| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <30f6644c-bf35-dd5e-4f1c-d1f1915b97da@linux.intel.com>
Date: Fri, 10 Jan 2025 13:30:02 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Joshua Grisham <josh@...huagrisham.com>
cc: W_Armin@....de, thomas@...ch.de, kuurtb@...il.com,
Hans de Goede <hdegoede@...hat.com>, platform-driver-x86@...r.kernel.org,
corbet@....net, linux-doc@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5] platform/x86: samsung-galaxybook: Add samsung-galaxybook
driver
On Thu, 9 Jan 2025, Joshua Grisham wrote:
> Add a new driver for Samsung Galaxy Book series notebook devices with the
> following features:
>
> - Keyboard backlight control
> - Battery extension with charge control end threshold
> - Controller for Samsung's performance modes using the platform profile
> interface
> - Adds firmware-attributes to control various system features
> - Handles various hotkeys and notifications
>
> Signed-off-by: Joshua Grisham <josh@...huagrisham.com>
>
> ---
>
> v1->v2:
> - Attempt to resolve all review comments from v1 as written here:
> https://lore.kernel.org/platform-driver-x86/53c5075b-1967-45d0-937f-463912dd966d@gmx.de/T/#mbcbd8d5d9bc4496bac5486636c7d3b32bc3e5cd0
>
> v2->v3:
> - Tweak to battery attribute to closer match pattern in dell-wmi-ddv
> - implement platform_profile_remove() change from
> 9b3bb37b44a317626464e79da8b39989b421963f
> - Small tweak to Documentation page
>
> v3->v4:
> - Remove custom tracepoint (can trace via existing mechanisms)
> - Remove module parameters
> - Move sysfs attributes from device to firmware-attributes
> - Refactor "allow_recording" to "camera_lens_cover" plus other small
> renames in aim to have more standardized naming that are cross-vendor
> - Attempt to improve locking mechanisms
> - Tweak logic for setting and getting led brightness
> - More fixes for aiming to use devres/devm pattern
> - Change battery charge end threshold to use 1 to 100 instead of 0 to 99
> - Add swtich input event for camera_lens_cover remove all others (they will
> be generated as ACPI netlink events instead)
> - Various other small tweaks and features as requested from feedback
>
> v4-v5:
> - Prefix all locally defined symbols with "GB_" as a namespace
> - Remove extra unused out_buf from galaxybook_acpi_method
> - Tighten up logic flow for setting and unsetting global pointer (now it
> is done directly in association with the i8042 filter init and exit)
> - Rename "camera_lens_cover" to "block_recording"
> - Change input device to only apply for "Camera Lens Cover", remove sparse
> keymap and set capabilities manually as part of block_recording init,
> then notify using input_report_switch when setting block_recording
> - Correct firmware-attributes enumeration implementation (adding all
> attributes) and remove erroneous ABI fw attrs docs update
> - Few small tweaks to how locks are used
> - Use device_unregister instead of device_destroy for firmware attributes
> device
> - Tighten up and clean up performance mode to profile mapping logic; now
> the mapping is largely "fixed" apart from "Ultra" that will map to
> performance while also re-mapping "Performance" to balanced-performance
> - Tighten up error handling so probe will fail in more cases where it
> should fail
> - Replace platform_profile_register with devm_platform_profile_register
> ---
> Documentation/admin-guide/laptops/index.rst | 1 +
> .../laptops/samsung-galaxybook.rst | 170 ++
> MAINTAINERS | 7 +
> drivers/platform/x86/Kconfig | 17 +
> drivers/platform/x86/Makefile | 5 +-
> drivers/platform/x86/samsung-galaxybook.c | 1482 +++++++++++++++++
> 6 files changed, 1680 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/admin-guide/laptops/samsung-galaxybook.rst
> create mode 100644 drivers/platform/x86/samsung-galaxybook.c
>
> diff --git a/Documentation/admin-guide/laptops/index.rst b/Documentation/admin-guide/laptops/index.rst
> index cd9a1c2695fd..e71c8984c23e 100644
> --- a/Documentation/admin-guide/laptops/index.rst
> +++ b/Documentation/admin-guide/laptops/index.rst
> @@ -11,6 +11,7 @@ Laptop Drivers
> disk-shock-protection
> laptop-mode
> lg-laptop
> + samsung-galaxybook
> sony-laptop
> sonypi
> thinkpad-acpi
> diff --git a/Documentation/admin-guide/laptops/samsung-galaxybook.rst b/Documentation/admin-guide/laptops/samsung-galaxybook.rst
> new file mode 100644
> index 000000000000..f6af0c84de2c
> --- /dev/null
> +++ b/Documentation/admin-guide/laptops/samsung-galaxybook.rst
> @@ -0,0 +1,170 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +===================
> +Samsung Galaxy Book
> +===================
> +
> +Joshua Grisham <josh@...huagrisham.com>
> +
> +This is a Linux x86 platform driver for Samsung Galaxy Book series notebook
> +devices which utilizes Samsung's ``SCAI`` ACPI device in order to control
> +extra features and receive various notifications.
> +
> +Supported devices
> +=================
> +
> +Any device with one of the supported ACPI device IDs should be supported. This
> +covers most of the "Samsung Galaxy Book" series notebooks that are currently
> +available as of this writing, and could include other Samsung notebook devices
> +as well.
