linux-kernel - [PATCH v4 5/5] docs: iio: ad7380: add alert support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250108-ad7380-add-alert-support-v4-5-1751802471ba@baylibre.com>
Date: Wed, 08 Jan 2025 13:49:37 +0100
From: Julien Stephan <jstephan@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>, 
 Michael Hennerich <Michael.Hennerich@...log.com>, 
 Nuno Sá <nuno.sa@...log.com>, 
 David Lechner <dlechner@...libre.com>, Jonathan Cameron <jic23@...nel.org>, 
 Jonathan Corbet <corbet@....net>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-doc@...r.kernel.org, Julien Stephan <jstephan@...libre.com>
Subject: [PATCH v4 5/5] docs: iio: ad7380: add alert support

Add a section for alert support, explaining how user can use iio events
attributes to enable alert and set thresholds.

Reviewed-by: David Lechner <dlechner@...libre.com>
Signed-off-by: Julien Stephan <jstephan@...libre.com>
---
 Documentation/iio/ad7380.rst | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/Documentation/iio/ad7380.rst b/Documentation/iio/ad7380.rst
index c46127700e14ca9ec3cac0bd5776b6702f2659e2..cff688bcc2d9601a9faf42d5e9c217486639ca66 100644
--- a/Documentation/iio/ad7380.rst
+++ b/Documentation/iio/ad7380.rst
@@ -92,6 +92,38 @@ must restart iiod using the following command:
 
 	root:~# systemctl restart iiod
 
+Alert
+-----
+
+2 channels variants of the ad738x family, can use the SDOB line as an alert pin
+when configured in 1 SDO line mode. 4 channels variants, can use SDOD as an
+alert pin when configured in 1 or 2 SDO line(s) mode, although only 1 SDO line
+mode is currently supported by the driver (see `SPI wiring modes`_).
+
+At the end of a conversion the active-low alert pin gets asserted if the
+conversion result exceeds the alert high limit or falls below the alert low
+limit. It is cleared, on a falling edge of CS. The alert pin is common to all
+channels.
+
+User can enable alert using the regular iio events attribute:
+
+.. code-block:: bash
+
+	events/thresh_either_en
+
+The high and low thresholds are common to all channels and can also be set using
+regular iio events attributes:
+
+.. code-block:: bash
+
+	events/in_thresh_falling_value
+	events/in_thresh_rising_value
+
+If debugfs is available, user can read the ALERT register to determine the
+faulty channel and direction.
+
+In most use cases, user will hardwire the alert pin to trigger a shutdown.
+
 Channel selection and sequencer (single-end chips only)
 -------------------------------------------------------
 
@@ -144,7 +176,6 @@ Unimplemented features
 - Rolling average oversampling
 - Power down mode
 - CRC indication
-- Alert
 
 
 Device buffers

-- 
2.47.1