linux-kernel - [PATCH v2 2/2] serial: sc16is7xx: Add polling feature if no IRQ usage possible

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250106085051.50861-2-andre.werner@systec-electronic.com>
Date: Mon,  6 Jan 2025 09:50:51 +0100
From: Andre Werner <andre.werner@...tec-electronic.com>
To: gregkh@...uxfoundation.org,
	jirislaby@...nel.org,
	hvilleneuve@...onoff.com,
	andy@...nel.org,
	devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
	linux-serial@...r.kernel.org,
	lech.perczak@...lingroup.com,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	robh@...nel.org,
	Andre Werner <andre.werner@...tec-electronic.com>
Subject: [PATCH v2 2/2] serial: sc16is7xx: Add polling feature if no IRQ usage possible

Fall back to polling mode if no interrupt is configured because not
possible. If "interrupts" property is missing in devicetree the driver
uses a delayed worker to pull state of interrupt status registers.

Signed-off-by: Andre Werner <andre.werner@...tec-electronic.com>
---
V2:
- Change warning for polling mode to debug log entry
- Correct typo: Resuse -> Reuse
- Format define with missing tabs for SC16IS7XX_POLL_PERIOD
- Format struct declaration sc16is7xx_one_config with missing tabs for polling and shutdown
- Adapt dtbinding with new polling feature
---
---
 drivers/tty/serial/sc16is7xx.c | 40 ++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index a3093e09309f..cfe63fe8a729 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -314,6 +314,7 @@
 #define SC16IS7XX_FIFO_SIZE		(64)
 #define SC16IS7XX_GPIOS_PER_BANK	4
 
+#define SC16IS7XX_POLL_PERIOD		10 /*ms*/
 #define SC16IS7XX_RECONF_MD		BIT(0)
 #define SC16IS7XX_RECONF_IER		BIT(1)
 #define SC16IS7XX_RECONF_RS485		BIT(2)
@@ -348,6 +349,9 @@ struct sc16is7xx_port {
 	u8				mctrl_mask;
 	struct kthread_worker		kworker;
 	struct task_struct		*kworker_task;
+	struct kthread_delayed_work	poll_work;
+	bool				polling;
+	bool				shutdown;
 	struct sc16is7xx_one		p[];
 };
 
@@ -861,6 +865,19 @@ static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void sc16is7xx_transmission_poll(struct kthread_work *work)
+{
+	struct sc16is7xx_port *s = container_of(work, struct sc16is7xx_port, poll_work.work);
+
+	/* Reuse standard IRQ handler. Interrupt ID is unused in this context. */
+	sc16is7xx_irq(0, s);
+
+	/* setup delay based on SC16IS7XX_POLL_PERIOD */
+	if (!s->shutdown)
+		kthread_queue_delayed_work(&s->kworker, &s->poll_work,
+					   msecs_to_jiffies(SC16IS7XX_POLL_PERIOD));
+}
+
 static void sc16is7xx_tx_proc(struct kthread_work *ws)
 {
 	struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
@@ -1149,6 +1166,7 @@ static int sc16is7xx_config_rs485(struct uart_port *port, struct ktermios *termi
 static int sc16is7xx_startup(struct uart_port *port)
 {
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	unsigned int val;
 	unsigned long flags;
 
@@ -1210,6 +1228,11 @@ static int sc16is7xx_startup(struct uart_port *port)
 	uart_port_lock_irqsave(port, &flags);
 	sc16is7xx_enable_ms(port);
 	uart_port_unlock_irqrestore(port, flags);
+	if (s->polling) {
+		s->shutdown = false;
+		kthread_queue_delayed_work(&s->kworker, &s->poll_work,
+					   msecs_to_jiffies(SC16IS7XX_POLL_PERIOD));
+	}
 
 	return 0;
 }
@@ -1232,6 +1255,10 @@ static void sc16is7xx_shutdown(struct uart_port *port)
 
 	sc16is7xx_power(port, 0);
 
+	if (s->polling) {
+		s->shutdown = true;
+		kthread_cancel_delayed_work_sync(&s->poll_work);
+	}
 	kthread_flush_worker(&s->kworker);
 }
 
@@ -1537,7 +1564,13 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 
 	/* Always ask for fixed clock rate from a property. */
 	device_property_read_u32(dev, "clock-frequency", &uartclk);
+	s->polling = !device_property_present(dev, "interrupts");
 
+	if (s->polling) {
+		dev_dbg(dev,
+			"No interrupt definition found. Falling back to polling mode.\n");
+		irq = 0;
+	}
 	s->clk = devm_clk_get_optional(dev, NULL);
 	if (IS_ERR(s->clk))
 		return PTR_ERR(s->clk);
@@ -1664,6 +1697,11 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 	if (ret)
 		goto out_ports;
 #endif
+	if (s->polling) {
+		/* Initialize Kernel timer for polling */
+		kthread_init_delayed_work(&s->poll_work, sc16is7xx_transmission_poll);
+		return 0;
+	}
 
 	/*
 	 * Setup interrupt. We first try to acquire the IRQ line as level IRQ.
@@ -1724,6 +1762,8 @@ void sc16is7xx_remove(struct device *dev)
 		sc16is7xx_power(&s->p[i].port, 0);
 	}
 
+	if (s->polling)
+		kthread_cancel_delayed_work_sync(&s->poll_work);
 	kthread_flush_worker(&s->kworker);
 	kthread_stop(s->kworker_task);
 
-- 
2.47.1