linux-kernel - Re: [PATCH v2 00/10] DTS updates for system1 BMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <173629037049.1994533.7630339914217766401.robh@kernel.org>
Date: Tue, 07 Jan 2025 16:54:32 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Ninad Palsule <ninad@...ux.ibm.com>
Cc: devicetree@...r.kernel.org, krzk+dt@...nel.org, netdev@...r.kernel.org, 
 davem@...emloft.net, andrew@...econstruct.com.au, 
 linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org, 
 ratbert@...aday-tech.com, minyard@....org, andrew+netdev@...n.ch, 
 edumazet@...gle.com, joel@....id.au, kuba@...nel.org, 
 openipmi-developer@...ts.sourceforge.net, pabeni@...hat.com, 
 eajames@...ux.ibm.com, linux-arm-kernel@...ts.infradead.org, 
 conor+dt@...nel.org
Subject: Re: [PATCH v2 00/10] DTS updates for system1 BMC


On Tue, 07 Jan 2025 10:23:37 -0600, Ninad Palsule wrote:
> Hello,
> 
> Please review the patch set.
> 
> V2:
> ---
>   Fixed CHECK_DTBS errors by
>     - Using generic node names
>     - Documenting phy-mode rgmii-rxid in ftgmac100.yaml
>     - Adding binding documentation for IPMB device interface
> 
> NINAD PALSULE (7):
>   ARM: dts: aspeed: system1: Add IPMB device
>   ARM: dts: aspeed: system1: Add GPIO line name
>   ARM: dts: aspeed: system1: Add RGMII support
>   ARM: dts: aspeed: system1: Reduce sgpio speed
>   ARM: dts: aspeed: system1: Update LED gpio name
>   ARM: dts: aspeed: system1: Remove VRs max8952
>   ARM: dts: aspeed: system1: Mark GPIO line high/low
> 
> Ninad Palsule (3):
>   dt-bindings: net: faraday,ftgmac100: Add phys mode
>   bindings: ipmi: Add binding for IPMB device intf
>   ARM: dts: aspeed: system1: Disable gpio pull down
> 
>  .../devicetree/bindings/ipmi/ipmb-dev.yaml    |  42 +++++
>  .../bindings/net/faraday,ftgmac100.yaml       |   3 +
>  .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 177 ++++++++++++------
>  3 files changed, 163 insertions(+), 59 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-system1.dtb' for 20250107162350.1281165-1-ninad@...ux.ibm.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@...80000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#