linux-kernel - [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250106123122.3531845-2-c-vankar@ti.com>
Date: Mon, 6 Jan 2025 18:01:21 +0530
From: Chintan Vankar <c-vankar@...com>
To: Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Rob Herring <robh@...nel.org>, Tero Kristo
	<kristo@...nel.org>,
        Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon
	<nm@...com>
CC: <srk@...com>, <s-vadapalli@...com>, <danishanwar@...com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Chintan Vankar <c-vankar@...com>
Subject: [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to necessary nodes for CPSW to enable those
nodes during SPL stage along with later boot stages for AM68-SK.

Signed-off-by: Chintan Vankar <c-vankar@...com>
---
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 5 +++++
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 ++
 2 files changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..f1f8b228926d 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -333,6 +333,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
 			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
 			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio-default-pins {
@@ -340,6 +341,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
 			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
 			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
@@ -610,11 +612,13 @@ &main_sdhci1 {
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	bootph-all;
 };
 
 &davinci_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -624,6 +628,7 @@ phy0: ethernet-phy@0 {
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&phy0>;
+	bootph-all;
 };
 
 &mcu_mcan0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266126d0..cfae226d3c63 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -154,12 +154,14 @@ mcu_conf: bus@...00000 {
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
+			bootph-all;
 		};
 
 		phy_gmii_sel: phy@...0 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4040 0x4>;
 			#phy-cells = <1>;
+			bootph-all;
 		};
 
 	};
-- 
2.34.1