsigned int cali_data[CALIB_MAX];
> + * and every data (in 4 bytes) will be saved in register which in
> + * book 0, and page number in page_array[], offset was saved in
> + * rgno_array[].
> + */
> + for (i = 0; i < CALIB_MAX; i++) {
> + rc = tasdevice_spi_dev_bulk_write(tas_priv,
> + tas_priv->cali_reg_array[i],
> + (unsigned char *)&tas_priv->cali_data[i], 4);
> + if (rc < 0)
> + dev_err(tas_priv->dev,
> + "chn %d calib %d bulk_wr err = %d\n",
> + tas_priv->index, i, rc);
> + }
> +}
> +
> +/*
> + * Update the calibration data, including speaker impedance, f0, etc,
> + * into algo. Calibrate data is done by manufacturer in the factory.
> + * These data are used by Algo for calculating the speaker temperature,
> + * speaker membrane excursion and f0 in real time during playback.
> + * Calibration data format in EFI is V2, since 2024.
> + */
> +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv)
> +{
> + /*
> + * GUID was used for data access in BIOS, it was provided by board
> + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}"
> + */
> + efi_guid_t efi_guid =
> + EFI_GUID(0x02f9af02, 0x7734, 0x4233,
> + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3);
> + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME;
> + unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf;
> + unsigned int attr, crc, offset, *tmp_val;
> + struct tm *tm = &tas_priv->tm;
> + unsigned long total_sz = 0;
> + efi_status_t status;
> +
> + tas_priv->cali_data[0] = 0;
> + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data);
> + if (status == EFI_BUFFER_TOO_SMALL) {
> + if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE)
> + return -ENOMEM;
> + /* Get variable contents into buffer */
> + status = efi.get_variable(efi_name, &efi_guid, &attr,
> + &total_sz, data);
> + }
> + if (status != EFI_SUCCESS)
> + return status;
> +
> + tmp_val = (unsigned int *)data;
> + if (tmp_val[0] == 2781) {
> + /*
> + * New features were added in calibrated Data V3:
> + * 1. Added calibration registers address define in
> + * a node, marked as Device id == 0x80.
> + * New features were added in calibrated Data V2:
> + * 1. Added some the fields to store the link_id and
> + * uniqie_id for multi-link solutions
> + * 2. Support flexible number of devices instead of
> + * fixed one in V1.
> + * Layout of calibrated data V2 in UEFI(total 256 bytes):
> + * ChipID (2781, 4 bytes)
> + * Device-Sum (4 bytes)
> + * TimeStamp of Calibration (4 bytes)
> + * for (i = 0; i < Device-Sum; i++) {
> + * Device #i index_info () {
> + * SDW link id (2bytes)
> + * SDW unique_id (2bytes)
> + * } // if Device number is 0x80, mean it's
> + * calibration registers address.
> + * Calibrated Data of Device #i (20 bytes)
> + * }
> + * CRC (4 bytes)
> + * Reserved (the rest)
> + */
> + crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0;
> +
> + if (crc != tmp_val[3 + tmp_val[1] * 6])
> + return 0;
> +
> + time64_to_tm(tmp_val[2], 0, tm);
> + for (int j = 0; j < tmp_val[1]; j++) {
> + offset = j * 6 + 3;
> + if (tmp_val[offset] == tas_priv->index) {
> + for (int i = 0; i < CALIB_MAX; i++)
> + tas_priv->cali_data[i] =
> + tmp_val[offset + i + 1];
> + } else if (tmp_val[offset] ==
> + TASDEVICE_CALIBRATION_REG_ADDRESS) {
> + for (int i = 0; i < CALIB_MAX; i++) {
> + buf = &data[(offset + i + 1) * 4];
> + tas_priv->cali_reg_array[i] =
> + TASDEVICE_REG(buf[1], buf[2],
> + buf[3]);
> + }
> + }
> + tas_priv->apply_calibration(tas_priv);
> + }
> + } else {
> + /*
> + * Calibration data is in V1 format.
> + * struct cali_data {
> + * char cali_data[20];
> + * }
> + *
> + * struct {
> + * struct cali_data cali_data[4];
> + * int TimeStamp of Calibration (4 bytes)
> + * int CRC (4 bytes)
> + * } ueft;
> + */
> + crc = crc32(~0, data, 84) ^ ~0;
> + if (crc == tmp_val[21]) {
> + time64_to_tm(tmp_val[20], 0, tm);
> + for (int i = 0; i < CALIB_MAX; i++)
> + tas_priv->cali_data[i] =
> + tmp_val[tas_priv->index * 5 + i];
> + tas_priv->apply_calibration(tas_priv);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda)
> +{
> + struct hda_codec *codec = tas_hda->priv->codec;
> +
> + snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl);
> +
> + snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl);
> +
> + for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--)
> + snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]);
> +
> + snd_ctl_remove(codec->card, tas_hda->prof_ctl);
> +}
> +
> +static void tasdev_fw_ready(const struct firmware *fmw, void *context)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev);
> + struct hda_codec *codec = tas_priv->codec;
> + int i, j, ret;
> +
> + pm_runtime_get_sync(tas_priv->dev);
> + guard(mutex)(&tas_priv->codec_lock);
> +
> + ret = tasdevice_spi_rca_parser(tas_priv, fmw);
> + if (ret)
> + goto out;
> +
> + /* Add control one time only. */
> + tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl[tas_priv->index],
> + tas_priv);
> + ret = snd_ctl_add(codec->card, tas_hda->prof_ctl);
> + if (ret) {
> + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n",
> + tas2781_prof_ctrl[tas_priv->index].name, ret);
> + goto out;
> + }
> + j = tas_priv->index * ARRAY_SIZE(tas2781_snd_controls) / 2;
> + for (i = 0; i < 3; i++) {
> + tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i+j],
> + tas_priv);
> + ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]);
> + if (ret) {
> + dev_err(tas_priv->dev,
> + "Failed to add KControl %s = %d\n",
> + tas2781_snd_controls[i+tas_priv->index*3].name,
> + ret);
> + goto out;
> + }
> + }
> +
> + tasdevice_spi_dsp_remove(tas_priv);
> +
> + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
> + scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin",
> + codec->core.subsystem_id, tas_priv->index);
> + ret = tasdevice_spi_dsp_parser(tas_priv);
> + if (ret) {
> + dev_err(tas_priv->dev, "dspfw load %s error\n",
> + tas_priv->coef_binaryname);
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + goto out;
> + }
> +
> + /* Add control one time only. */
> + tas_hda->dsp_prog_ctl =
> + snd_ctl_new1(&tas2781_dsp_prog_ctrl[tas_priv->index],
> + tas_priv);
> + ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl);
> + if (ret) {
> + dev_err(tas_priv->dev,
> + "Failed to add KControl %s = %d\n",
> + tas2781_dsp_prog_ctrl[tas_priv->index].name, ret);
> + goto out;
> + }
> +
> + tas_hda->dsp_conf_ctl =
> + snd_ctl_new1(&tas2781_dsp_conf_ctrl[tas_priv->index],
> + tas_priv);
> + ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl);
> + if (ret) {
> + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n",
> + tas2781_dsp_conf_ctrl[tas_priv->index].name, ret);
> + goto out;
> + }
> +
> + /* Perform AMP reset before firmware download. */
> + tas_priv->rcabin.profile_cfg_id = TAS2781_PRE_POST_RESET_CFG;
> + tasdevice_spi_tuning_switch(tas_priv, 0);
> + tas2781_spi_reset(tas_priv);
> + tas_priv->rcabin.profile_cfg_id = 0;
> + tasdevice_spi_tuning_switch(tas_priv, 1);
> +
> + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
> + ret = tasdevice_spi_prmg_load(tas_priv, 0);
> + if (ret < 0) {
> + dev_err(tas_priv->dev, "FW download failed = %d\n", ret);
> + goto out;
> + }
> + if (tas_priv->fmw->nr_programs > 0)
> + tas_priv->cur_prog = 0;
> + if (tas_priv->fmw->nr_configurations > 0)
> + tas_priv->cur_conf = 0;
> +
> + /*
> + * If calibrated data occurs error, dsp will still works with default
> + * calibrated data inside algo.
