| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250110210812.bdpypzvmg6s6sr5t@itinerary>
Date: Fri, 10 Jan 2025 15:08:12 -0600
From: Nishanth Menon <nm@...com>
To: Arnd <arnd@...db.de>, SoC list <soc@...ts.linux.dev>
CC: <soc@...nel.org>, <arm@...nel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Tony
Lindgren <tony@...mide.com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero
Kristo <kristo@...nel.org>, Nishanth Menon <nm@...com>
Subject: [GIT PULL 3/4] arm64: dts: ti: K3 devicetree updates for v6.14
Hi SoC maintainers,
Please pull the following. Please note that there is a minor checkpatch
warning around "Reported-by" without "Closes" - the report was an
internal report with no public facing URL and was hence skipped. I
decided to leave it alone to acknowledge the reporter.
The following changes since commit 40384c840ea1944d7c5a392e8975ed088ecf0b37:
Linux 6.13-rc1 (2024-12-01 14:28:56 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.14
for you to fetch changes up to 5532b8a9ce0e80514e37a1e082824934663580a3:
arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0 (2025-01-08 09:45:52 -0600)
----------------------------------------------------------------
TI K3 device tree updates for v6.14
Generic Fixups/Cleanups:
- Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for
ethernet phy
- Clock description added to ICSS-G
SoC Specific features and Fixes:
- Duplicate GICR reg defines in am62x/am62ax
- Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same
behavior as other K3 SoCs.
- Introduction of deep-sleep state defines for pinctrl header
AM62Ax
- Enable ti-sysc for wkup_uart0
AM64:
- Switch ICSSG clock to core clock.
J7200:
- Disable SPI1 loopback default.
J784s4:
- Clock ID fix for McSPI instances
- Use j7200-padconf compatibility for padconf to enable suspend-to-ram support.
Board Specific:
AM62
- phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge,
vcc-supply for i2c eeprom
- SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node,
M4 mailbox node redefinition fixup.
- BeaglePlay: Fix ethernet phy reset time
AM64
- hummingboard-t: Convert PCIE/USB overlays to independent dts.
j7200:
- EVM: fix typo in overlay name.
j721e:
- EVM: overlay for pcie1 endpoint mode.
j722s:
- EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable
PMIC
- AM67a-beagley-ai: Add remote proc nodes
j784s4:
- AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to
indicate ones that are needed through boot phases.
- AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode.
----------------------------------------------------------------
Andrew Davis (3):
arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition
arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level
arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes
Andrew Halaney (2):
arm64: dts: ti: k3-j784s4-evm: Mark tps659413 regulators as bootph-all
arm64: dts: ti: k3-am69-sk: Mark tps659413 regulators as bootph-all
Anurag Dutta (2):
arm64: dts: ti: k3-j784s4: Fix clock IDs for MCSPI instances
arm64: dts: ti: k3-j7200: Add node to disable loopback connection
Bhavya Kapoor (1):
arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0
Bryan Brattlof (2):
arm64: dts: ti: k3-am62: Remove duplicate GICR reg
arm64: dts: ti: k3-am62a: Remove duplicate GICR reg
Chintan Vankar (1):
arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
Dasnavis Sabiya (1):
arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support
Francesco Valla (1):
arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time
Josua Mayer (1):
arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts
MD Danish Anwar (2):
dt-bindings: soc: ti: pruss: Add clocks for ICSSG
arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
Rob Herring (Arm) (1):
arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties
Siddharth Vadapalli (7):
arm64: dts: ti: k3-pinctrl: Introduce deep sleep macros
arm64: dts: ti: k3-am62x-sk-common: Support SoC wakeup using USB1 wakeup
arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot
arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo"
arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode
Thomas Richard (1):
arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible
Udit Kumar (1):
arm64: dts: ti: k3-j722s-evm: Enable PMIC
Vibhore Vardhan (1):
arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0
Wadim Egorov (4):
arm64: dts: ti: k3-am62x-phyboard-lyra: Set RGB input to 16-bit for HDMI bridge
arm64: dts: ti: k3-am62x-phyboard-lyra: Add HDMI bridge regulators
arm64: dts: ti: k3-am62-phycore-som: Define vcc-supply for I2C EEPROM
arm64: dts: ti: am62-phyboard-lyra: Provide a vcc-supply for the I2C EEPROM
.../devicetree/bindings/soc/ti/ti,pruss.yaml | 10 ++
arch/arm64/boot/dts/ti/Makefile | 19 ++-
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 11 ++
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 7 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 36 ++++-
.../boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 5 +
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 4 +
arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 24 ++++
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 22 ++-
...-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} | 14 +-
...-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} | 13 +-
.../boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 6 -
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 158 +++++++++++++++++++++
.../dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso | 53 +++++++
arch/arm64/boot/dts/ti/k3-am69-sk-pcie0-ep.dtso | 53 +++++++
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 41 ++++++
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 4 +
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 7 +
arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso | 53 +++++++
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 102 +++++++++++++
.../boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 8 ++
.../boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 22 +--
.../dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi | 12 +-
arch/arm64/boot/dts/ti/k3-pinctrl.h | 19 +++
28 files changed, 654 insertions(+), 59 deletions(-)
rename arch/arm64/boot/dts/ti/{k3-am642-hummingboard-t-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} (78%)
rename arch/arm64/boot/dts/ti/{k3-am642-hummingboard-t-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} (74%)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-am69-sk-pcie0-ep.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists