| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250107-ad7380-add-alert-support-v3-1-bce10afd656b@baylibre.com>
Date: Tue, 07 Jan 2025 09:48:25 +0100
From: Julien Stephan <jstephan@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
David Lechner <dlechner@...libre.com>, Jonathan Cameron <jic23@...nel.org>,
Jonathan Corbet <corbet@....net>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, Julien Stephan <jstephan@...libre.com>
Subject: [PATCH v3 1/5] iio: adc: ad7380: do not use
iio_device_claim_direct_scoped anymore
Conditionnal scoped handlers are turning out to be a real pain:
readability issues, compiler and linker handling issues among others so
rollback and remove the scoped version of iio_dvice_claim_direct_mode.
To impove code readability factorize code to set oversampling ratio.
Signed-off-by: Julien Stephan <jstephan@...libre.com>
---
drivers/iio/adc/ad7380.c | 110 +++++++++++++++++++++++++++++------------------
1 file changed, 67 insertions(+), 43 deletions(-)
diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c
index 4f32cb22f140442b831dc9a4f275e88e4ab2388e..bc7d58850a3e2a84a241d81377e3dc14c43fc101 100644
--- a/drivers/iio/adc/ad7380.c
+++ b/drivers/iio/adc/ad7380.c
@@ -675,15 +675,21 @@ static const struct regmap_config ad7380_regmap_config = {
static int ad7380_debugfs_reg_access(struct iio_dev *indio_dev, u32 reg,
u32 writeval, u32 *readval)
{
- iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
- struct ad7380_state *st = iio_priv(indio_dev);
+ struct ad7380_state *st = iio_priv(indio_dev);
+ int ret;
- if (readval)
- return regmap_read(st->regmap, reg, readval);
- else
- return regmap_write(st->regmap, reg, writeval);
- }
- unreachable();
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ if (readval)
+ ret = regmap_read(st->regmap, reg, readval);
+ else
+ ret = regmap_write(st->regmap, reg, writeval);
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
}
/*
@@ -920,6 +926,7 @@ static int ad7380_read_raw(struct iio_dev *indio_dev,
{
struct ad7380_state *st = iio_priv(indio_dev);
const struct iio_scan_type *scan_type;
+ int ret;
scan_type = iio_get_current_scan_type(indio_dev, chan);
@@ -928,11 +935,16 @@ static int ad7380_read_raw(struct iio_dev *indio_dev,
switch (info) {
case IIO_CHAN_INFO_RAW:
- iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
- return ad7380_read_direct(st, chan->scan_index,
- scan_type, val);
- }
- unreachable();
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = ad7380_read_direct(st, chan->scan_index,
+ scan_type, val);
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
case IIO_CHAN_INFO_SCALE:
/*
* According to the datasheet, the LSB size is:
@@ -1008,47 +1020,59 @@ static int ad7380_osr_to_regval(int ratio)
return -EINVAL;
}
+static int ad7380_set_oversampling_ratio(struct ad7380_state *st, int val)
+{
+ int ret, osr, boost;
+
+ osr = ad7380_osr_to_regval(val);
+ if (osr < 0)
+ return osr;
+
+ /* always enable resolution boost when oversampling is enabled */
+ boost = osr > 0 ? 1 : 0;
+
+ ret = regmap_update_bits(st->regmap,
+ AD7380_REG_ADDR_CONFIG1,
+ AD7380_CONFIG1_OSR | AD7380_CONFIG1_RES,
+ FIELD_PREP(AD7380_CONFIG1_OSR, osr) |
+ FIELD_PREP(AD7380_CONFIG1_RES, boost));
+
+ if (ret)
+ return ret;
+
+ st->oversampling_ratio = val;
+ st->resolution_boost_enabled = boost;
+
+ /*
+ * Perform a soft reset. This will flush the oversampling
+ * block and FIFO but will maintain the content of the
+ * configurable registers.
+ */
+ ret = regmap_update_bits(st->regmap,
+ AD7380_REG_ADDR_CONFIG2,
+ AD7380_CONFIG2_RESET,
+ FIELD_PREP(AD7380_CONFIG2_RESET,
+ AD7380_CONFIG2_RESET_SOFT));
+ return ret;
+}
static int ad7380_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val,
int val2, long mask)
{
struct ad7380_state *st = iio_priv(indio_dev);
- int ret, osr, boost;
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
- osr = ad7380_osr_to_regval(val);
- if (osr < 0)
- return osr;
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
- /* always enable resolution boost when oversampling is enabled */
- boost = osr > 0 ? 1 : 0;
+ ret = ad7380_set_oversampling_ratio(st, val);
- iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
- ret = regmap_update_bits(st->regmap,
- AD7380_REG_ADDR_CONFIG1,
- AD7380_CONFIG1_OSR | AD7380_CONFIG1_RES,
- FIELD_PREP(AD7380_CONFIG1_OSR, osr) |
- FIELD_PREP(AD7380_CONFIG1_RES, boost));
+ iio_device_release_direct_mode(indio_dev);
- if (ret)
- return ret;
-
- st->oversampling_ratio = val;
- st->resolution_boost_enabled = boost;
-
- /*
- * Perform a soft reset. This will flush the oversampling
- * block and FIFO but will maintain the content of the
- * configurable registers.
- */
- return regmap_update_bits(st->regmap,
- AD7380_REG_ADDR_CONFIG2,
- AD7380_CONFIG2_RESET,
- FIELD_PREP(AD7380_CONFIG2_RESET,
- AD7380_CONFIG2_RESET_SOFT));
- }
- unreachable();
+ return ret;
default:
return -EINVAL;
}
--
2.47.1
Powered by blists - more mailing lists