> + */
> + tas_priv->save_calibration(tas_priv);
> +
> +out:
> + if (fmw)
> + release_firmware(fmw);
> + pm_runtime_mark_last_busy(tas_hda->priv->dev);
> + pm_runtime_put_autosuspend(tas_hda->priv->dev);
> +}
> +
> +static int tas2781_hda_bind(struct device *dev, struct device *master,
> + void *master_data)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> + struct hda_component_parent *parent = master_data;
> + struct hda_component *comp;
> + struct hda_codec *codec;
> + int ret;
> +
> + comp = hda_component_from_index(parent, tas_hda->priv->index);
> + if (!comp)
> + return -EINVAL;
> +
> + if (comp->dev)
> + return -EBUSY;
> +
> + codec = parent->codec;
> +
> + pm_runtime_get_sync(dev);
> +
> + comp->dev = dev;
> +
> + strscpy(comp->name, dev_name(dev), sizeof(comp->name));
> +
> + ret = tascodec_spi_init(tas_hda->priv, codec, THIS_MODULE,
> + tasdev_fw_ready);
> + if (!ret)
> + comp->playback_hook = tas2781_hda_playback_hook;
> +
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> +
> + return ret;
> +}
> +
> +static void tas2781_hda_unbind(struct device *dev, struct device *master,
> + void *master_data)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> + struct hda_component_parent *parent = master_data;
> + struct hda_component *comp;
> +
> + comp = hda_component_from_index(parent, tas_hda->priv->index);
> + if (comp && (comp->dev == dev)) {
> + comp->dev = NULL;
> + memset(comp->name, 0, sizeof(comp->name));
> + comp->playback_hook = NULL;
> + }
> +
> + tas2781_hda_remove_controls(tas_hda);
> +
> + tasdevice_spi_config_info_remove(tas_hda->priv);
> + tasdevice_spi_dsp_remove(tas_hda->priv);
> +
> + tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING;
> +}
> +
> +static const struct component_ops tas2781_hda_comp_ops = {
> + .bind = tas2781_hda_bind,
> + .unbind = tas2781_hda_unbind,
> +};
> +
> +static void tas2781_hda_remove(struct device *dev)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> +
> + component_del(tas_hda->priv->dev, &tas2781_hda_comp_ops);
> +
> + pm_runtime_get_sync(tas_hda->priv->dev);
> + pm_runtime_disable(tas_hda->priv->dev);
> +
> + pm_runtime_put_noidle(tas_hda->priv->dev);
> +
> + mutex_destroy(&tas_hda->priv->codec_lock);
> +}
> +
> +static int tas2781_hda_spi_probe(struct spi_device *spi)
> +{
> + struct tasdevice_priv *tas_priv;
> + struct tas2781_hda *tas_hda;
> + const char *device_name;
> + int ret = 0;
> +
> + tas_hda = devm_kzalloc(&spi->dev, sizeof(*tas_hda), GFP_KERNEL);
> + if (!tas_hda)
> + return -ENOMEM;
> +
> + spi->max_speed_hz = TAS2781_SPI_MAX_FREQ;
> +
> + tas_priv = devm_kzalloc(&spi->dev, sizeof(*tas_priv), GFP_KERNEL);
> + if (!tas_priv)
> + goto err;
> + tas_priv->dev = &spi->dev;
> + tas_hda->priv = tas_priv;
> + tas_priv->regmap = devm_regmap_init_spi(spi, &tasdevice_regmap);
> + if (IS_ERR(tas_priv->regmap)) {
> + ret = PTR_ERR(tas_priv->regmap);
> + dev_err(tas_priv->dev, "Failed to allocate regmap: %d\n",
> + ret);
> + goto err;
> + }
> + if (strstr(dev_name(&spi->dev), "TXNW2781")) {
> + device_name = "TXNW2781";
> + tas_priv->save_calibration = tas2781_save_calibration;
> + tas_priv->apply_calibration = tas2781_apply_calib;
> + } else {
> + goto err;
> + }
> +
> + tas_priv->irq = spi->irq;
> + dev_set_drvdata(&spi->dev, tas_hda);
> + ret = tas2781_read_acpi(tas_hda, device_name,
> + spi_get_chipselect(spi, 0));
> + if (ret)
> + return dev_err_probe(tas_priv->dev, ret,
> + "Platform not supported\n");
> +
> + tasdevice_spi_init(tas_priv);
> +
> + pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000);
> + pm_runtime_use_autosuspend(tas_priv->dev);
> + pm_runtime_mark_last_busy(tas_priv->dev);
> + pm_runtime_set_active(tas_priv->dev);
> + pm_runtime_get_noresume(tas_priv->dev);
> + pm_runtime_enable(tas_priv->dev);
> +
> + pm_runtime_put_autosuspend(tas_priv->dev);
> +
> + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops);
> + if (ret) {
> + dev_err(tas_priv->dev, "Register component fail: %d\n", ret);
> + pm_runtime_disable(tas_priv->dev);
> + }
> +
> +err:
> + if (ret)
> + tas2781_hda_remove(&spi->dev);
> +
> + return ret;
> +}
> +
> +static void tas2781_hda_spi_remove(struct spi_device *spi)
> +{
> + tas2781_hda_remove(&spi->dev);
> +}
> +
> +static int tas2781_runtime_suspend(struct device *dev)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> +
> + guard(mutex)(&tas_hda->priv->codec_lock);
> +
> + tasdevice_spi_tuning_switch(tas_hda->priv, 1);
> +
> + tas_hda->priv->cur_book = -1;
> + tas_hda->priv->cur_conf = -1;
> +
> + return 0;
> +}
> +
> +static int tas2781_runtime_resume(struct device *dev)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> +
> + guard(mutex)(&tas_hda->priv->codec_lock);
> +
> + tasdevice_spi_tuning_switch(tas_hda->priv, 0);
> +
> + return 0;
> +}
> +
> +static int tas2781_system_suspend(struct device *dev)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = pm_runtime_force_suspend(dev);
> + if (ret)
> + return ret;
> +
> + /* Shutdown chip before system suspend */
> + tasdevice_spi_tuning_switch(tas_hda->priv, 1);
> + tas2781_spi_reset(tas_hda->priv);
> + /*
> + * Reset GPIO may be shared, so cannot reset here.
> + * However beyond this point, amps may be powered down.
> + */
> + return 0;
> +}
> +
> +static int tas2781_system_resume(struct device *dev)
> +{
> + struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> + int ret, val;
> +
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + return ret;
> +
> + guard(mutex)(&tas_hda->priv->codec_lock);
> + ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG,
> + &val);
> + if (ret < 0)
> + return ret;
> +
> + if (val == TAS2781_REG_CLK_CONFIG_RESET) {
> + tas_hda->priv->cur_book = -1;
> + tas_hda->priv->cur_conf = -1;
> + tas_hda->priv->cur_prog = -1;
> +
> + ret = tasdevice_spi_prmg_load(tas_hda->priv, 0);
> + if (ret < 0) {
> + dev_err(tas_hda->priv->dev,
> + "FW download failed = %d\n", ret);
> + return ret;
> + }
> +
> + if (tas_hda->priv->playback_started)
> + tasdevice_spi_tuning_switch(tas_hda->priv, 0);
> + }
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops tas2781_hda_pm_ops = {
> + RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL)
> + SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume)
> +};
> +
> +static const struct spi_device_id tas2781_hda_spi_id[] = {
> + { "tas2781-hda", },
> + {}
> +};
> +
> +static const struct acpi_device_id tas2781_acpi_hda_match[] = {
> + {"TXNW2781", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);
> +
> +static struct spi_driver tas2781_hda_spi_driver = {
> + .driver = {
> + .name = "tas2781-hda",
> + .acpi_match_table = tas2781_acpi_hda_match,
> + .pm = &tas2781_hda_pm_ops,
> + },
> + .id_table = tas2781_hda_spi_id,
> + .probe = tas2781_hda_spi_probe,
> + .remove = tas2781_hda_spi_remove,
> +};
> +module_spi_driver(tas2781_hda_spi_driver);
> +
> +MODULE_DESCRIPTION("TAS2781 HDA SPI Driver");
> +MODULE_AUTHOR("Baojun, Xu, <baojun.xug@...com>");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c
> new file mode 100644
> index 000000000000..a9673a75ab5e
> --- /dev/null
> +++ b/sound/pci/hda/tas2781_spi_fwlib.c
> @@ -0,0 +1,2006 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// TAS2781 HDA SPI driver
> +//
> +// Copyright 2024 Texas Instruments, Inc.