> +
> +Status
> +======
> +
> +The following features are currently supported:
> +
> +- :ref:`Keyboard backlight <keyboard-backlight>` control
> +- :ref:`Performance mode <performance-mode>` control implemented using the
> + platform profile interface
> +- :ref:`Battery charge control end threshold
> + <battery-charge-control-end-threshold>` (stop charging battery at given
> + percentage value) implemented as a battery hook
> +- :ref:`Firmware Attributes <firmware-attributes>` to allow control of various
> + device settings
> +- :ref:`Handling of Fn hotkeys <keyboard-hotkey-actions>` for various actions
> +- :ref:`Handling of ACPI notifications and hotkeys
> + <acpi-notifications-and-hotkey-actions>`
> +
> +Because different models of these devices can vary in their features, there is
> +logic built within the driver which attempts to test each implemented feature
> +for a valid response before enabling its support (registering additional devices
> +or extensions, adding sysfs attributes, etc). Therefore, it can be important to
> +note that not all features may be supported for your particular device.
> +
> +The following features might be possible to implement but will require
> +additional investigation and are therefore not supported at this time:
> +
> +- "Dolby Atmos" mode for the speakers
> +- "Outdoor Mode" for increasing screen brightness on models with ``SAM0427``
> +- "Silent Mode" on models with ``SAM0427``
> +
> +.. _keyboard-backlight:
> +
> +Keyboard backlight
> +==================
> +
> +A new LED class named ``samsung-galaxybook::kbd_backlight`` is created which
> +will then expose the device using the standard sysfs-based LED interface at
> +``/sys/class/leds/samsung-galaxybook::kbd_backlight``. Brightness can be
> +controlled by writing the desired value to the ``brightness`` sysfs attribute or
> +with any other desired userspace utility.
> +
> +.. note::
> + Most of these devices have an ambient light sensor which also turns
> + off the keyboard backlight under well-lit conditions. This behavior does not
> + seem possible to control at this time, but can be good to be aware of.
> +
> +.. _performance-mode:
> +
> +Performance mode
> +================
> +
> +This driver implements the
> +Documentation/userspace-api/sysfs-platform_profile.rst interface for working
> +with the "performance mode" function of the Samsung ACPI device.
> +
> +Mapping of each Samsung "performance mode" to its respective platform profile is
> +performed dynamically by the driver, as not all models support all of the same
> +performance modes. Your device might have one or more of the following mappings:
> +
> +- "Silent" maps to ``low-power``
> +- "Quiet" maps to ``quiet``
> +- "Optimized" maps to ``balanced``
> +- "Performance" maps to ``performance``
> +- For devices which support "Ultra", "Ultra" will map to ``performance`` and
> + "Performance" will be re-mapped to ``balanced-performance``.
> +
> +The result of the mapping can be printed in the kernel log when the module is
> +loaded. Supported profiles can also be retrieved from
> +``/sys/firmware/acpi/platform_profile_choices``, while
> +``/sys/firmware/acpi/platform_profile`` can be used to read or write the
> +currently selected profile.
> +
> +The ``balanced`` platform profile will be set during module load if no profile
> +has been previously set.
> +
> +.. _battery-charge-control-end-threshold:
> +
> +Battery charge control end threshold
> +====================================
> +
> +This platform driver will add the ability to set the battery's charge control
> +end threshold, but does not have the ability to set a start threshold.
> +
> +This feature is typically called "Battery Saver" by the various Samsung
> +applications in Windows, but in Linux we have implemented the standardized
> +"charge control threshold" sysfs interface on the battery device to allow for
> +controlling this functionality from the userspace.
> +
> +The sysfs attribute
> +``/sys/class/power_supply/BAT1/charge_control_end_threshold`` can be used to
> +read or set the desired charge end threshold.
> +
> +If you wish to maintain interoperability with Windows, then you should set the
> +value to 80 to represent "on", or 100 to represent "off", as these are the
> +values currently recognized by the various Windows-based Samsung applications
> +and services as "on" or "off". Otherwise, the device will accept any value
> +between 1 and 100 as the percentage that you wish the battery to stop charging
> +at.
> +
> +.. _firmware-attributes:
> +
> +Firmware Attributes
> +===================
> +
> +The following enumeration-typed firmware attributes are set up by this driver
> +and should be accessible under
> +``/sys/class/firmware-attributes/samsung-galaxybook/attributes/`` if your device
> +supports them:
> +
> +- ``power_on_lid_open`` (device should power on when the lid is opened)
> +- ``usb_charging`` (USB ports can deliver power to connected devices even when
> + the device is powered off or in a low sleep state)
> +- ``block_recording`` (blocks access to camera and microphone)
> +
> +All of these attributes are simple boolean-like enumeration values which use 0
> +to represent "off" and 1 to represent "on". Use the ``current_value`` attribute
> +to get or change the setting on the device.
> +
> +Note that when ``block_recording`` is updated, the input device "Samsung Galaxy
> +Book Lens Cover" will receive a ``SW_CAMERA_LENS_COVER`` switch event which
> +reflects the current state.
> +
> +.. _keyboard-hotkey-actions:
> +
> +Keyboard hotkey actions (i8042 filter)
> +======================================
> +
> +The i8042 filter will swallow the keyboard events for the Fn+F9 hotkey (Multi-
> +level keyboard backlight toggle) and Fn+F10 hotkey (Block recording toggle)
> +and instead execute their actions within the driver itself.
> +
> +Fn+F9 will cycle through the brightness levels of the keyboard backlight. A
> +notification will be sent using ``led_classdev_notify_brightness_hw_changed``
> +so that the userspace can be aware of the change. This mimics the behavior of
> +other existing devices where the brightness level is cycled internally by the
> +embedded controller and then reported via a notification.
> +
> +Fn+F10 will toggle the value of the "block recording" setting, which blocks
> +or allows usage of the built-in camera and microphone.
> +
> +.. _acpi-notifications-and-hotkey-actions:
> +
> +ACPI notifications and hotkey actions
> +=====================================
> +
> +ACPI notifications will generate ACPI netlink events and can be received using
> +userspace tools such as ``acpi_listen`` and ``acpid``.
