linux-kernel - [PATCH v2] usb: host: xhci-plat: Assign shared_hcd->rsrc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <7ECE325975663D2D+20250104155111.100597-1-wangyuli@uniontech.com>
Date: Sat,  4 Jan 2025 23:51:11 +0800
From: WangYuli <wangyuli@...ontech.com>
To: mathias.nyman@...el.com,
	gregkh@...uxfoundation.org
Cc: linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	niklas.neronin@...ux.intel.com,
	quic_wcheng@...cinc.com,
	andriy.shevchenko@...ux.intel.com,
	michal.pecio@...il.com,
	guanwentao@...ontech.com,
	zhanjun@...ontech.com,
	bigeasy@...utronix.de,
	balbi@...com,
	sarah.a.sharp@...ux.intel.com,
	hkallweit1@...il.com,
	WangYuli <wangyuli@...ontech.com>,
	Xu Rao <raoxu@...ontech.com>
Subject: [PATCH v2] usb: host: xhci-plat: Assign shared_hcd->rsrc_start

When inserting a USB device, examining hcd->rsrc_start can be
helpful in identifying which hcd is mounted, as the physical
address represented here is typically unique.

The following code snippet demonstrates this:
  struct usb_hcd *hcd = bus_to_hcd(udev->bus);
  unsigned long long usb_hcd_addr = (unsigned long long)hcd->rsrc_start;

However, this approach has limitations now. For USB hosts with an
MMIO interface, the effectiveness of this method is restricted to
USB 2.0.

Becase commit 3429e91a661e ("usb: host: xhci: add platform driver
support") assigned res->start to hcd->rsrc_start. But
shared_hcd->rsrc_start remains unassigned, which is also necessary
in certain scenarios.

Co-developed-by: Xu Rao <raoxu@...ontech.com>
Signed-off-by: Xu Rao <raoxu@...ontech.com>
Signed-off-by: WangYuli <wangyuli@...ontech.com>
--
Changlog:
  v1 -> v2: Move code changes for commit e0fe986972f5 ("usb: host:
xhci-plat: prepare operation w/o shared hcd").
---
 drivers/usb/host/xhci-plat.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index e6c9006bd568..457e839b9b53 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -329,6 +329,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s
 		usb3_hcd->can_do_streams = 1;
 
 	if (xhci->shared_hcd) {
+		xhci->shared_hcd->rsrc_start = hcd->rsrc_start;
+		xhci->shared_hcd->rsrc_len = hcd->rsrc_len;
 		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 		if (ret)
 			goto put_usb3_hcd;
-- 
2.45.2