> +//
> +// Author: Baojun Xu <baojun.xu@...com>
> +
> +#include <linux/crc8.h>
> +#include <linux/firmware.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/unaligned.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/tas2781-dsp.h>
> +#include <sound/tlv.h>
> +
> +#include "tas2781-spi.h"
> +
> +#define OFFSET_ERROR_BIT BIT(31)
> +
> +#define ERROR_PRAM_CRCCHK 0x0000000
> +#define ERROR_YRAM_CRCCHK 0x0000001
> +#define PPC_DRIVER_CRCCHK 0x00000200
> +
> +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c)
> +#define TAS2781_YRAM_BOOK1 140
> +#define TAS2781_YRAM1_PAGE 42
> +#define TAS2781_YRAM1_START_REG 88
> +
> +#define TAS2781_YRAM2_START_PAGE 43
> +#define TAS2781_YRAM2_END_PAGE 49
> +#define TAS2781_YRAM2_START_REG 8
> +#define TAS2781_YRAM2_END_REG 127
> +
> +#define TAS2781_YRAM3_PAGE 50
> +#define TAS2781_YRAM3_START_REG 8
> +#define TAS2781_YRAM3_END_REG 27
> +
> +/* should not include B0_P53_R44-R47 */
> +#define TAS2781_YRAM_BOOK2 0
> +#define TAS2781_YRAM4_START_PAGE 50
> +#define TAS2781_YRAM4_END_PAGE 60
> +
> +#define TAS2781_YRAM5_PAGE 61
> +#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG
> +#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG
> +
> +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5
> +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64
> +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10
> +#define MAIN_ALL_DEVICES_1X 0x01
> +#define MAIN_DEVICE_A_1X 0x02
> +#define MAIN_DEVICE_B_1X 0x03
> +#define MAIN_DEVICE_C_1X 0x04
> +#define MAIN_DEVICE_D_1X 0x05
> +#define COEFF_DEVICE_A_1X 0x12
> +#define COEFF_DEVICE_B_1X 0x13
> +#define COEFF_DEVICE_C_1X 0x14
> +#define COEFF_DEVICE_D_1X 0x15
> +#define PRE_DEVICE_A_1X 0x22
> +#define PRE_DEVICE_B_1X 0x23
> +#define PRE_DEVICE_C_1X 0x24
> +#define PRE_DEVICE_D_1X 0x25
> +#define PRE_SOFTWARE_RESET_DEVICE_A 0x41
> +#define PRE_SOFTWARE_RESET_DEVICE_B 0x42
> +#define PRE_SOFTWARE_RESET_DEVICE_C 0x43
> +#define PRE_SOFTWARE_RESET_DEVICE_D 0x44
> +#define POST_SOFTWARE_RESET_DEVICE_A 0x45
> +#define POST_SOFTWARE_RESET_DEVICE_B 0x46
> +#define POST_SOFTWARE_RESET_DEVICE_C 0x47
> +#define POST_SOFTWARE_RESET_DEVICE_D 0x48
> +
> +struct tas_crc {
> + unsigned char offset;
> + unsigned char len;
> +};
> +
> +struct blktyp_devidx_map {
> + unsigned char blktyp;
> + unsigned char dev_idx;
> +};
> +
> +/* fixed m68k compiling issue: mapping table can save code field */
> +static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = {
> + { MAIN_ALL_DEVICES_1X, 0x80 },
> + { MAIN_DEVICE_A_1X, 0x81 },
> + { COEFF_DEVICE_A_1X, 0x81 },
> + { PRE_DEVICE_A_1X, 0x81 },
> + { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 },
> + { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 },
> + { MAIN_DEVICE_B_1X, 0x82 },
> + { COEFF_DEVICE_B_1X, 0x82 },
> + { PRE_DEVICE_B_1X, 0x82 },
> + { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 },
> + { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 },
> + { MAIN_DEVICE_C_1X, 0x83 },
> + { COEFF_DEVICE_C_1X, 0x83 },
> + { PRE_DEVICE_C_1X, 0x83 },
> + { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 },
> + { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 },
> + { MAIN_DEVICE_D_1X, 0x84 },
> + { COEFF_DEVICE_D_1X, 0x84 },
> + { PRE_DEVICE_D_1X, 0x84 },
> + { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 },
> + { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 },
> +};
> +
> +static const struct blktyp_devidx_map ppc3_mapping_table[] = {
> + { MAIN_ALL_DEVICES_1X, 0x80 },
> + { MAIN_DEVICE_A_1X, 0x81 },
> + { COEFF_DEVICE_A_1X, 0xC1 },
> + { PRE_DEVICE_A_1X, 0xC1 },
> + { MAIN_DEVICE_B_1X, 0x82 },
> + { COEFF_DEVICE_B_1X, 0xC2 },
> + { PRE_DEVICE_B_1X, 0xC2 },
> + { MAIN_DEVICE_C_1X, 0x83 },
> + { COEFF_DEVICE_C_1X, 0xC3 },
> + { PRE_DEVICE_C_1X, 0xC3 },
> + { MAIN_DEVICE_D_1X, 0x84 },
> + { COEFF_DEVICE_D_1X, 0xC4 },
> + { PRE_DEVICE_D_1X, 0xC4 },
> +};
> +
> +static const struct blktyp_devidx_map non_ppc3_mapping_table[] = {
> + { MAIN_ALL_DEVICES, 0x80 },
> + { MAIN_DEVICE_A, 0x81 },
> + { COEFF_DEVICE_A, 0xC1 },
> + { PRE_DEVICE_A, 0xC1 },
> + { MAIN_DEVICE_B, 0x82 },
> + { COEFF_DEVICE_B, 0xC2 },
> + { PRE_DEVICE_B, 0xC2 },
> + { MAIN_DEVICE_C, 0x83 },
> + { COEFF_DEVICE_C, 0xC3 },
> + { PRE_DEVICE_C, 0xC3 },
> + { MAIN_DEVICE_D, 0x84 },
> + { COEFF_DEVICE_D, 0xC4 },
> + { PRE_DEVICE_D, 0xC4 },
> +};
> +
> +/*
> + * Device support different configurations for different scene,
> + * like voice, music, calibration, was write in regbin file.
> + * Will be stored into tas_priv after regbin was loaded.
> + */
> +static struct tasdevice_config_info *tasdevice_add_config(
> + struct tasdevice_priv *tas_priv, unsigned char *config_data,
> + unsigned int config_size, int *status)
> +{
> + struct tasdevice_config_info *cfg_info;
> + struct tasdev_blk_data **bk_da;
> + unsigned int config_offset = 0;
> + unsigned int i;
> +
> + /*
> + * In most projects are many audio cases, such as music, handfree,
> + * receiver, games, audio-to-haptics, PMIC record, bypass mode,
> + * portrait, landscape, etc. Even in multiple audios, one or
> + * two of the chips will work for the special case, such as
> + * ultrasonic application. In order to support these variable-numbers
> + * of audio cases, flexible configs have been introduced in the
> + * DSP firmware.
> + */
> + cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL);
> + if (!cfg_info) {
> + *status = -ENOMEM;
> + return NULL;
> + }
> +
> + if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) {
> + if ((config_offset + 64) > config_size) {
> + *status = -EINVAL;
> + dev_err(tas_priv->dev, "add conf: Out of boundary\n");
> + goto config_err;
> + }
> + config_offset += 64;
> + }
> +
> + if ((config_offset + 4) > config_size) {
> + *status = -EINVAL;
> + dev_err(tas_priv->dev, "add config: Out of boundary\n");
> + goto config_err;
> + }
> +
> + /*
> + * convert data[offset], data[offset + 1], data[offset + 2] and
> + * data[offset + 3] into host
> + */
> + cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]);
> + config_offset += 4;
> +
> + /*
> + * Several kinds of dsp/algorithm firmwares can run on tas2781,
> + * the number and size of blk are not fixed and different among
> + * these firmwares.
> + */
> + bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks,
> + sizeof(*bk_da), GFP_KERNEL);
> + if (!bk_da) {
> + *status = -ENOMEM;
> + goto config_err;
> + }
> + cfg_info->real_nblocks = 0;
> + for (i = 0; i < cfg_info->nblocks; i++) {
> + if (config_offset + 12 > config_size) {
> + *status = -EINVAL;
> + dev_err(tas_priv->dev,
> + "%s: Out of boundary: i = %d nblocks = %u!\n",
> + __func__, i, cfg_info->nblocks);
> + goto block_err;
> + }
> + bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL);
> + if (!bk_da[i]) {
> + *status = -ENOMEM;
> + goto block_err;
> + }
> +
> + bk_da[i]->dev_idx = config_data[config_offset];
> + config_offset++;
> +
> + bk_da[i]->block_type = config_data[config_offset];
> + config_offset++;
> +
> + bk_da[i]->yram_checksum =
> + get_unaligned_be16(&config_data[config_offset]);
> + config_offset += 2;
> + bk_da[i]->block_size =
> + get_unaligned_be32(&config_data[config_offset]);
> + config_offset += 4;
> +
> + bk_da[i]->n_subblks =
> + get_unaligned_be32(&config_data[config_offset]);
> +
> + config_offset += 4;
> +
> + if (config_offset + bk_da[i]->block_size > config_size) {
> + *status = -EINVAL;
> + dev_err(tas_priv->dev,
> + "%s: Out of boundary: i = %d blks = %u!\n",
> + __func__, i, cfg_info->nblocks);
> + goto block_err;
> + }
> + /* instead of kzalloc+memcpy */
> + bk_da[i]->regdata = kmemdup(&config_data[config_offset],
> + bk_da[i]->block_size, GFP_KERNEL);
> + if (!bk_da[i]->regdata) {
> + *status = -ENOMEM;
> + i++;
> + goto block_err;
> + }
> +
> + config_offset += bk_da[i]->block_size;
> + cfg_info->real_nblocks += 1;
> + }
> +
> + return cfg_info;
> +block_err:
> + for (int j = 0; j < i; j++)
> + kfree(bk_da[j]);
> + kfree(bk_da);
> +config_err:
> + kfree(cfg_info);
> + return NULL;
> +}
> +
> +/* Regbin file parser function. */
> +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + struct tasdevice_config_info **cfg_info;
> + struct tasdevice_rca_hdr *fw_hdr;
> + struct tasdevice_rca *rca;
> + unsigned int total_config_sz = 0;
> + int offset = 0, ret = 0, i;
> + unsigned char *buf;
> +
> + rca = &tas_priv->rcabin;
> + fw_hdr = &rca->fw_hdr;
> + if (!fmw || !fmw->data) {
> + dev_err(tas_priv->dev, "Failed to read %s\n",
> + tas_priv->rca_binaryname);
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -EINVAL;
> + }
> + buf = (unsigned char *)fmw->data;
> + fw_hdr->img_sz = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + if (fw_hdr->img_sz != fmw->size) {
> + dev_err(tas_priv->dev,
> + "File size not match, %d %u", (int)fmw->size,
> + fw_hdr->img_sz);
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -EINVAL;
> + }
> +
> + fw_hdr->checksum = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]);
> + if (fw_hdr->binary_version_num < 0x103) {
> + dev_err(tas_priv->dev, "File version 0x%04x is too low",
> + fw_hdr->binary_version_num);
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -EINVAL;
> + }
> + offset += 4;
> + fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]);
> + offset += 8;
> + fw_hdr->plat_type = buf[offset++];
> + fw_hdr->dev_family = buf[offset++];
> + fw_hdr->reserve = buf[offset++];
> + fw_hdr->ndev = buf[offset++];
> + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) {
> + dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n");
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++)
> + fw_hdr->devs[i] = buf[offset];
> +
> + fw_hdr->nconfig = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> +
> + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) {
> + fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + total_config_sz += fw_hdr->config_size[i];
> + }
> +
> + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) {
> + dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n",
> + fw_hdr->img_sz, total_config_sz, (int)offset);
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -EINVAL;
> + }
> +
> + cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL);
> + if (!cfg_info) {
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return -ENOMEM;
> + }
> + rca->cfg_info = cfg_info;
> + rca->ncfgs = 0;
> + for (i = 0; i < (int)fw_hdr->nconfig; i++) {
> + rca->ncfgs += 1;
> + cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset],
> + fw_hdr->config_size[i], &ret);
> + if (ret) {
> + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
> + return ret;
> + }
> + offset += (int)fw_hdr->config_size[i];
> + }
> +
> + return ret;
> +}
> +
> +/* fixed m68k compiling issue: mapping table can save code field */
> +static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw,
> + struct tasdev_blk *block)
> +{
> + struct blktyp_devidx_map *p =
> + (struct blktyp_devidx_map *)non_ppc3_mapping_table;
> + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr;
> + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr;
> + int i, n = ARRAY_SIZE(non_ppc3_mapping_table);
> + unsigned char dev_idx = 0;
> +
> + if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781) {
> + p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table;
> + n = ARRAY_SIZE(ppc3_tas2781_mapping_table);
> + } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION) {
> + p = (struct blktyp_devidx_map *)ppc3_mapping_table;
> + n = ARRAY_SIZE(ppc3_mapping_table);
> + }
> +
> + for (i = 0; i < n; i++) {
> + if (block->type == p[i].blktyp) {
> + dev_idx = p[i].dev_idx;
> + break;
> + }
> + }
> +
> + return dev_idx;
> +}
> +
> +/* Block parser function. */
> +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw,
> + struct tasdev_blk *block, const struct firmware *fmw, int offset)
> +{
> + const unsigned char *data = fmw->data;
> +
> + if (offset + 16 > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> +
> + /*
> + * Convert data[offset], data[offset + 1], data[offset + 2] and
> + * data[offset + 3] into host.