> +
> +The Fn+F11 Performance mode hotkey will be handled by the driver; each keypress
> +will cycle to the next available platform profile.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3809931b9240..e74873a1e74b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20733,6 +20733,13 @@ L: linux-fbdev@...r.kernel.org
> S: Maintained
> F: drivers/video/fbdev/s3c-fb.c
>
> +SAMSUNG GALAXY BOOK EXTRAS DRIVER
> +M: Joshua Grisham <josh@...huagrisham.com>
> +L: platform-driver-x86@...r.kernel.org
> +S: Maintained
> +F: Documentation/admin-guide/laptops/samsung-galaxybook.rst
> +F: drivers/platform/x86/samsung-galaxybook.c
> +
> SAMSUNG INTERCONNECT DRIVERS
> M: Sylwester Nawrocki <s.nawrocki@...sung.com>
> M: Artur Świgoń <a.swigon@...sung.com>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 0258dd879d64..c77178e2640b 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -778,6 +778,23 @@ config BARCO_P50_GPIO
> To compile this driver as a module, choose M here: the module
> will be called barco-p50-gpio.
>
> +config SAMSUNG_GALAXYBOOK
> + tristate "Samsung Galaxy Book driver"
> + depends on ACPI
> + depends on ACPI_BATTERY
> + depends on INPUT
> + depends on LEDS_CLASS
> + depends on SERIO_I8042
> + select ACPI_PLATFORM_PROFILE
> + select FW_ATTR_CLASS
> + help
> + This is a driver for Samsung Galaxy Book series notebooks. It adds
> + support for the keyboard backlight control, performance mode control,
> + function keys, and various firmware attributes.
> +
> + For more information about this driver, see
> + <file:Documentation/admin-guide/laptops/samsung-galaxybook.rst>.
> +
> config SAMSUNG_LAPTOP
> tristate "Samsung Laptop driver"
> depends on RFKILL || RFKILL = n
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index e1b142947067..32ec4cb9d902 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -95,8 +95,9 @@ obj-$(CONFIG_PCENGINES_APU2) += pcengines-apuv2.o
> obj-$(CONFIG_BARCO_P50_GPIO) += barco-p50-gpio.o
>
> # Samsung
> -obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
> -obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
> +obj-$(CONFIG_SAMSUNG_GALAXYBOOK) += samsung-galaxybook.o
> +obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
> +obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
>
> # Toshiba
> obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
> diff --git a/drivers/platform/x86/samsung-galaxybook.c b/drivers/platform/x86/samsung-galaxybook.c
> new file mode 100644
> index 000000000000..44a96360469a
> --- /dev/null
> +++ b/drivers/platform/x86/samsung-galaxybook.c
> @@ -0,0 +1,1482 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Samsung Galaxy Book series extras driver
> + *
> + * Copyright (c) 2025 Joshua Grisham <josh@...huagrisham.com>
> + *
> + * With contributions to the SCAI ACPI device interface:
> + * Copyright (c) 2024 Giulio Girardi <giulio.girardi@...techgroup.it>
> + *
> + * Implementation inspired by existing x86 platform drivers.
> + * Thank you to the authors!
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/i8042.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_profile.h>
> +#include <linux/serio.h>
> +#include <linux/sysfs.h>
> +#include <linux/uuid.h>
> +#include <linux/workqueue.h>
> +#include <acpi/battery.h>
> +#include "firmware_attributes_class.h"
> +
> +#define DRIVER_NAME "samsung-galaxybook"
> +
> +struct samsung_galaxybook {
> + struct platform_device *platform;
> + struct acpi_device *acpi;
> +
> + const struct class *fw_attrs_class;
> + struct device *fw_attrs_dev;
> + struct kset *fw_attrs_kset;
> + /* block out of sync condition if firmware attributes are updated in multiple threads */
> + struct mutex fw_attr_lock;
> +
> + bool has_kbd_backlight;
> + bool has_block_recording;
> + bool has_performance_mode;
> +
> + struct led_classdev kbd_backlight;
> + struct work_struct kbd_backlight_hotkey_work;
> + /* block out of sync condition in hotkey action if brightness updated in another thread */
> + struct mutex kbd_backlight_lock;
> +
> + void *i8042_filter_ptr;
> +
> + struct work_struct block_recording_hotkey_work;
> + struct input_dev *camera_lens_cover_switch;
> +
> + struct acpi_battery_hook battery_hook;
> + struct device_attribute charge_control_end_threshold_attr;
> +
> + u8 profile_performance_modes[PLATFORM_PROFILE_LAST];
> + struct platform_profile_handler profile_handler;
> +};
> +
> +static struct samsung_galaxybook *galaxybook_ptr;
> +
> +enum galaxybook_fw_attr_id {
> + GB_ATTR_POWER_ON_LID_OPEN,
> + GB_ATTR_USB_CHARGING,
> + GB_ATTR_BLOCK_RECORDING,
> +};
> +
> +static const char * const galaxybook_fw_attr_name[] = {
> + [GB_ATTR_POWER_ON_LID_OPEN] = "power_on_lid_open",
> + [GB_ATTR_USB_CHARGING] = "usb_charging",
> + [GB_ATTR_BLOCK_RECORDING] = "block_recording",
