| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250107125854.227233-1-krzysztof.kozlowski@linaro.org>
Date: Tue, 7 Jan 2025 13:58:51 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Inki Dae <inki.dae@...sung.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
Krishna Manikandan <quic_mkrishn@...cinc.com>,
Jonathan Marek <jonathan@...ek.ca>,
Mahadevan <quic_mahap@...cinc.com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Jacopo Mondi <jacopo+renesas@...ndi.org>,
dri-devel@...ts.freedesktop.org,
linux-amlogic@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
imx@...ts.linux.dev,
linux-mediatek@...ts.infradead.org,
linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org,
linux-renesas-soc@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../display/amlogic,meson-dw-hdmi.yaml | 8 +-
.../display/bridge/fsl,imx8mp-hdmi-tx.yaml | 28 +++---
.../display/bridge/samsung,mipi-dsim.yaml | 66 ++++++-------
.../display/mediatek/mediatek,aal.yaml | 46 ++++-----
.../display/msm/dsi-controller-main.yaml | 98 +++++++++----------
.../bindings/display/msm/dsi-phy-10nm.yaml | 40 ++++----
.../bindings/display/msm/dsi-phy-14nm.yaml | 34 +++----
.../bindings/display/msm/dsi-phy-20nm.yaml | 36 +++----
.../bindings/display/msm/dsi-phy-28nm.yaml | 34 +++----
.../bindings/display/msm/dsi-phy-7nm.yaml | 34 +++----
.../display/msm/qcom,sa8775p-mdss.yaml | 7 +-
.../bindings/display/renesas,cmm.yaml | 12 +--
12 files changed, 221 insertions(+), 222 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 84d68b8cfccc..416fe263ac92 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -148,10 +148,10 @@ examples:
/* TMDS Output */
hdmi_tx_tmds_port: port@1 {
- reg = <1>;
+ reg = <1>;
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
index 3791c9f4ebab..05442d437755 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -82,21 +82,21 @@ examples:
power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
reg-io-width = <1>;
ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
- hdmi_tx_from_pvi: endpoint {
- remote-endpoint = <&pvi_to_hdmi_tx>;
- };
- };
+ endpoint {
+ remote-endpoint = <&pvi_to_hdmi_tx>;
+ };
+ };
- port@1 {
- reg = <1>;
- hdmi_tx_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index 4ed7a799ba26..62625fc0c44b 100644
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -241,40 +241,40 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
dsi@...00000 {
- compatible = "samsung,exynos5433-mipi-dsi";
- reg = <0x13900000 0xC0>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&mipi_phy 1>;
- phy-names = "dsim";
- clocks = <&cmu_disp CLK_PCLK_DSIM0>,
- <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
- <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
- <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
- <&cmu_disp CLK_SCLK_DSIM0>;
- clock-names = "bus_clk",
- "phyclk_mipidphy0_bitclkdiv8",
- "phyclk_mipidphy0_rxclkesc0",
- "sclk_rgb_vclk_to_dsim0",
- "sclk_mipi";
- power-domains = <&pd_disp>;
- vddcore-supply = <&ldo6_reg>;
- vddio-supply = <&ldo7_reg>;
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
+ compatible = "samsung,exynos5433-mipi-dsi";
+ reg = <0x13900000 0xC0>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+ <&cmu_disp CLK_SCLK_DSIM0>;
+ clock-names = "bus_clk",
+ "phyclk_mipidphy0_bitclkdiv8",
+ "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0",
+ "sclk_mipi";
+ power-domains = <&pd_disp>;
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- dsi_to_mic: endpoint {
- remote-endpoint = <&mic_to_dsi>;
- };
- };
- };
+ dsi_to_mic: endpoint {
+ remote-endpoint = <&mic_to_dsi>;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 47ddba5c41af..5d2089dc596e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -104,30 +104,30 @@ examples:
#size-cells = <2>;
aal@...15000 {
- compatible = "mediatek,mt8173-disp-aal";
- reg = <0 0x14015000 0 0x1000>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- clocks = <&mmsys CLK_MM_DISP_AAL>;
- mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+ compatible = "mediatek,mt8173-disp-aal";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_AAL>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
- aal0_in: endpoint {
- remote-endpoint = <&ccorr0_out>;
- };
- };
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
- port@1 {
- reg = <1>;
- aal0_out: endpoint {
- remote-endpoint = <&gamma0_in>;
- };
- };
- };
- };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index b0fd96b76ed1..2ad549801c2a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -416,63 +416,63 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,gcc-sdm845.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
- dsi@...4000 {
- compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
- reg = <0x0ae94000 0x400>;
- reg-names = "dsi_ctrl";
+ dsi@...4000 {
+ compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- interrupt-parent = <&mdss>;
- interrupts = <4>;
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
- clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
- <&dispcc DISP_CC_MDSS_ESC0_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
- phys = <&dsi0_phy>;
- phy-names = "dsi";
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
- power-domains = <&rpmhpd SC7180_CX>;
- operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&dsi_opp_table>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&dpu_intf1_out>;