> + */
> + block->type = get_unaligned_be32(&data[offset]);
> + offset += 4;
> +
> + block->is_pchksum_present = data[offset++];
> + block->pchksum = data[offset++];
> + block->is_ychksum_present = data[offset++];
> + block->ychksum = data[offset++];
> + block->blk_size = get_unaligned_be32(&data[offset]);
> + offset += 4;
> + block->nr_subblocks = get_unaligned_be32(&data[offset]);
> + offset += 4;
> +
> + /*
> + * Fixed m68k compiling issue:
> + * 1. mapping table can save code field.
> + * 2. storing the dev_idx as a member of block can reduce unnecessary
> + * time and system resource comsumption of dev_idx mapping every
> + * time the block data writing to the dsp.
> + */
> + block->dev_idx = map_dev_idx(tas_fmw, block);
> +
> + if (offset + block->blk_size > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__);
> + return -EINVAL;
> + }
> + /* instead of kzalloc+memcpy */
> + block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL);
> + if (!block->data)
> + return -ENOMEM;
> +
> + offset += block->blk_size;
> +
> + return offset;
> +}
> +
> +/* Data of block parser function. */
> +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw,
> + struct tasdevice_data *img_data, const struct firmware *fmw,
> + int offset)
> +{
> + const unsigned char *data = fmw->data;
> + struct tasdev_blk *blk;
> + unsigned int i;
> +
> + if (offset + 4 > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> + img_data->nr_blk = get_unaligned_be32(&data[offset]);
> + offset += 4;
> +
> + img_data->dev_blks = kcalloc(img_data->nr_blk,
> + sizeof(struct tasdev_blk), GFP_KERNEL);
> + if (!img_data->dev_blks)
> + return -ENOMEM;
> +
> + for (i = 0; i < img_data->nr_blk; i++) {
> + blk = &img_data->dev_blks[i];
> + offset = fw_parse_block_data_kernel(
> + tas_fmw, blk, fmw, offset);
> + if (offset < 0) {
> + kfree(img_data->dev_blks);
> + return -EINVAL;
> + }
> + }
> +
> + return offset;
> +}
> +
> +/* Data of DSP program parser function. */
> +static int fw_parse_program_data_kernel(
> + struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw,
> + const struct firmware *fmw, int offset)
> +{
> + struct tasdevice_prog *program;
> + unsigned int i;
> +
> + for (i = 0; i < tas_fmw->nr_programs; i++) {
> + program = &tas_fmw->programs[i];
> + if (offset + 72 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: mpName error\n", __func__);
> + return -EINVAL;
> + }
> + /* skip 72 unused byts */
> + offset += 72;
> +
> + offset = fw_parse_data_kernel(tas_fmw, &program->dev_data,
> + fmw, offset);
> + if (offset < 0)
> + break;
> + }
> +
> + return offset;
> +}
> +
> +/* Data of DSP configurations parser function. */
> +static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset)
> +{
> + const unsigned char *data = fmw->data;
> + struct tasdevice_config *config;
> + unsigned int i;
> +
> + for (i = 0; i < tas_fmw->nr_configurations; i++) {
> + config = &tas_fmw->configs[i];
> + if (offset + 80 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: mpName error\n", __func__);
> + return -EINVAL;
> + }
> + memcpy(config->name, &data[offset], 64);
> + /* skip extra 16 bytes */
> + offset += 80;
> +
> + offset = fw_parse_data_kernel(tas_fmw, &config->dev_data,
> + fmw, offset);
> + if (offset < 0)
> + break;
> + }
> +
> + return offset;
> +}
> +
> +/* DSP firmware file header parser function for early PPC3 firmware binary. */
> +static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv,
> + const struct firmware *fmw, int offset)
> +{
> + struct tasdevice_fw *tas_fmw = tas_priv->fmw;
> + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr;
> + struct tasdevice_config *config;
> + struct tasdevice_prog *program;
> + const unsigned char *buf = fmw->data;
> + unsigned short max_confs;
> + unsigned int i;
> +
> + if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) {
> + dev_err(tas_priv->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> + fw_hdr->device_family = get_unaligned_be16(&buf[offset]);
> + if (fw_hdr->device_family != 0) {
> + dev_err(tas_priv->dev, "%s:not TAS device\n", __func__);
> + return -EINVAL;
> + }
> + offset += 2;
> + fw_hdr->device = get_unaligned_be16(&buf[offset]);
> + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE ||
> + fw_hdr->device == 6) {
> + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device);
> + return -EINVAL;
> + }
> + offset += 2;
> +
> + tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> +
> + if (tas_fmw->nr_programs == 0 ||
> + tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) {
> + dev_err(tas_priv->dev, "mnPrograms is invalid\n");
> + return -EINVAL;
> + }
> +
> + tas_fmw->programs = kcalloc(tas_fmw->nr_programs,
> + sizeof(*tas_fmw->programs), GFP_KERNEL);
> + if (!tas_fmw->programs)
> + return -ENOMEM;
> +
> + for (i = 0; i < tas_fmw->nr_programs; i++) {
> + program = &tas_fmw->programs[i];
> + program->prog_size = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + }
> +
> + /* Skip the unused prog_size */
> + offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs);
> +
> + tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> +
> + /*
> + * The max number of config in firmware greater than 4 pieces of
> + * tas2781s is different from the one lower than 4 pieces of
> + * tas2781s.
> + */
> + max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL;
> + if (tas_fmw->nr_configurations == 0 ||
> + tas_fmw->nr_configurations > max_confs) {
> + dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__);
> + kfree(tas_fmw->programs);
> + return -EINVAL;
> + }
> +
> + if (offset + 4 * max_confs > fmw->size) {
> + dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__);
> + kfree(tas_fmw->programs);
> + return -EINVAL;
> + }
> +
> + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations,
> + sizeof(*tas_fmw->configs), GFP_KERNEL);
> + if (!tas_fmw->configs) {
> + kfree(tas_fmw->programs);
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < tas_fmw->nr_programs; i++) {
> + config = &tas_fmw->configs[i];
> + config->cfg_size = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + }
> +
> + /* Skip the unused configs */
> + offset += 4 * (max_confs - tas_fmw->nr_programs);
> +
> + return offset;
> +}
> +
> +/*
> + * In sub-block data, have three type sub-block:
> + * 1. Single byte write.
> + * 2. Multi-byte write.
> + * 3. Delay.
> + * 4. Bits update.
> + * This function perform single byte write to device.
> + */
> +static int tasdevice_single_byte_wr(void *context, int dev_idx,
> + unsigned char *data, int sublocksize)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + unsigned short len = get_unaligned_be16(&data[2]);
> + int i, subblk_offset, rc;
> +
> + subblk_offset = 4;
> + if (subblk_offset + 4 * len > sublocksize) {
> + dev_err(tas_priv->dev, "process_block: Out of boundary\n");
> + return 0;
> + }
> +
> + for (i = 0; i < len; i++) {
> + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) {
> + rc = tasdevice_spi_dev_write(tas_priv,
> + TASDEVICE_REG(data[subblk_offset],
> + data[subblk_offset + 1],
> + data[subblk_offset + 2]),
> + data[subblk_offset + 3]);
> + if (rc < 0) {
> + dev_err(tas_priv->dev,
> + "process_block: single write error\n");
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + }
> + subblk_offset += 4;
> + }
> +
> + return subblk_offset;
> +}
> +
> +/*
> + * In sub-block data, have three type sub-block:
> + * 1. Single byte write.
> + * 2. Multi-byte write.
> + * 3. Delay.
> + * 4. Bits update.
> + * This function perform multi-write to device.
> + */
> +static int tasdevice_burst_wr(void *context, int dev_idx, unsigned char *data,
> + int sublocksize)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + unsigned short len = get_unaligned_be16(&data[2]);
> + int subblk_offset, rc;
> +
> + subblk_offset = 4;
> + if (subblk_offset + 4 + len > sublocksize) {
> + dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + if (len % 4) {
> + dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n",
> + __func__, len);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> +
> + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) {
> + rc = tasdevice_spi_dev_bulk_write(tas_priv,
> + TASDEVICE_REG(data[subblk_offset],
> + data[subblk_offset + 1],
> + data[subblk_offset + 2]),
> + &data[subblk_offset + 4], len);
> + if (rc < 0) {
> + dev_err(tas_priv->dev, "%s: bulk_write error = %d\n",
> + __func__, rc);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + }
> + subblk_offset += (len + 4);
> +
> + return subblk_offset;
> +}
> +
> +/* Just delay for ms.*/
> +static int tasdevice_delay(void *context, int dev_idx, unsigned char *data,
> + int sublocksize)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + unsigned int sleep_time, subblk_offset = 2;
> +
> + if (subblk_offset + 2 > sublocksize) {
> + dev_err(tas_priv->dev, "%s: delay Out of boundary\n",
> + __func__);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) {
> + sleep_time = get_unaligned_be16(&data[2]) * 1000;
> + fsleep(sleep_time);
> + }
> + subblk_offset += 2;
> +
> + return subblk_offset;
> +}
> +
> +/*
> + * In sub-block data, have three type sub-block:
> + * 1. Single byte write.
> + * 2. Multi-byte write.
> + * 3. Delay.
> + * 4. Bits update.
> + * This function perform bits update.
> + */
> +static int tasdevice_field_wr(void *context, int dev_idx, unsigned char *data,
> + int sublocksize)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + int rc, subblk_offset = 2;
> +
> + if (subblk_offset + 6 > sublocksize) {
> + dev_err(tas_priv->dev, "%s: bit write Out of boundary\n",
> + __func__);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) {
> + rc = tasdevice_spi_dev_update_bits(tas_priv,
> + TASDEVICE_REG(data[subblk_offset + 2],
> + data[subblk_offset + 3],
> + data[subblk_offset + 4]),
> + data[subblk_offset + 1],
> + data[subblk_offset + 5]);
> + if (rc < 0) {
> + dev_err(tas_priv->dev, "%s: update_bits error = %d\n",
> + __func__, rc);
> + subblk_offset |= OFFSET_ERROR_BIT;
> + }
> + }
> + subblk_offset += 6;
> +
> + return subblk_offset;
> +}
> +
> +/* Data block process function. */
> +static int tasdevice_process_block(void *context, unsigned char *data,
> + unsigned char dev_idx, int sublocksize)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + int blktyp = dev_idx & 0xC0, subblk_offset;
> + unsigned char subblk_typ = data[1];
> +
> + switch (subblk_typ) {
> + case TASDEVICE_CMD_SING_W:
> + subblk_offset = tasdevice_single_byte_wr(tas_priv,
> + dev_idx & 0x4f, data, sublocksize);
> + break;
> + case TASDEVICE_CMD_BURST:
> + subblk_offset = tasdevice_burst_wr(tas_priv,
> + dev_idx & 0x4f, data, sublocksize);
> + break;
> + case TASDEVICE_CMD_DELAY:
> + subblk_offset = tasdevice_delay(tas_priv,
> + dev_idx & 0x4f, data, sublocksize);
> + break;
> + case TASDEVICE_CMD_FIELD_W:
> + subblk_offset = tasdevice_field_wr(tas_priv,
> + dev_idx & 0x4f, data, sublocksize);
> + break;
> + default:
> + subblk_offset = 2;
> + break;
> + }
> + if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) {
> + if (blktyp == 0x80) {
> + tas_priv->cur_prog = -1;
> + tas_priv->cur_conf = -1;
> + } else
> + tas_priv->cur_conf = -1;
> + }
> + subblk_offset &= ~OFFSET_ERROR_BIT;
> +
> + return subblk_offset;
> +}
> +
> +/*
> + * Device support different configurations for different scene,
> + * this function was used for choose different config.
> + */
> +void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no,
> + unsigned char block_type)
> +{
> + struct tasdevice_priv *tas_priv = pContext;
> + struct tasdevice_rca *rca = &tas_priv->rcabin;
> + struct tasdevice_config_info **cfg_info = rca->cfg_info;
> + struct tasdev_blk_data **blk_data;
> + unsigned int j, k;
> +
> + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) {
> + dev_err(tas_priv->dev, "conf_no should be not more than %u\n",
> + rca->ncfgs);
> + return;
> + }
> + blk_data = cfg_info[conf_no]->blk_data;
> +
> + for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) {
> + unsigned int length = 0, rc = 0;
> +
> + if (block_type > 5 || block_type < 2) {
> + dev_err(tas_priv->dev,
> + "block_type should be in range from 2 to 5\n");
> + break;
> + }
> + if (block_type != blk_data[j]->block_type)
> + continue;
> +
> + for (k = 0; k < blk_data[j]->n_subblks; k++) {
> + tas_priv->is_loading = true;
> +
> + rc = tasdevice_process_block(tas_priv,
> + blk_data[j]->regdata + length,
> + blk_data[j]->dev_idx,
> + blk_data[j]->block_size - length);
> + length += rc;
> + if (blk_data[j]->block_size < length) {
> + dev_err(tas_priv->dev,
> + "%s: %u %u out of boundary\n",
> + __func__, length,
> + blk_data[j]->block_size);
> + break;
> + }
> + }
> + if (length != blk_data[j]->block_size)
> + dev_err(tas_priv->dev, "%s: %u %u size is not same\n",
> + __func__, length, blk_data[j]->block_size);
> + }
> +}
> +
> +/* Block process function. */
> +static int tasdevice_load_block_kernel(
> + struct tasdevice_priv *tasdevice, struct tasdev_blk *block)
> +{
> + const unsigned int blk_size = block->blk_size;
> + unsigned char *data = block->data;
> + unsigned int i, length;
> +
> + for (i = 0, length = 0; i < block->nr_subblocks; i++) {
> + int rc = tasdevice_process_block(tasdevice, data + length,
> + block->dev_idx, blk_size - length);
> + if (rc < 0) {
> + dev_err(tasdevice->dev,
> + "%s: %u %u sublock write error\n",
> + __func__, length, blk_size);
> + return rc;
> + }
> + length += rc;
> + if (blk_size < length) {
> + dev_err(tasdevice->dev, "%s: %u %u out of boundary\n",
> + __func__, length, blk_size);
> + rc = -ENOMEM;
> + return rc;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* DSP firmware file header parser function. */
> +static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv,
> + struct tasdevice_dspfw_hdr *fw_hdr,
> + const struct firmware *fmw, int offset)
> +{
> + const unsigned char *buf = fmw->data;
> + int len = strlen((char *)&buf[offset]);
> +
> + len++;
> +
> + if (offset + len + 8 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> +
> + offset += len;
> +
> + fw_hdr->device_family = get_unaligned_be32(&buf[offset]);
> + if (fw_hdr->device_family != 0) {
> + dev_err(tas_priv->dev, "%s: not TAS device\n", __func__);
> + return -EINVAL;
> + }
> + offset += 4;
> +
> + fw_hdr->device = get_unaligned_be32(&buf[offset]);
> + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE ||
> + fw_hdr->device == 6) {
> + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device);
> + return -EINVAL;
> + }
> + offset += 4;
> + fw_hdr->ndev = 1;
> +
> + return offset;
> +}
> +
> +/* DSP firmware file header parser function for size variabled header. */
> +static int fw_parse_variable_header_git(struct tasdevice_priv
> + *tas_priv, const struct firmware *fmw, int offset)
> +{
> + struct tasdevice_fw *tas_fmw = tas_priv->fmw;
> + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr;
> +
> + offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset);
> +
> + return offset;
> +}
> +
> +/* DSP firmware file block parser function. */
> +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw,
> + struct tasdev_blk *block, const struct firmware *fmw, int offset)
> +{
> + unsigned char *data = (unsigned char *)fmw->data;
> + int n;
> +
> + if (offset + 8 > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: Type error\n", __func__);
> + return -EINVAL;
> + }
> + block->type = get_unaligned_be32(&data[offset]);
> + offset += 4;
> +
> + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) {
> + if (offset + 8 > fmw->size) {
> + dev_err(tas_fmw->dev, "PChkSumPresent error\n");
> + return -EINVAL;
> + }
> + block->is_pchksum_present = data[offset];
> + offset++;
> +
> + block->pchksum = data[offset];
> + offset++;
> +
> + block->is_ychksum_present = data[offset];
> + offset++;
> +
> + block->ychksum = data[offset];
> + offset++;
> + } else {
> + block->is_pchksum_present = 0;
> + block->is_ychksum_present = 0;
> + }
> +
> + block->nr_cmds = get_unaligned_be32(&data[offset]);
> + offset += 4;
> +
> + n = block->nr_cmds * 4;
> + if (offset + n > fmw->size) {
> + dev_err(tas_fmw->dev,
> + "%s: File Size(%lu) error offset = %d n = %d\n",
> + __func__, (unsigned long)fmw->size, offset, n);
> + return -EINVAL;
> + }
> + /* instead of kzalloc+memcpy */
> + block->data = kmemdup(&data[offset], n, GFP_KERNEL);
> + if (!block->data)
> + return -ENOMEM;
> +
> + offset += n;
> +
> + return offset;
> +}
> +
> +/*
> + * When parsing error occurs, all the memory resource will be released
> + * in the end of tasdevice_rca_ready.
> + */
> +static int fw_parse_data(struct tasdevice_fw *tas_fmw,
> + struct tasdevice_data *img_data, const struct firmware *fmw,
> + int offset)
> +{
> + const unsigned char *data = (unsigned char *)fmw->data;
> + struct tasdev_blk *blk;
> + unsigned int i, n;
> +
> + if (offset + 64 > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: Name error\n", __func__);
> + return -EINVAL;
> + }
> + memcpy(img_data->name, &data[offset], 64);
> + offset += 64;
> +
> + n = strlen((char *)&data[offset]);
> + n++;
> + if (offset + n + 2 > fmw->size) {
> + dev_err(tas_fmw->dev, "%s: Description error\n", __func__);
> + return -EINVAL;
> + }
> + offset += n;
> + img_data->nr_blk = get_unaligned_be16(&data[offset]);
> + offset += 2;
> +
> + img_data->dev_blks = kcalloc(img_data->nr_blk,
> + sizeof(*img_data->dev_blks), GFP_KERNEL);
> + if (!img_data->dev_blks)
> + return -ENOMEM;
> +
> + for (i = 0; i < img_data->nr_blk; i++) {
> + blk = &img_data->dev_blks[i];
> + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset);
> + if (offset < 0)
> + return -EINVAL;
> + }
> +
> + return offset;
> +}
> +
> +/*
> + * When parsing error occurs, all the memory resource will be released
> + * in the end of tasdevice_rca_ready.
