lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f77669b5-c174-48c7-8f0f-187d1f54ea91@linux.alibaba.com>
Date: Tue, 7 Jan 2025 19:30:28 +0800
From: Shuai Xue <xueshuai@...ux.alibaba.com>
To: Lukas Wunner <lukas@...ner.de>
Cc: bhelgaas@...gle.com, tony.luck@...el.com, bp@...en8.de,
 mhiramat@...nel.org, mathieu.desnoyers@...icios.com, oleg@...hat.com,
 naveen@...nel.org, davem@...emloft.net, anil.s.keshavamurthy@...el.com,
 mark.rutland@....com, peterz@...radead.org, rostedt@...dmis.org,
 linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-edac@...r.kernel.org, linux-trace-kernel@...r.kernel.org
Subject: Re: [PATCH v4] PCI: hotplug: Add a generic RAS tracepoint for hotplug
 event



在 2024/11/23 19:31, Shuai Xue 写道:
> Hotplug events are critical indicators for analyzing hardware health,
> particularly in AI supercomputers where surprise link downs can
> significantly impact system performance and reliability. The failure
> characterization analysis illustrates the significance of failures
> caused by the Infiniband link errors. Meta observes that 2% in a machine
> learning cluster and 6% in a vision application cluster of Infiniband
> failures co-occur with GPU failures, such as falling off the bus, which
> may indicate a correlation with PCIe.[1]
> 
> To this end, define a new TRACING_SYSTEM named pci, add a generic RAS
> tracepoint for hotplug event to help healthy check, and generate
> tracepoints for pcie hotplug event. To monitor these tracepoints in
> userspace, e.g. with rasdaemon, put `enum pci_hotplug_event` in uapi
> header.
> 
> The output like below:
> $ echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
> $ cat /sys/kernel/debug/tracing/trace_pipe
>             <...>-206     [001] .....    40.373870: pci_hp_event: 0000:00:02.0 slot:10, event:Link Down
> 
>             <...>-206     [001] .....    40.374871: pci_hp_event: 0000:00:02.0 slot:10, event:Card not present
> 
> [1]https://arxiv.org/abs/2410.21680
> 
> Suggested-by: Lukas Wunner <lukas@...ner.de>
> Suggested-by: Steven Rostedt <rostedt@...dmis.org>
> Signed-off-by: Shuai Xue <xueshuai@...ux.alibaba.com>
> Reviewed-by: Lukas Wunner <lukas@...ner.de>
> ---
> changes sincel v3:
> - rename TRACING_SYSTEM from pci_hotplug to pci
> - add Reviewed-by tag from Lukas
> - add Suggested-by tag from Lukas and Steven
> ---
>   drivers/pci/hotplug/pciehp_ctrl.c | 33 ++++++++++++---
>   drivers/pci/hotplug/trace.h       | 68 +++++++++++++++++++++++++++++++
>   include/uapi/linux/pci.h          |  7 ++++
>   3 files changed, 102 insertions(+), 6 deletions(-)
>   create mode 100644 drivers/pci/hotplug/trace.h
> 
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index dcdbfcf404dd..c836462ff067 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -21,6 +21,9 @@
>   #include <linux/pci.h>
>   #include "pciehp.h"
>   
> +#define CREATE_TRACE_POINTS
> +#include "trace.h"
> +
>   /* The following routines constitute the bulk of the
>      hotplug controller logic
>    */
> @@ -239,12 +242,20 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>   	case ON_STATE:
>   		ctrl->state = POWEROFF_STATE;
>   		mutex_unlock(&ctrl->state_lock);
> -		if (events & PCI_EXP_SLTSTA_DLLSC)
> +		if (events & PCI_EXP_SLTSTA_DLLSC) {
>   			ctrl_info(ctrl, "Slot(%s): Link Down\n",
>   				  slot_name(ctrl));
> -		if (events & PCI_EXP_SLTSTA_PDC)
> +			trace_pci_hp_event(pci_name(ctrl->pcie->port),
> +					   slot_name(ctrl),
> +					   PCI_HOTPLUG_LINK_DOWN);
> +		}
> +		if (events & PCI_EXP_SLTSTA_PDC) {
>   			ctrl_info(ctrl, "Slot(%s): Card not present\n",
>   				  slot_name(ctrl));
> +			trace_pci_hp_event(pci_name(ctrl->pcie->port),
> +					   slot_name(ctrl),
> +					   PCI_HOTPLUG_CARD_NOT_PRESENT);
> +		}
>   		pciehp_disable_slot(ctrl, SURPRISE_REMOVAL);
>   		break;
>   	default:
> @@ -264,6 +275,9 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>   					      INDICATOR_NOOP);
>   			ctrl_info(ctrl, "Slot(%s): Card not present\n",
>   				  slot_name(ctrl));
> +			trace_pci_hp_event(pci_name(ctrl->pcie->port),
> +					   slot_name(ctrl),
> +					   PCI_HOTPLUG_CARD_NOT_PRESENT);
>   		}
>   		mutex_unlock(&ctrl->state_lock);
>   		return;
> @@ -276,12 +290,19 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>   	case OFF_STATE:
>   		ctrl->state = POWERON_STATE;
>   		mutex_unlock(&ctrl->state_lock);
> -		if (present)
> +		if (present) {
>   			ctrl_info(ctrl, "Slot(%s): Card present\n",
>   				  slot_name(ctrl));
> -		if (link_active)
> -			ctrl_info(ctrl, "Slot(%s): Link Up\n",
> -				  slot_name(ctrl));
> +			trace_pci_hp_event(pci_name(ctrl->pcie->port),
> +					   slot_name(ctrl),
> +					   PCI_HOTPLUG_CARD_PRESENT);
> +		}
> +		if (link_active) {
> +			ctrl_info(ctrl, "Slot(%s): Link Up\n", slot_name(ctrl));
> +			trace_pci_hp_event(pci_name(ctrl->pcie->port),
> +					   slot_name(ctrl),
> +					   PCI_HOTPLUG_LINK_UP);
> +		}
>   		ctrl->request_result = pciehp_enable_slot(ctrl);
>   		break;
>   	default:
> diff --git a/drivers/pci/hotplug/trace.h b/drivers/pci/hotplug/trace.h
> new file mode 100644
> index 000000000000..5b60cd7bcffb
> --- /dev/null
> +++ b/drivers/pci/hotplug/trace.h
> @@ -0,0 +1,68 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#if !defined(_TRACE_HW_EVENT_PCI_HP_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_HW_EVENT_PCI_HP_H
> +
> +#include <linux/tracepoint.h>
> +
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM pci
> +
> +#define PCI_HOTPLUG_EVENT					\
> +	EM(PCI_HOTPLUG_LINK_UP,			"Link Up")	\
> +	EM(PCI_HOTPLUG_LINK_DOWN,		"Link Down")	\
> +	EM(PCI_HOTPLUG_CARD_PRESENT,		"Card present")	\
> +	EMe(PCI_HOTPLUG_CARD_NOT_PRESENT,	"Card not present")
> +
> +/* Enums require being exported to userspace, for user tool parsing */
> +#undef EM
> +#undef EMe
> +#define EM(a, b)	TRACE_DEFINE_ENUM(a);
> +#define EMe(a, b)	TRACE_DEFINE_ENUM(a);
> +
> +PCI_HOTPLUG_EVENT
> +
> +/*
> + * Now redefine the EM() and EMe() macros to map the enums to the strings
> + * that will be printed in the output.
> + */
> +#undef EM
> +#undef EMe
> +#define EM(a, b)	{a, b},
> +#define EMe(a, b)	{a, b}
> +
> +TRACE_EVENT(pci_hp_event,
> +
> +	TP_PROTO(const char *port_name,
> +		 const char *slot,
> +		 const int event),
> +
> +	TP_ARGS(port_name, slot, event),
> +
> +	TP_STRUCT__entry(
> +		__string(	port_name,	port_name	)
> +		__string(	slot,		slot		)
> +		__field(	int,		event	)
> +	),
> +
> +	TP_fast_assign(
> +		__assign_str(port_name);
> +		__assign_str(slot);
> +		__entry->event = event;
> +	),
> +
> +	TP_printk("%s slot:%s, event:%s\n",
> +		__get_str(port_name),
> +		__get_str(slot),
> +		__print_symbolic(__entry->event, PCI_HOTPLUG_EVENT)
> +	)
> +);
> +
> +#endif /* _TRACE_HW_EVENT_PCI_HP_H */
> +
> +#undef TRACE_INCLUDE_PATH
> +#define TRACE_INCLUDE_PATH  ../../drivers/pci/hotplug
> +#undef TRACE_INCLUDE_FILE
> +#define TRACE_INCLUDE_FILE trace
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
> diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h
> index a769eefc5139..4f150028965d 100644
> --- a/include/uapi/linux/pci.h
> +++ b/include/uapi/linux/pci.h
> @@ -39,4 +39,11 @@
>   #define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
>   #define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
>   
> +enum pci_hotplug_event {
> +	PCI_HOTPLUG_LINK_UP,
> +	PCI_HOTPLUG_LINK_DOWN,
> +	PCI_HOTPLUG_CARD_PRESENT,
> +	PCI_HOTPLUG_CARD_NOT_PRESENT,
> +};
> +
>   #endif /* _UAPILINUX_PCI_H */

Hi, Lukas,

I hope you're doing well.

I would like to inquire that if there are any further actions required from my
end to proceed for this patch?

Additionally, I would appreciate if you could inform me about who will be
pick up this patch.

Thank you.

Best Regards,
Shuai

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