- };
- };
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
- port@1 {
- reg = <1>;
- dsi0_out: endpoint {
- remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
- qcom,te-source = "mdp_vsync_e";
- };
- };
- };
- };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+ qcom,te-source = "mdp_vsync_e";
+ };
+ };
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 69d13867b7cf..fc9abf090f0d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -74,28 +74,28 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
- dsi-phy@...4400 {
- compatible = "qcom,dsi-phy-10nm";
- reg = <0x0ae94400 0x200>,
- <0x0ae94600 0x280>,
- <0x0ae94a00 0x1e0>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ dsi-phy@...4400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
- #clock-cells = <1>;
- #phy-cells = <0>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- vdds-supply = <&vdda_mipi_dsi0_pll>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
- qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
- qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
- qcom,phy-drive-ldo-level = <400>;
- };
+ qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+ qcom,phy-drive-ldo-level = <400>;
+ };
...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 52bbe132e6da..8fbfa9edb20c 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -55,24 +55,24 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
- dsi-phy@...4400 {
- compatible = "qcom,dsi-phy-14nm";
- reg = <0x0ae94400 0x200>,
- <0x0ae94600 0x280>,
- <0x0ae94a00 0x1e0>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ dsi-phy@...4400 {
+ compatible = "qcom,dsi-phy-14nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
- #clock-cells = <1>;
- #phy-cells = <0>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- vcca-supply = <&vcca_reg>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
- };
+ vcca-supply = <&vcca_reg>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
index 7e6687cb002b..93570052992a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -45,26 +45,26 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
- dsi-phy@...22a00 {
- compatible = "qcom,dsi-phy-20nm";
- reg = <0xfd922a00 0xd4>,
- <0xfd922b00 0x2b0>,
- <0xfd922d80 0x7b>;
- reg-names = "dsi_pll",
- "dsi_phy",
- "dsi_phy_regulator";
+ dsi-phy@...22a00 {
+ compatible = "qcom,dsi-phy-20nm";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x2b0>,
+ <0xfd922d80 0x7b>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
- #clock-cells = <1>;
- #phy-cells = <0>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- vcca-supply = <&vcca_reg>;
- vddio-supply = <&vddio_reg>;
+ vcca-supply = <&vcca_reg>;
+ vddio-supply = <&vddio_reg>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
- };
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index a55c2445d189..371befa9f9d2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -51,25 +51,25 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
- dsi-phy@...22a00 {
- compatible = "qcom,dsi-phy-28nm-lp";
- reg = <0xfd922a00 0xd4>,
- <0xfd922b00 0x2b0>,
- <0xfd922d80 0x7b>;
- reg-names = "dsi_pll",
- "dsi_phy",
- "dsi_phy_regulator";
+ dsi-phy@...22a00 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x2b0>,
+ <0xfd922d80 0x7b>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
- #clock-cells = <1>;
- #phy-cells = <0>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- vddio-supply = <&vddio_reg>;
+ vddio-supply = <&vddio_reg>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
- };
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 7e764eac3ef3..321470435e65 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -54,23 +54,23 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
- dsi-phy@...4400 {
- compatible = "qcom,dsi-phy-7nm";
- reg = <0x0ae94400 0x200>,
- <0x0ae94600 0x280>,
- <0x0ae94900 0x260>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ dsi-phy@...4400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
- #clock-cells = <1>;
- #phy-cells = <0>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- vdds-supply = <&vreg_l5a_0p88>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
- };
+ vdds-supply = <&vreg_l5a_0p88>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
index 58f8a01f29c7..e567afb44b3f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -78,7 +78,6 @@ examples:
"mdp1-mem",
"cpu-cfg";
-
resets = <&dispcc_core_bcr>;
power-domains = <&dispcc_gdsc>;
@@ -129,7 +128,7 @@ examples:
port@0 {
reg = <0>;
dpu_intf0_out: endpoint {
- remote-endpoint = <&mdss0_dp0_in>;
+ remote-endpoint = <&mdss0_dp0_in>;
};
};
};
@@ -208,8 +207,8 @@ examples:
};
port@1 {
- reg = <1>;
- mdss0_dp_out: endpoint { };
+ reg = <1>;
+ mdss0_dp_out: endpoint { };
};
};
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index 561efaaa5a91..fc4933c343cd 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -58,10 +58,10 @@ examples:
#include <dt-bindings/power/r8a7796-sysc.h>
cmm0: cmm@...40000 {
- compatible = "renesas,r8a7796-cmm",
- "renesas,rcar-gen3-cmm";
- reg = <0xfea40000 0x1000>;
- power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- clocks = <&cpg CPG_MOD 711>;
- resets = <&cpg 711>;
+ compatible = "renesas,r8a7796-cmm",
+ "renesas,rcar-gen3-cmm";
+ reg = <0xfea40000 0x1000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 711>;
+ resets = <&cpg 711>;
};
--
2.43.0
Powered by blists - more mailing lists