[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250110105753.223049-1-j-choudhary@ti.com>
Date: Fri, 10 Jan 2025 16:27:53 +0530
From: Jayesh Choudhary <j-choudhary@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<devicetree@...r.kernel.org>, <s-vadapalli@...com>
CC: <linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<c-vankar@...com>, <j-choudhary@...com>
Subject: [PATCH v2] arm64: dts: ti: k3-j784s4-evm-quad-port-eth-exp1: Remove duplicate hogs
The j784s4-evm board dts now has the gpio hogs for MUX2 after integration
of audio support. Remove duplicate gpio-hogs from the overlay dtso to
prevent mux probe failures leading to can-phy3 deferred probe:
'gpio-mux mux-controller: probe with driver gpio-mux failed with error -16'
Fixes: 479112c9f531 ("arm64: dts: ti: k3-j784s4-evm: Enable analog audio support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@...com>
Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
---
GPIO 13 and 15 are set to high in k3-j784s4-evm.dts in exp2 node
as gpio-hog and GPIO 14 is set to high using idle-state in mux1 node.
Log with probe issue:
<https://gist.github.com/Jayesh2000/861ba647dfaec2dd8ed745a5b8d002e4>
Log with this fix:
<https://gist.github.com/Jayesh2000/73d59504d52a36bb31fe49a4faae2693>
Changelog v1->v2:
- Add Fixes tag
- Fix typo in commit heading
- Pick up R-by
v1 patch:
<https://lore.kernel.org/all/20250110101855.156136-1-j-choudhary@ti.com/>
.../boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
index dcd2c7c39ec3..c1f9573557d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
@@ -102,13 +102,6 @@ qsgmii-line-hog {
gpios = <16 GPIO_ACTIVE_HIGH>;
output-low;
};
-
- /* Toggle MUX2 for MDIO lines */
- mux-sel-hog {
- gpio-hog;
- gpios = <13 GPIO_ACTIVE_HIGH>, <14 GPIO_ACTIVE_HIGH>, <15 GPIO_ACTIVE_HIGH>;
- output-high;
- };
};
&main_pmx0 {
--
2.34.1
Powered by blists - more mailing lists