> + */
> +static int fw_parse_program_data(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset)
> +{
> + unsigned char *buf = (unsigned char *)fmw->data;
> + struct tasdevice_prog *program;
> + int i;
> +
> + if (offset + 2 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> + tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]);
> + offset += 2;
> +
> + if (tas_fmw->nr_programs == 0) {
> + /* Not error in calibration Data file, return directly */
> + dev_dbg(tas_priv->dev, "%s: No Programs data, maybe calbin\n",
> + __func__);
> + return offset;
> + }
> +
> + tas_fmw->programs =
> + kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs),
> + GFP_KERNEL);
> + if (!tas_fmw->programs)
> + return -ENOMEM;
> +
> + for (i = 0; i < tas_fmw->nr_programs; i++) {
> + int n = 0;
> +
> + program = &tas_fmw->programs[i];
> + if (offset + 64 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: mpName error\n", __func__);
> + return -EINVAL;
> + }
> + offset += 64;
> +
> + n = strlen((char *)&buf[offset]);
> + /* skip '\0' and 5 unused bytes */
> + n += 6;
> + if (offset + n > fmw->size) {
> + dev_err(tas_priv->dev, "Description err\n");
> + return -EINVAL;
> + }
> +
> + offset += n;
> +
> + offset = fw_parse_data(tas_fmw, &program->dev_data, fmw,
> + offset);
> + if (offset < 0)
> + return offset;
> + }
> +
> + return offset;
> +}
> +
> +/*
> + * When parsing error occurs, all the memory resource will be released
> + * in the end of tasdevice_rca_ready.
> + */
> +static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset)
> +{
> + unsigned char *data = (unsigned char *)fmw->data;
> + struct tasdevice_config *config;
> + unsigned int i, n;
> +
> + if (offset + 2 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: File Size error\n", __func__);
> + return -EINVAL;
> + }
> + tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]);
> + offset += 2;
> +
> + if (tas_fmw->nr_configurations == 0) {
> + dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__);
> + /* Not error for calibration Data file, return directly */
> + return offset;
> + }
> + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations,
> + sizeof(*tas_fmw->configs), GFP_KERNEL);
> + if (!tas_fmw->configs)
> + return -ENOMEM;
> + for (i = 0; i < tas_fmw->nr_configurations; i++) {
> + config = &tas_fmw->configs[i];
> + if (offset + 64 > fmw->size) {
> + dev_err(tas_priv->dev, "File Size err\n");
> + return -EINVAL;
> + }
> + memcpy(config->name, &data[offset], 64);
> + offset += 64;
> +
> + n = strlen((char *)&data[offset]);
> + n += 15;
> + if (offset + n > fmw->size) {
> + dev_err(tas_priv->dev, "Description err\n");
> + return -EINVAL;
> + }
> + offset += n;
> + offset = fw_parse_data(tas_fmw, &config->dev_data,
> + fmw, offset);
> + if (offset < 0)
> + break;
> + }
> +
> + return offset;
> +}
> +
> +/* yram5 page check. */
> +static bool check_inpage_yram_rg(struct tas_crc *cd,
> + unsigned char reg, unsigned char len)
> +{
> + bool in = false;
> +
> + if (reg <= TAS2781_YRAM5_END_REG &&
> + reg >= TAS2781_YRAM5_START_REG) {
> + if (reg + len > TAS2781_YRAM5_END_REG)
> + cd->len = TAS2781_YRAM5_END_REG - reg + 1;
> + else
> + cd->len = len;
> + cd->offset = reg;
> + in = true;
> + } else if (reg < TAS2781_YRAM5_START_REG) {
> + if (reg + len > TAS2781_YRAM5_START_REG) {
> + cd->offset = TAS2781_YRAM5_START_REG;
> + cd->len = len - TAS2781_YRAM5_START_REG + reg;
> + in = true;
> + }
> + }
> +
> + return in;
> +}
> +
> +/* DSP firmware yram block check. */
> +static bool check_inpage_yram_bk1(struct tas_crc *cd,
> + unsigned char page, unsigned char reg, unsigned char len)
> +{
> + bool in = false;
> +
> + if (page == TAS2781_YRAM1_PAGE) {
> + if (reg >= TAS2781_YRAM1_START_REG) {
> + cd->offset = reg;
> + cd->len = len;
> + in = true;
> + } else if (reg + len > TAS2781_YRAM1_START_REG) {
> + cd->offset = TAS2781_YRAM1_START_REG;
> + cd->len = len - TAS2781_YRAM1_START_REG + reg;
> + in = true;
> + }
> + } else if (page == TAS2781_YRAM3_PAGE) {
> + in = check_inpage_yram_rg(cd, reg, len);
> + }
> +
> + return in;
> +}
> +
> +/*
> + * Return Code:
> + * true -- the registers are in the inpage yram
> + * false -- the registers are NOT in the inpage yram
> + */
> +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book,
> + unsigned char page, unsigned char reg, unsigned char len)
> +{
> + bool in = false;
> +
> + if (book == TAS2781_YRAM_BOOK1)
> + in = check_inpage_yram_bk1(cd, page, reg, len);
> + else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE)
> + in = check_inpage_yram_rg(cd, reg, len);
> +
> + return in;
> +}
> +
> +/* yram4 page check. */
> +static bool check_inblock_yram_bk(struct tas_crc *cd,
> + unsigned char page, unsigned char reg, unsigned char len)
> +{
> + bool in = false;
> +
> + if ((page >= TAS2781_YRAM4_START_PAGE &&
> + page <= TAS2781_YRAM4_END_PAGE) ||
> + (page >= TAS2781_YRAM2_START_PAGE &&
> + page <= TAS2781_YRAM2_END_PAGE)) {
> + if (reg <= TAS2781_YRAM2_END_REG &&
> + reg >= TAS2781_YRAM2_START_REG) {
> + cd->offset = reg;
> + cd->len = len;
> + in = true;
> + } else if (reg < TAS2781_YRAM2_START_REG) {
> + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) {
> + cd->offset = TAS2781_YRAM2_START_REG;
> + cd->len = reg + len - TAS2781_YRAM2_START_REG;
> + in = true;
> + }
> + }
> + }
> +
> + return in;
> +}
> +
> +/*
> + * Return Code:
> + * true -- the registers are in the inblock yram
> + * false -- the registers are NOT in the inblock yram
> + */
> +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book,
> + unsigned char page, unsigned char reg, unsigned char len)
> +{
> + bool in = false;
> +
> + if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2)
> + in = check_inblock_yram_bk(cd, page, reg, len);
> +
> + return in;
> +}
> +
> +/* yram page check. */
> +static bool check_yram(struct tas_crc *cd, unsigned char book,
> + unsigned char page, unsigned char reg, unsigned char len)
> +{
> + bool in;
> +
> + in = check_inpage_yram(cd, book, page, reg, len);
> + if (!in)
> + in = check_inblock_yram(cd, book, page, reg, len);
> +
> + return in;
> +}
> +
> +/* Checksum for data block. */
> +static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice,
> + unsigned char book, unsigned char page,
> + unsigned char reg, unsigned int len)
> +{
> + struct tas_crc crc_data;
> + unsigned char crc_chksum = 0;
> + unsigned char nBuf1[128];
> + int ret = 0, i;
> + bool in;
> +
> + if ((reg + len - 1) > 127) {
> + ret = -EINVAL;
> + dev_err(tasdevice->dev, "firmware error\n");
> + goto end;
> + }
> +
> + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (len == 4)) {
> + /* DSP swap command, pass */
> + ret = 0;
> + goto end;
> + }
> +
> + in = check_yram(&crc_data, book, page, reg, len);
> + if (!in)
> + goto end;
> +
> + if (len == 1) {
> + dev_err(tasdevice->dev, "firmware error\n");
> + ret = -EINVAL;
> + goto end;
> + }
> +
> + ret = tasdevice_spi_dev_bulk_read(tasdevice,
> + TASDEVICE_REG(book, page, crc_data.offset),
> + nBuf1, crc_data.len);
> + if (ret < 0)
> + goto end;
> +
> + for (i = 0; i < crc_data.len; i++) {
> + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + ((i + crc_data.offset) >=
> + TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + ((i + crc_data.offset) <=
> + (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4)))
> + /* DSP swap command, bypass */
> + continue;
> + else
> + crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i],
> + 1, 0);
> + }
> +
> + ret = crc_chksum;
> +
> +end:
> + return ret;
> +}
> +
> +/* Checksum for single register. */
> +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice,
> + unsigned char book, unsigned char page,
> + unsigned char reg, unsigned char val)
> +{
> + struct tas_crc crc_data;
> + unsigned int nData1;
> + int ret = 0;
> + bool in;
> +
> + /* DSP swap command, pass */
> + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) &&
> + (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4)))
> + return 0;
> +
> + in = check_yram(&crc_data, book, page, reg, 1);
> + if (!in)
> + return 0;
> + ret = tasdevice_spi_dev_read(tasdevice,
> + TASDEVICE_REG(book, page, reg), &nData1);
> + if (ret < 0)
> + return ret;
> +
> + if (nData1 != val) {
> + dev_err(tasdevice->dev,
> + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n",
> + book, page, reg, val, nData1);
> + tasdevice->err_code |= ERROR_YRAM_CRCCHK;
> + return -EAGAIN;
> + }
> +
> + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0);
> +
> + return ret;
> +}
> +
> +/* Block type check. */
> +static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p)
> +{
> + if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) ||
> + (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) ||
> + (type == MAIN_DEVICE_D))
> + p->cur_prog = -1;
> + else
> + p->cur_conf = -1;
> +}
> +
> +/* Checksum for data bytes. */
> +static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block, unsigned char book,
> + unsigned char page, unsigned char reg, unsigned int len,
> + unsigned char val, unsigned char *crc_chksum)
> +{
> + int ret;
> +
> + if (len > 1)
> + ret = tasdev_multibytes_chksum(tas_priv, book, page, reg,
> + len);
> + else
> + ret = do_singlereg_checksum(tas_priv, book, page, reg, val);
> +
> + if (ret > 0) {
> + *crc_chksum += ret;
> + goto end;
> + }
> +
> + if (ret != -EAGAIN)
> + goto end;
> +
> + block->nr_retry--;
> + if (block->nr_retry > 0)
> + goto end;
> +
> + set_err_prg_cfg(block->type, tas_priv);
> +
> +end:
> + return ret;
> +}
> +
> +/* Multi-data byte write. */
> +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block, unsigned char book,
> + unsigned char page, unsigned char reg, unsigned char *data,
> + unsigned int len, unsigned int *nr_cmds,
> + unsigned char *crc_chksum)
> +{
> + int ret;
> +
> + if (len > 1) {
> + ret = tasdevice_spi_dev_bulk_write(tas_priv,
> + TASDEVICE_REG(book, page, reg), data + 3, len);
> + if (ret < 0)
> + return ret;
> + if (block->is_ychksum_present)
> + ret = tasdev_bytes_chksum(tas_priv, block,
> + book, page, reg, len, 0, crc_chksum);
> + } else {
> + ret = tasdevice_spi_dev_write(tas_priv,
> + TASDEVICE_REG(book, page, reg), data[3]);
> + if (ret < 0)
> + return ret;
> + if (block->is_ychksum_present)
> + ret = tasdev_bytes_chksum(tas_priv, block, book,
> + page, reg, 1, data[3], crc_chksum);
> + }
> +
> + if (!block->is_ychksum_present || ret >= 0) {
> + *nr_cmds += 1;
> + if (len >= 2)
> + *nr_cmds += ((len - 2) / 4) + 1;
> + }
> +
> + return ret;
> +}
> +
> +/* Checksum for block. */
> +static int tasdev_block_chksum(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block)
> +{
> + unsigned int nr_value;
> + int ret;
> +
> + ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value);
> + if (ret < 0) {
> + dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret);
> + set_err_prg_cfg(block->type, tas_priv);
> + return ret;
> + }
> +
> + if ((nr_value & 0xff) != block->pchksum) {
> + dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret);
> + dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n",
> + block->pchksum, (nr_value & 0xff));
> + tas_priv->err_code |= ERROR_PRAM_CRCCHK;
> + ret = -EAGAIN;
> + block->nr_retry--;
> +
> + if (block->nr_retry <= 0)
> + set_err_prg_cfg(block->type, tas_priv);
> + } else {
> + tas_priv->err_code &= ~ERROR_PRAM_CRCCHK;
> + }
> +
> + return ret;
> +}
> +
> +/* Firmware block load function. */
> +static int tasdev_load_blk(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block)
> +{
> + unsigned int sleep_time, len, nr_cmds;
> + unsigned char offset, book, page, val;
> + unsigned char *data = block->data;
> + unsigned char crc_chksum = 0;
> + int ret = 0;
> +
> + while (block->nr_retry > 0) {
> + if (block->is_pchksum_present) {
> + ret = tasdevice_spi_dev_write(tas_priv,
> + TASDEVICE_CHECKSUM, 0);
> + if (ret < 0)
> + break;
> + }
> +
> + if (block->is_ychksum_present)
> + crc_chksum = 0;
> +
> + nr_cmds = 0;
> +
> + while (nr_cmds < block->nr_cmds) {
> + data = block->data + nr_cmds * 4;
> +
> + book = data[0];
> + page = data[1];
> + offset = data[2];
> + val = data[3];
> +
> + nr_cmds++;
> + /* Single byte write */
> + if (offset <= 0x7F) {
> + ret = tasdevice_spi_dev_write(tas_priv,
> + TASDEVICE_REG(book, page, offset),
> + val);
> + if (ret < 0)
> + break;
> + if (block->is_ychksum_present) {
> + ret = tasdev_bytes_chksum(tas_priv,
> + block, book, page, offset,
> + 1, val, &crc_chksum);
> + if (ret < 0)
> + break;
> + }
> + continue;
> + }
> + /* sleep command */
> + if (offset == 0x81) {
> + /* book -- data[0] page -- data[1] */
> + sleep_time = ((book << 8) + page)*1000;
> + fsleep(sleep_time);
> + continue;
> + }
> + /* Multiple bytes write */
> + if (offset == 0x85) {
> + data += 4;
> + len = (book << 8) + page;
> + book = data[0];
> + page = data[1];
> + offset = data[2];
> + ret = tasdev_multibytes_wr(tas_priv,
> + block, book, page, offset, data,
> + len, &nr_cmds, &crc_chksum);
> + if (ret < 0)
> + break;
> + }
> + }
> + if (ret == -EAGAIN) {
> + if (block->nr_retry > 0)
> + continue;
> + } else if (ret < 0) {
> + /* err in current device, skip it */
> + break;
> + }
> +
> + if (block->is_pchksum_present) {
> + ret = tasdev_block_chksum(tas_priv, block);
> + if (ret == -EAGAIN) {
> + if (block->nr_retry > 0)
> + continue;
> + } else if (ret < 0) {
> + /* err in current device, skip it */
> + break;
> + }
> + }
> +
> + if (block->is_ychksum_present) {
> + /* TBD, open it when FW ready */
> + dev_err(tas_priv->dev,
> + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n",
> + block->ychksum, crc_chksum);
> +
> + tas_priv->err_code &=
> + ~ERROR_YRAM_CRCCHK;
> + ret = 0;
> + }
> + /* skip current blk */
> + break;
> + }
> +
> + return ret;
> +}
> +
> +/* Firmware block load function. */
> +static int tasdevice_load_block(struct tasdevice_priv *tas_priv,
> + struct tasdev_blk *block)
> +{
> + int ret = 0;
> +
> + block->nr_retry = 6;
> + if (tas_priv->is_loading == false)
> + return 0;
> + ret = tasdev_load_blk(tas_priv, block);
> + if (ret < 0)
> + dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type);
> +
> + return ret;
> +}
> +
> +/*
> + * Select firmware binary parser & load callback functions by ppc3 version
> + * and firmware binary version.
> + */
> +static int dspfw_default_callback(struct tasdevice_priv *tas_priv,
> + unsigned int drv_ver, unsigned int ppcver)
> +{
> + int rc = 0;
> +
> + if (drv_ver == 0x100) {
> + if (ppcver >= PPC3_VERSION) {
> + tas_priv->fw_parse_variable_header =
> + fw_parse_variable_header_kernel;
> + tas_priv->fw_parse_program_data =
> + fw_parse_program_data_kernel;
> + tas_priv->fw_parse_configuration_data =
> + fw_parse_configuration_data_kernel;
> + tas_priv->tasdevice_load_block =
> + tasdevice_load_block_kernel;
> + } else if (ppcver == 0x00) {
> + tas_priv->fw_parse_variable_header =
> + fw_parse_variable_header_git;
> + tas_priv->fw_parse_program_data =
> + fw_parse_program_data;
> + tas_priv->fw_parse_configuration_data =
> + fw_parse_configuration_data;
> + tas_priv->tasdevice_load_block =
> + tasdevice_load_block;
> + } else {
> + dev_err(tas_priv->dev,
> + "Wrong PPCVer :0x%08x\n", ppcver);
> + rc = -EINVAL;
> + }
> + } else {
> + dev_err(tas_priv->dev, "Wrong DrvVer : 0x%02x\n", drv_ver);
> + rc = -EINVAL;
> + }
> +
> + return rc;
> +}
> +
> +/* DSP firmware binary file header parser function. */
> +static int fw_parse_header(struct tasdevice_priv *tas_priv,
> + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset)
> +{
> + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr;
> + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr;
> + static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, };
> + const unsigned char *buf = (unsigned char *)fmw->data;
> +
> + if (offset + 92 > fmw->size) {
> + dev_err(tas_priv->dev, "%s: File Size error\n", __func__);
> + offset = -EINVAL;
> + goto out;
> + }
> + if (memcmp(&buf[offset], magic_number, 4)) {
> + dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__);
> + offset = -EINVAL;
> + goto out;
> + }
> + offset += 4;
> +
> + /*
> + * Convert data[offset], data[offset + 1], data[offset + 2] and
> + * data[offset + 3] into host
> + */
> + fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]);
> + offset += 4;
> + if (fw_fixed_hdr->fwsize != fmw->size) {
> + dev_err(tas_priv->dev, "File size not match, %lu %u",
> + (unsigned long)fmw->size, fw_fixed_hdr->fwsize);
> + offset = -EINVAL;
> + goto out;
> + }
> + offset += 4;
> + fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]);
> + offset += 8;
> + fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]);
> + offset += 72;
> +
> +out:
> + return offset;
> +}
> +
> +/* DSP firmware binary file parser function. */
> +static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr;
> + struct tasdevice_fw *tas_fmw;
> + int offset = 0, ret = 0;
> +
> + if (!fmw || !fmw->data) {
> + dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n",
> + __func__, tas_priv->coef_binaryname);
> + return -EINVAL;
> + }
> +
> + tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL);
> + if (!tas_priv->fmw)
> + return -ENOMEM;
> + tas_fmw = tas_priv->fmw;
> + tas_fmw->dev = tas_priv->dev;
> + offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset);
> +
> + if (offset == -EINVAL)
> + return -EINVAL;
> +
> + fw_fixed_hdr = &tas_fmw->fw_hdr.fixed_hdr;
> + /* Support different versions of firmware */
> + switch (fw_fixed_hdr->drv_ver) {
> + case 0x301:
> + case 0x302:
> + case 0x502:
> + case 0x503:
> + tas_priv->fw_parse_variable_header =
> + fw_parse_variable_header_kernel;
> + tas_priv->fw_parse_program_data =
> + fw_parse_program_data_kernel;
> + tas_priv->fw_parse_configuration_data =
> + fw_parse_configuration_data_kernel;
> + tas_priv->tasdevice_load_block =
> + tasdevice_load_block_kernel;
> + break;
> + case 0x202:
> + case 0x400:
> + tas_priv->fw_parse_variable_header =
> + fw_parse_variable_header_git;
> + tas_priv->fw_parse_program_data =
> + fw_parse_program_data;
> + tas_priv->fw_parse_configuration_data =
> + fw_parse_configuration_data;
> + tas_priv->tasdevice_load_block =
> + tasdevice_load_block;
> + break;
> + default:
> + ret = dspfw_default_callback(tas_priv,
> + fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver);
> + if (ret)
> + return ret;
> + break;
> + }
> +
> + offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset);
> + if (offset < 0)
> + return offset;
> +
> + offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw,
> + offset);
> + if (offset < 0)
> + return offset;
> +
> + offset = tas_priv->fw_parse_configuration_data(tas_priv,
> + tas_fmw, fmw, offset);
> + if (offset < 0)
> + ret = offset;
> +
> + return ret;
> +}
> +
> +/* DSP firmware binary file parser function. */
> +int tasdevice_spi_dsp_parser(void *context)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + const struct firmware *fw_entry;
> + int ret;
> +
> + ret = request_firmware(&fw_entry, tas_priv->coef_binaryname,
> + tas_priv->dev);
> + if (ret) {
> + dev_err(tas_priv->dev, "%s: load %s error\n", __func__,
> + tas_priv->coef_binaryname);
> + return ret;
> + }
> +
> + ret = tasdevice_dspfw_ready(fw_entry, tas_priv);
> + release_firmware(fw_entry);
> + fw_entry = NULL;
> +
> + return ret;
> +}
> +
> +/* DSP firmware program block data remove function. */
> +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog)
> +{
> + struct tasdevice_data *tas_dt;
> + struct tasdev_blk *blk;
> + unsigned int i;
> +
> + if (!prog)
> + return;
> +
> + tas_dt = &prog->dev_data;
> +
> + if (!tas_dt->dev_blks)
> + return;
> +
> + for (i = 0; i < tas_dt->nr_blk; i++) {
> + blk = &tas_dt->dev_blks[i];
> + kfree(blk->data);
> + }
> + kfree(tas_dt->dev_blks);
> +}
> +
> +/* DSP firmware program block data remove function. */
> +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog,
> + unsigned short nr)
> +{
> + int i;
> +
> + for (i = 0; i < nr; i++)
> + tasdev_dsp_prog_blk_remove(&prog[i]);
> + kfree(prog);
> +}
> +
> +/* DSP firmware config block data remove function. */
> +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg)
> +{
> + struct tasdevice_data *tas_dt;
> + struct tasdev_blk *blk;
> + unsigned int i;
> +
> + if (cfg) {
> + tas_dt = &cfg->dev_data;
> +
> + if (!tas_dt->dev_blks)
> + return;
> +
> + for (i = 0; i < tas_dt->nr_blk; i++) {
> + blk = &tas_dt->dev_blks[i];
> + kfree(blk->data);
> + }
> + kfree(tas_dt->dev_blks);
> + }
> +}
> +
> +/* DSP firmware config remove function. */
> +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config,
> + unsigned short nr)
> +{
> + int i;
> +
> + for (i = 0; i < nr; i++)
> + tasdev_dsp_cfg_blk_remove(&config[i]);
> + kfree(config);
> +}
> +
> +/* DSP firmware remove function. */
> +void tasdevice_spi_dsp_remove(void *context)
> +{
> + struct tasdevice_priv *tas_dev = context;
> +
> + if (!tas_dev->fmw)
> + return;
> +
> + if (tas_dev->fmw->programs)
> + tasdev_dsp_prog_remove(tas_dev->fmw->programs,
> + tas_dev->fmw->nr_programs);
> + if (tas_dev->fmw->configs)
> + tasdev_dsp_cfg_remove(tas_dev->fmw->configs,
> + tas_dev->fmw->nr_configurations);
> + kfree(tas_dev->fmw);
> + tas_dev->fmw = NULL;
> +}
> +
> +/* DSP firmware calibration data remove function. */
> +static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw)
> +{
> + struct tasdevice_calibration *calibration;
> + struct tasdev_blk *block;
> + unsigned int blks;
> + int i;
> +
> + if (!tas_fmw->calibrations)
> + goto out;
> +
> + for (i = 0; i < tas_fmw->nr_calibrations; i++) {
> + calibration = &tas_fmw->calibrations[i];
> + if (!calibration)
> + continue;
> +
> + if (!calibration->dev_data.dev_blks)
> + continue;
> +
> + for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) {
> + block = &calibration->dev_data.dev_blks[blks];
> + if (!block)
> + continue;
> + kfree(block->data);
> + }
> + kfree(calibration->dev_data.dev_blks);
> + }
> + kfree(tas_fmw->calibrations);
> +out:
> + kfree(tas_fmw);
> +}
> +
> +/* Calibration data from firmware remove function. */
> +void tasdevice_spi_calbin_remove(void *context)
> +{
> + struct tasdevice_priv *tas_priv = context;
> +
> + if (tas_priv->cali_data_fmw) {
> + tas2781_clear_calfirmware(tas_priv->cali_data_fmw);
> + tas_priv->cali_data_fmw = NULL;
> + }
> +}
> +
> +/* Configuration remove function. */
> +void tasdevice_spi_config_info_remove(void *context)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + struct tasdevice_rca *rca = &tas_priv->rcabin;
> + struct tasdevice_config_info **ci = rca->cfg_info;
> + unsigned int i, j;
> +
> + if (!ci)
> + return;
> + for (i = 0; i < rca->ncfgs; i++) {
> + if (!ci[i])
> + continue;
> + if (ci[i]->blk_data) {
> + for (j = 0; j < ci[i]->real_nblocks; j++) {
> + if (!ci[i]->blk_data[j])
> + continue;
> + kfree(ci[i]->blk_data[j]->regdata);
> + kfree(ci[i]->blk_data[j]);
> + }
> + kfree(ci[i]->blk_data);
> + }
> + kfree(ci[i]);
> + }
> + kfree(ci);
> +}
> +
> +/* DSP firmware program block data load function. */
> +static int tasdevice_load_data(struct tasdevice_priv *tas_priv,
> + struct tasdevice_data *dev_data)
> +{
> + struct tasdev_blk *block;
> + unsigned int i;
> + int ret = 0;
> +
> + for (i = 0; i < dev_data->nr_blk; i++) {
> + block = &dev_data->dev_blks[i];
> + ret = tas_priv->tasdevice_load_block(tas_priv, block);
> + if (ret < 0)
> + break;
> + }
> +
> + return ret;
> +}
> +
> +/* DSP firmware program load interface function. */
> +int tasdevice_spi_prmg_load(void *context, int prm_no)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + struct tasdevice_fw *tas_fmw = tas_priv->fmw;
> + struct tasdevice_prog *program;
> + struct tasdevice_config *conf;
> + int ret = 0;
> +
> + if (!tas_fmw) {
> + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__);
> + return -EINVAL;
> + }
> + if (prm_no >= 0 && prm_no <= tas_fmw->nr_programs) {
> + tas_priv->cur_conf = 0;
> + tas_priv->is_loading = true;
> + program = &tas_fmw->programs[prm_no];
> + ret = tasdevice_load_data(tas_priv, &program->dev_data);
> + if (ret < 0) {
> + dev_err(tas_priv->dev, "Program failed %d.\n", ret);
> + return ret;
> + }
> + tas_priv->cur_prog = prm_no;
> +
> + conf = &tas_fmw->configs[tas_priv->cur_conf];
> + ret = tasdevice_load_data(tas_priv, &conf->dev_data);
> + if (ret < 0)
> + dev_err(tas_priv->dev, "Config failed %d.\n", ret);
> + } else {
> + dev_err(tas_priv->dev,
> + "%s: prm(%d) is not in range of Programs %u\n",
> + __func__, prm_no, tas_fmw->nr_programs);
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +/* RCABIN configuration switch interface function. */
> +void tasdevice_spi_tuning_switch(void *context, int state)
> +{
> + struct tasdevice_priv *tas_priv = context;
> + int profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
> +
> + if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) {
> + dev_err(tas_priv->dev, "DSP bin file not loaded\n");
> + return;
> + }
> +
> + if (state == 0)
> + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id,
> + TASDEVICE_BIN_BLK_PRE_POWER_UP);
> + else
> + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id,
> + TASDEVICE_BIN_BLK_PRE_SHUTDOWN);
> +}
> --
> 2.43.0
>
Powered by blists - more mailing lists