linux-kernel - [PATCH v3 2/4] dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250105160346.418829-3-ivo.ivanov.ivanov1@gmail.com>
Date: Sun,  5 Jan 2025 18:03:44 +0200
From: Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Alim Akhtar <alim.akhtar@...sung.com>,
	Sam Protsenko <semen.protsenko@...aro.org>,
	Peter Griffin <peter.griffin@...aro.org>
Cc: devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 2/4] dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi

Add new constants for choosing the additional USIv1 configuration modes
in device tree. Those are further used in the USI driver to figure out
which value to write into SW_CONF register. Modify the current USI IP-core
bindings to include information about USIv1 and a compatible for
exynos8895.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
---
 .../bindings/soc/samsung/exynos-usi.yaml      | 107 ++++++++++++------
 include/dt-bindings/soc/samsung,exynos-usi.h  |   3 +
 2 files changed, 74 insertions(+), 36 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index cc92a06a3..d6c39c3e3 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -11,11 +11,21 @@ maintainers:
   - Krzysztof Kozlowski <krzk@...nel.org>
 
 description: |
-  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
-  USI shares almost all internal circuits within each protocol, so only one
-  protocol can be chosen at a time. USI is modeled as a node with zero or more
-  child nodes, each representing a serial sub-node device. The mode setting
-  selects which particular function will be used.
+  The USI IP-core provides configurable support for serial protocols, enabling
+  different serial communication modes depending on the version.
+
+  In USIv1, configurations are available to enable either one or two protocols
+  simultaneously in select combinations - High-Speed I2C0, High-Speed
+  I2C1, SPI, UART, High-Speed I2C0 and I2C1 or both High-Speed
+  I2C1 and UART.
+
+  In USIv2, only one protocol can be active at a time, either UART, SPI, or
+  High-Speed I2C.
+
+  The USI core shares internal circuits across protocols, meaning only the
+  selected configuration is active at any given time. USI is modeled as a node
+  with zero or more child nodes, each representing a serial sub-node device. The
+  mode setting selects which particular function will be used.
 
 properties:
   $nodename:
@@ -64,7 +74,7 @@ properties:
 
   samsung,mode:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2, 3]
+    enum: [0, 1, 2, 3, 4, 5, 6]
     description:
       Selects USI function (which serial protocol to use). Refer to
       <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
@@ -101,37 +111,62 @@ required:
   - samsung,sysreg
   - samsung,mode
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos850-usi
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-usi
+              - samsung,exynos850-usi
+              - samsung,exynosautov9-usi
+              - samsung,exynosautov920-usi
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI/I2C protocol
+
+        clock-names:
+          maxItems: 2
+
+        samsung,mode:
+          enum: [0, 1, 2, 3]
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos8895-usi
+
+    then:
+      properties:
+        reg: false
+
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI protocol
+
+        clock-names:
+          maxItems: 2
+
+        samsung,clkreq-on: false
 
-then:
-  properties:
-    reg:
-      maxItems: 1
-
-    clocks:
-      items:
-        - description: Bus (APB) clock
-        - description: Operating clock for UART/SPI/I2C protocol
-
-    clock-names:
-      maxItems: 2
-
-  required:
-    - reg
-    - clocks
-    - clock-names
-
-else:
-  properties:
-    reg: false
-    clocks: false
-    clock-names: false
-    samsung,clkreq-on: false
+      required:
+        - clocks
+        - clock-names
 
 additionalProperties: false
 
diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h
index b7c1406f3..aab28176c 100644
--- a/include/dt-bindings/soc/samsung,exynos-usi.h
+++ b/include/dt-bindings/soc/samsung,exynos-usi.h
@@ -13,5 +13,8 @@
 #define USI_MODE_UART		1
 #define USI_MODE_SPI		2
 #define USI_MODE_I2C		3
+#define USI_MODE_I2C1		4
+#define USI_MODE_I2C0_1		5
+#define USI_MODE_UART_I2C1	6
 
 #endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */
-- 
2.43.0