> +};
> +
> +static const char * const galaxybook_fw_attr_desc[] = {
> + [GB_ATTR_POWER_ON_LID_OPEN] = "Power On Lid Open",
> + [GB_ATTR_USB_CHARGING] = "USB Charging",
> + [GB_ATTR_BLOCK_RECORDING] = "Block Recording",
> +};
> +
> +#define GB_ATTR_LANGUAGE_CODE "en_US.UTF-8"
> +
> +struct galaxybook_fw_attr {
> + struct samsung_galaxybook *galaxybook;
> + enum galaxybook_fw_attr_id fw_attr_id;
> + struct attribute_group attr_group;
> + struct kobj_attribute display_name;
> + struct kobj_attribute current_value;
> + int (*get_value)(struct samsung_galaxybook *galaxybook, bool *value);
> + int (*set_value)(struct samsung_galaxybook *galaxybook, const bool value);
> +};
> +
> +struct sawb {
> + u16 safn;
> + u16 sasb;
> + u8 rflg;
> + union {
> + struct {
> + u8 gunm;
> + u8 guds[250];
> + } __packed;
> + struct {
> + u8 caid[16];
> + u8 fncn;
> + u8 subn;
> + u8 iob0;
> + u8 iob1;
> + u8 iob2;
> + u8 iob3;
> + u8 iob4;
> + u8 iob5;
> + u8 iob6;
> + u8 iob7;
> + u8 iob8;
> + u8 iob9;
> + } __packed;
> + struct {
> + u8 iob_prefix[18];
> + u8 iob_values[10];
> + } __packed;
> + } __packed;
> +} __packed;
> +
> +#define GB_SAWB_LEN_SETTINGS 0x15
> +#define GB_SAWB_LEN_PERFORMANCE_MODE 0x100
> +
> +#define GB_SAFN 0x5843
> +
> +#define GB_SASB_KBD_BACKLIGHT 0x78
> +#define GB_SASB_POWER_MANAGEMENT 0x7a
> +#define GB_SASB_USB_CHARGING_GET 0x67
> +#define GB_SASB_USB_CHARGING_SET 0x68
> +#define GB_SASB_NOTIFICATIONS 0x86
> +#define GB_SASB_BLOCK_RECORDING 0x8a
> +#define GB_SASB_PERFORMANCE_MODE 0x91
> +
> +#define GB_SAWB_RFLG_POS 4
> +#define GB_SAWB_GB_GUNM_POS 5
> +
> +#define GB_RFLG_SUCCESS 0xaa
> +#define GB_GUNM_FAIL 0xff
> +
> +#define GB_GUNM_FEATURE_ENABLE 0xbb
> +#define GB_GUNM_FEATURE_ENABLE_SUCCESS 0xdd
> +#define GB_GUDS_FEATURE_ENABLE 0xaa
> +#define GB_GUDS_FEATURE_ENABLE_SUCCESS 0xcc
> +
> +#define GB_GUNM_GET 0x81
> +#define GB_GUNM_SET 0x82
> +
> +#define GB_GUNM_POWER_MANAGEMENT 0x82
> +
> +#define GB_GUNM_USB_CHARGING_GET 0x80
> +#define GB_GUNM_USB_CHARGING_ON 0x81
> +#define GB_GUNM_USB_CHARGING_OFF 0x80
> +#define GB_GUDS_POWER_ON_LID_OPEN 0xa3
> +#define GB_GUDS_POWER_ON_LID_OPEN_GET 0x81
> +#define GB_GUDS_POWER_ON_LID_OPEN_SET 0x80
> +#define GB_GUDS_BATTERY_CHARGE_CONTROL 0xe9
> +#define GB_GUDS_BATTERY_CHARGE_CONTROL_GET 0x91
> +#define GB_GUDS_BATTERY_CHARGE_CONTROL_SET 0x90
> +#define GB_GUNM_ACPI_NOTIFY_ENABLE 0x80
> +#define GB_GUDS_ACPI_NOTIFY_ENABLE 0x02
> +
> +#define GB_BLOCK_RECORDING_ON 0x0
> +#define GB_BLOCK_RECORDING_OFF 0x1
> +
> +#define GB_FNCN_PERFORMANCE_MODE 0x51
> +#define GB_SUBN_PERFORMANCE_MODE_LIST 0x01
> +#define GB_SUBN_PERFORMANCE_MODE_GET 0x02
> +#define GB_SUBN_PERFORMANCE_MODE_SET 0x03
> +
> +/* guid 8246028d-8bca-4a55-ba0f-6f1e6b921b8f */
> +static const guid_t performance_mode_guid =
> + GUID_INIT(0x8246028d, 0x8bca, 0x4a55, 0xba, 0x0f, 0x6f, 0x1e, 0x6b, 0x92, 0x1b, 0x8f);
> +#define GB_PERFORMANCE_MODE_GUID performance_mode_guid
> +
> +#define GB_PERFORMANCE_MODE_ULTRA 0x16
> +#define GB_PERFORMANCE_MODE_PERFORMANCE 0x15
> +#define GB_PERFORMANCE_MODE_SILENT 0xb
> +#define GB_PERFORMANCE_MODE_QUIET 0xa
> +#define GB_PERFORMANCE_MODE_OPTIMIZED 0x2
> +#define GB_PERFORMANCE_MODE_PERFORMANCE_LEGACY 0x1
> +#define GB_PERFORMANCE_MODE_OPTIMIZED_LEGACY 0x0
> +#define GB_PERFORMANCE_MODE_UNKNOWN 0xff
> +
> +#define GB_ACPI_METHOD_ENABLE "SDLS"
> +#define GB_ACPI_METHOD_ENABLE_ON 1
> +#define GB_ACPI_METHOD_ENABLE_OFF 0
> +#define GB_ACPI_METHOD_SETTINGS "CSFI"
> +#define GB_ACPI_METHOD_PERFORMANCE_MODE "CSXI"
> +
> +#define GB_KBD_BACKLIGHT_MAX_BRIGHTNESS 3
> +
> +#define GB_ACPI_NOTIFY_BATTERY_STATE_CHANGED 0x61
> +#define GB_ACPI_NOTIFY_DEVICE_ON_TABLE 0x6c
> +#define GB_ACPI_NOTIFY_DEVICE_OFF_TABLE 0x6d
> +#define GB_ACPI_NOTIFY_HOTKEY_PERFORMANCE_MODE 0x70
> +
> +#define GB_KEY_KBD_BACKLIGHT_KEYDOWN 0x2c
> +#define GB_KEY_KBD_BACKLIGHT_KEYUP 0xac
> +#define GB_KEY_BLOCK_RECORDING_KEYDOWN 0x1f
> +#define GB_KEY_BLOCK_RECORDING_KEYUP 0x9f
> +#define GB_KEY_BATTERY_NOTIFY_KEYUP 0xf
> +#define GB_KEY_BATTERY_NOTIFY_KEYDOWN 0x8f
> +
> +/*
> + * ACPI method handling
> + */
> +
> +static int galaxybook_acpi_method(struct samsung_galaxybook *galaxybook, acpi_string method,
> + struct sawb *buf, size_t len)
> +{
> + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
> + union acpi_object in_obj, *out_obj;
> + struct acpi_object_list input;
> + acpi_status status;
> + int err;
> +
> + in_obj.type = ACPI_TYPE_BUFFER;
> + in_obj.buffer.length = len;
> + in_obj.buffer.pointer = (u8 *)buf;
> +
> + input.count = 1;
> + input.pointer = &in_obj;
> +
> + status = acpi_evaluate_object_typed(galaxybook->acpi->handle, method, &input, &output,
> + ACPI_TYPE_BUFFER);
> +
> + if (ACPI_FAILURE(status)) {
> + dev_err(&galaxybook->acpi->dev, "failed to execute method %s; got %s\n",
> + method, acpi_format_exception(status));
> + return -EIO;
> + }
> +
> + out_obj = output.pointer;
> +
> + if (out_obj->buffer.length != len || out_obj->buffer.length < GB_SAWB_GB_GUNM_POS + 1) {
> + dev_err(&galaxybook->acpi->dev, "failed to execute method %s; "
> + "response length mismatch\n", method);
> + err = -EPROTO;
> + goto out_free;
> + }
> + if (out_obj->buffer.pointer[GB_SAWB_RFLG_POS] != GB_RFLG_SUCCESS) {
> + dev_err(&galaxybook->acpi->dev, "failed to execute method %s; "
> + "device did not respond with success code 0x%x\n",
> + method, GB_RFLG_SUCCESS);
> + err = -ENXIO;
> + goto out_free;
> + }
> + if (out_obj->buffer.pointer[GB_SAWB_GB_GUNM_POS] == GB_GUNM_FAIL) {
> + dev_err(&galaxybook->acpi->dev,
> + "failed to execute method %s; device responded with failure code 0x%x\n",
> + method, GB_GUNM_FAIL);
> + err = -ENXIO;
> + goto out_free;
> + }
> +
> + memcpy(buf, out_obj->buffer.pointer, len);
> + err = 0;
> +
> +out_free:
> + kfree(out_obj);
> + return err;
> +}
> +
> +static int galaxybook_enable_acpi_feature(struct samsung_galaxybook *galaxybook, const u16 sasb)
> +{
> + struct sawb buf = { 0 };
No need to have literal 0 in these, {} is enough to initialize.
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = sasb;
> + buf.gunm = GB_GUNM_FEATURE_ENABLE;
> + buf.guds[0] = GB_GUDS_FEATURE_ENABLE;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + if (buf.gunm != GB_GUNM_FEATURE_ENABLE_SUCCESS &&
> + buf.guds[0] != GB_GUDS_FEATURE_ENABLE_SUCCESS)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +/*
> + * Keyboard Backlight
> + */
> +
> +static int kbd_backlight_acpi_set(struct samsung_galaxybook *galaxybook,
> + const enum led_brightness brightness)
> +{
> + struct sawb buf = { 0 };
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_KBD_BACKLIGHT;
> + buf.gunm = GB_GUNM_SET;
> +
> + buf.guds[0] = brightness;
> +
> + return galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> +}
> +
> +static int kbd_backlight_acpi_get(struct samsung_galaxybook *galaxybook,
> + enum led_brightness *brightness)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_KBD_BACKLIGHT;
> + buf.gunm = GB_GUNM_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + *brightness = buf.gunm;
> +
> + return 0;
> +}
> +
> +static int kbd_backlight_store(struct led_classdev *led,
> + const enum led_brightness brightness)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of_const(led, struct samsung_galaxybook, kbd_backlight);
> +
> + return kbd_backlight_acpi_set(galaxybook, brightness);
> +}
> +
> +static enum led_brightness kbd_backlight_show(struct led_classdev *led)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(led, struct samsung_galaxybook, kbd_backlight);
> + enum led_brightness brightness;
> + int err;
> +
> + err = kbd_backlight_acpi_get(galaxybook, &brightness);
> + if (err)
> + return err;
> +
> + return brightness;
> +}
> +
> +static int galaxybook_kbd_backlight_init(struct samsung_galaxybook *galaxybook)
> +{
> + struct led_init_data init_data = {};
> + enum led_brightness brightness;
> + int err;
> +
> + err = devm_mutex_init(&galaxybook->platform->dev, &galaxybook->kbd_backlight_lock);
> + if (err)
> + return err;
> +
> + err = galaxybook_enable_acpi_feature(galaxybook, GB_SASB_KBD_BACKLIGHT);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to enable kbd_backlight feature, error %d\n", err);
> + return 0;
> + }
> +
> + /* verify we can read the value, otherwise stop without setting has_kbd_backlight */
> + err = kbd_backlight_acpi_get(galaxybook, &brightness);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to get initial kbd_backlight brightness, error %d\n", err);
> + return 0;
> + }
> +
> + init_data.devicename = DRIVER_NAME;
> + init_data.default_label = ":" LED_FUNCTION_KBD_BACKLIGHT;
> + init_data.devname_mandatory = true;
> +
> + galaxybook->kbd_backlight.brightness_get = kbd_backlight_show;
> + galaxybook->kbd_backlight.brightness_set_blocking = kbd_backlight_store;
> + galaxybook->kbd_backlight.flags = LED_BRIGHT_HW_CHANGED;
> + galaxybook->kbd_backlight.max_brightness = GB_KBD_BACKLIGHT_MAX_BRIGHTNESS;
> +
> + err = devm_led_classdev_register_ext(&galaxybook->platform->dev,
> + &galaxybook->kbd_backlight, &init_data);
> + if (err)
> + return err;
> +
> + galaxybook->has_kbd_backlight = true;
> +
> + return 0;
> +}
> +
> +/*
> + * Battery Extension (adds charge_control_end_threshold to the battery device)
> + */
> +
> +static int charge_control_end_threshold_acpi_set(struct samsung_galaxybook *galaxybook, u8 value)
> +{
> + struct sawb buf = { 0 };
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_POWER_MANAGEMENT;
> + buf.gunm = GB_GUNM_POWER_MANAGEMENT;
> + buf.guds[0] = GB_GUDS_BATTERY_CHARGE_CONTROL;
> + buf.guds[1] = GB_GUDS_BATTERY_CHARGE_CONTROL_SET;
> + buf.guds[2] = value;
> +
> + return galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> +}
> +
> +static int charge_control_end_threshold_acpi_get(struct samsung_galaxybook *galaxybook, u8 *value)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_POWER_MANAGEMENT;
> + buf.gunm = GB_GUNM_POWER_MANAGEMENT;
> + buf.guds[0] = GB_GUDS_BATTERY_CHARGE_CONTROL;
> + buf.guds[1] = GB_GUDS_BATTERY_CHARGE_CONTROL_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + *value = buf.guds[1];
> +
> + return 0;
> +}
> +
> +static ssize_t charge_control_end_threshold_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(attr, struct samsung_galaxybook, charge_control_end_threshold_attr);
> + u8 value;
> + int err;
> +
> + if (!count)
> + return -EINVAL;
> +
> + err = kstrtou8(buf, 0, &value);
> + if (err)
> + return err;
> +
> + if (value < 1 || value > 100)
> + return -EINVAL;
> +
> + /* device stores "no end threshold" as 0 instead of 100; if setting to 100, send 0 */
> + if (value == 100)
> + value = 0;
> +
> + err = charge_control_end_threshold_acpi_set(galaxybook, value);
> + if (err)
> + return err;
> +
> + return count;
> +}
> +
> +static ssize_t charge_control_end_threshold_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(attr, struct samsung_galaxybook, charge_control_end_threshold_attr);
> + u8 value;
> + int err;
> +
> + err = charge_control_end_threshold_acpi_get(galaxybook, &value);
> + if (err)
> + return err;
> +
> + /* device stores "no end threshold" as 0 instead of 100; if device has 0, report 100 */
> + if (value == 0)
> + value = 100;
> +
> + return sysfs_emit(buf, "%u\n", value);
> +}
> +
> +static int galaxybook_battery_add(struct power_supply *battery, struct acpi_battery_hook *hook)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(hook, struct samsung_galaxybook, battery_hook);
> +
> + return device_create_file(&battery->dev, &galaxybook->charge_control_end_threshold_attr);
> +}
> +
> +static int galaxybook_battery_remove(struct power_supply *battery, struct acpi_battery_hook *hook)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(hook, struct samsung_galaxybook, battery_hook);
> +
> + device_remove_file(&battery->dev, &galaxybook->charge_control_end_threshold_attr);
> + return 0;
> +}
> +
> +static int galaxybook_battery_threshold_init(struct samsung_galaxybook *galaxybook)
> +{
> + struct acpi_battery_hook *hook;
> + struct device_attribute *attr;
> + u8 value;
> + int err;
> +
> + err = charge_control_end_threshold_acpi_get(galaxybook, &value);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to get initial battery charge end threshold, error %d\n", err);
> + return 0;
> + }
> +
> + hook = &galaxybook->battery_hook;
> + hook->add_battery = galaxybook_battery_add;
> + hook->remove_battery = galaxybook_battery_remove;
> + hook->name = "Samsung Galaxy Book Battery Extension";
> +
> + attr = &galaxybook->charge_control_end_threshold_attr;
> + sysfs_attr_init(&attr->attr);
> + attr->attr.name = "charge_control_end_threshold";
> + attr->attr.mode = 0644;
> + attr->show = charge_control_end_threshold_show;
> + attr->store = charge_control_end_threshold_store;
> +
> + return devm_battery_hook_register(&galaxybook->platform->dev, &galaxybook->battery_hook);
> +}
> +
> +/*
> + * Platform Profile / Performance mode
> + */
> +
> +static int performance_mode_acpi_set(struct samsung_galaxybook *galaxybook,
> + const u8 performance_mode)
> +{
> + struct sawb buf = { 0 };
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_PERFORMANCE_MODE;
> + export_guid(buf.caid, &GB_PERFORMANCE_MODE_GUID);
> + buf.fncn = GB_FNCN_PERFORMANCE_MODE;
> + buf.subn = GB_SUBN_PERFORMANCE_MODE_SET;
> + buf.iob0 = performance_mode;
> +
> + return galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_PERFORMANCE_MODE,
> + &buf, GB_SAWB_LEN_PERFORMANCE_MODE);
> +}
> +
> +static int performance_mode_acpi_get(struct samsung_galaxybook *galaxybook, u8 *performance_mode)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_PERFORMANCE_MODE;
> + export_guid(buf.caid, &GB_PERFORMANCE_MODE_GUID);
> + buf.fncn = GB_FNCN_PERFORMANCE_MODE;
> + buf.subn = GB_SUBN_PERFORMANCE_MODE_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_PERFORMANCE_MODE,
> + &buf, GB_SAWB_LEN_PERFORMANCE_MODE);
> + if (err)
> + return err;
> +
> + *performance_mode = buf.iob0;
> +
> + return 0;
> +}
> +
> +static int get_performance_mode_profile(struct samsung_galaxybook *galaxybook,
> + const u8 performance_mode,
> + enum platform_profile_option *profile)
> +{
> + for (int i = 0; i < PLATFORM_PROFILE_LAST; i++) {
unsigned int is preferred for loop variables that never should become
negative.
> + if (galaxybook->profile_performance_modes[i] == performance_mode) {
> + if (profile)
> + *profile = i;
> + return 0;
> + }
> + }
> +
> + return -ENODATA;
> +}
> +
> +static int galaxybook_platform_profile_set(struct platform_profile_handler *pprof,
> + enum platform_profile_option profile)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(pprof, struct samsung_galaxybook, profile_handler);
> +
> + return performance_mode_acpi_set(galaxybook,
> + galaxybook->profile_performance_modes[profile]);
> +}
> +
> +static int galaxybook_platform_profile_get(struct platform_profile_handler *pprof,
> + enum platform_profile_option *profile)
> +{
> + struct samsung_galaxybook *galaxybook =
> + container_of(pprof, struct samsung_galaxybook, profile_handler);
> + u8 performance_mode;
> + int err;
> +
> + err = performance_mode_acpi_get(galaxybook, &performance_mode);
> + if (err)
> + return err;
> +
> + return get_performance_mode_profile(galaxybook, performance_mode, profile);
> +}
> +
> +static void galaxybook_set_profile_choice(struct samsung_galaxybook *galaxybook,
> + enum platform_profile_option profile, const u8 value)
> +{
> + galaxybook->profile_performance_modes[profile] = value;
> + set_bit(profile, galaxybook->profile_handler.choices);
> + dev_dbg(&galaxybook->platform->dev, "profile %d is now mapped to performance mode 0x%x\n",
> + profile, value);
> +}
> +
> +static int galaxybook_profile_init(struct samsung_galaxybook *galaxybook)
> +{
> + u8 init_performance_mode = GB_PERFORMANCE_MODE_UNKNOWN;
> + u8 performance_mode = GB_PERFORMANCE_MODE_UNKNOWN;
> + struct sawb buf = { 0 };
> + int num_mapped = 0;
> + int err;
> + int i;
> +
> + /* fetch supported performance mode values from ACPI method */
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_PERFORMANCE_MODE;
> + export_guid(buf.caid, &GB_PERFORMANCE_MODE_GUID);
> + buf.fncn = GB_FNCN_PERFORMANCE_MODE;
> + buf.subn = GB_SUBN_PERFORMANCE_MODE_LIST;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_PERFORMANCE_MODE,
> + &buf, GB_SAWB_LEN_PERFORMANCE_MODE);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to get supported performance modes, error %d\n", err);
> + return 0;
> + }
> +
> + /* set up profile_performance_modes with "unknown" as init value */
> + for (i = 0; i < PLATFORM_PROFILE_LAST; i++)
> + galaxybook->profile_performance_modes[i] = GB_PERFORMANCE_MODE_UNKNOWN;
> +
> + /*
> + * Value returned in iob0 will have the number of supported performance modes per device.
> + * The performance mode values will then be given as a list after this (iob1-iobX).
> + * Loop through the values and assign to the appropriate platform_profile_option,
> + * overriding "legacy" values along the way if a non-legacy value exists.
Please fold any comments to 80 chars.
(Code can exceed 80 chars when it makes sense/results in cleaner code.)
> + */
> + for (i = 1; i <= buf.iob0; i++) {
> + switch (buf.iob_values[i]) {
> + case GB_PERFORMANCE_MODE_SILENT:
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_LOW_POWER,
> + buf.iob_values[i]);
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_QUIET:
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_QUIET,
> + buf.iob_values[i]);
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_OPTIMIZED_LEGACY:
> + if (galaxybook->profile_performance_modes[PLATFORM_PROFILE_BALANCED] !=
> + GB_PERFORMANCE_MODE_UNKNOWN)
> + break;
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_BALANCED,
> + buf.iob_values[i]);
> + init_performance_mode = buf.iob_values[i];
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_OPTIMIZED:
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_BALANCED,
> + buf.iob_values[i]);
> + init_performance_mode = buf.iob_values[i];
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_PERFORMANCE_LEGACY:
> + if (galaxybook->profile_performance_modes[PLATFORM_PROFILE_PERFORMANCE] !=
> + GB_PERFORMANCE_MODE_UNKNOWN)
> + break;
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_PERFORMANCE,
> + buf.iob_values[i]);
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_PERFORMANCE:
> + /* if ultra is already mapped, map to balanced-performance */
> + if (galaxybook->profile_performance_modes[PLATFORM_PROFILE_PERFORMANCE] ==
> + GB_PERFORMANCE_MODE_ULTRA)
> + galaxybook_set_profile_choice(galaxybook,
> + PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> + buf.iob_values[i]);
> + else
> + galaxybook_set_profile_choice(galaxybook,
> + PLATFORM_PROFILE_PERFORMANCE,
> + buf.iob_values[i]);
> + num_mapped++;
> + break;
> +
> + case GB_PERFORMANCE_MODE_ULTRA:
> + /* if ultra is supported, downgrade performance to balanced-performance */
> + performance_mode =
> + galaxybook->profile_performance_modes[PLATFORM_PROFILE_PERFORMANCE];
> + galaxybook_set_profile_choice(galaxybook,
> + PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> + performance_mode);
> + galaxybook_set_profile_choice(galaxybook, PLATFORM_PROFILE_PERFORMANCE,
> + buf.iob_values[i]);
> + num_mapped++;
> + break;
> +
> + default:
> + dev_dbg(&galaxybook->platform->dev,
> + "unmapped performance mode 0x%x will be ignored\n",
> + buf.iob_values[i]);
> + break;
> + }
> + }
> +
> + if (num_mapped == 0) {
> + dev_dbg(&galaxybook->platform->dev, "failed to map any performance modes\n");
> + return 0;
Should this return error instead? I assume it's because you want to
initialize with part of the features only but...
> + }
> +
> + err = performance_mode_acpi_get(galaxybook, &performance_mode);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to get initial performance mode, error %d\n", err);
> + return 0;
> + }
> +
> + /* if startup performance_mode fails to match a profile, try to set init mode */
> + err = get_performance_mode_profile(galaxybook, performance_mode, NULL);
> + if (err) {
> + if (init_performance_mode == GB_PERFORMANCE_MODE_UNKNOWN) {
> + dev_err(&galaxybook->platform->dev, "missing initial performance mode\n");
> + return -ENODATA;
> + }
> + err = performance_mode_acpi_set(galaxybook, init_performance_mode);
> + if (err) {
> + dev_err(&galaxybook->platform->dev,
> + "failed to set initial performance mode 0x%x\n",
> + init_performance_mode);
> + return err;
...why these two cases then result in failing everything vs. just platform
profile feature? Not an end of the world but it feels inconsistent to me.
> + }
> + }
> +
> + galaxybook->profile_handler.name = DRIVER_NAME;
> + galaxybook->profile_handler.dev = &galaxybook->platform->dev;
> + galaxybook->profile_handler.profile_get = galaxybook_platform_profile_get;
> + galaxybook->profile_handler.profile_set = galaxybook_platform_profile_set;
> +
> + err = devm_platform_profile_register(&galaxybook->profile_handler);
> + if (err)
> + return err;
> +
> + galaxybook->has_performance_mode = true;
> +
> + return 0;
> +}
> +
> +/*
> + * Firmware Attributes
> + */
> +
> +/* Power on lid open (device should power on when lid is opened) */
> +
> +static int power_on_lid_open_acpi_set(struct samsung_galaxybook *galaxybook, const bool value)
> +{
> + struct sawb buf = { 0 };
> +
> + lockdep_assert_held(&galaxybook->fw_attr_lock);
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_POWER_MANAGEMENT;
> + buf.gunm = GB_GUNM_POWER_MANAGEMENT;
> + buf.guds[0] = GB_GUDS_POWER_ON_LID_OPEN;
> + buf.guds[1] = GB_GUDS_POWER_ON_LID_OPEN_SET;
> + buf.guds[2] = value ? 1 : 0;
> +
> + return galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> +}
> +
> +static int power_on_lid_open_acpi_get(struct samsung_galaxybook *galaxybook, bool *value)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_POWER_MANAGEMENT;
> + buf.gunm = GB_GUNM_POWER_MANAGEMENT;
> + buf.guds[0] = GB_GUDS_POWER_ON_LID_OPEN;
> + buf.guds[1] = GB_GUDS_POWER_ON_LID_OPEN_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + *value = buf.guds[1];
> +
> + return 0;
> +}
> +
> +/* USB Charging (USB ports can charge other devices even when device is powered off) */
> +
> +static int usb_charging_acpi_set(struct samsung_galaxybook *galaxybook, const bool value)
> +{
> + struct sawb buf = { 0 };
> +
> + lockdep_assert_held(&galaxybook->fw_attr_lock);
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_USB_CHARGING_SET;
> + buf.gunm = value ? GB_GUNM_USB_CHARGING_ON : GB_GUNM_USB_CHARGING_OFF;
> +
> + return galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> +}
> +
> +static int usb_charging_acpi_get(struct samsung_galaxybook *galaxybook, bool *value)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_USB_CHARGING_GET;
> + buf.gunm = GB_GUNM_USB_CHARGING_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + *value = buf.gunm == 1;
> +
> + return 0;
> +}
> +
> +/* Block recording (blocks access to camera and microphone) */
> +
> +static int block_recording_acpi_set(struct samsung_galaxybook *galaxybook, const bool value)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + lockdep_assert_held(&galaxybook->fw_attr_lock);
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_BLOCK_RECORDING;
> + buf.gunm = GB_GUNM_SET;
> + buf.guds[0] = value ? GB_BLOCK_RECORDING_ON : GB_BLOCK_RECORDING_OFF;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + input_report_switch(galaxybook->camera_lens_cover_switch,
> + SW_CAMERA_LENS_COVER, value ? 1 : 0);
> + input_sync(galaxybook->camera_lens_cover_switch);
> +
> + return 0;
> +}
> +
> +static int block_recording_acpi_get(struct samsung_galaxybook *galaxybook, bool *value)
> +{
> + struct sawb buf = { 0 };
> + int err;
> +
> + buf.safn = GB_SAFN;
> + buf.sasb = GB_SASB_BLOCK_RECORDING;
> + buf.gunm = GB_GUNM_GET;
> +
> + err = galaxybook_acpi_method(galaxybook, GB_ACPI_METHOD_SETTINGS,
> + &buf, GB_SAWB_LEN_SETTINGS);
> + if (err)
> + return err;
> +
> + *value = buf.gunm == GB_BLOCK_RECORDING_ON;
> +
> + return 0;
> +}
> +
> +static int galaxybook_block_recording_init(struct samsung_galaxybook *galaxybook)
> +{
> + bool value;
> + int err;
> +
> + err = galaxybook_enable_acpi_feature(galaxybook, GB_SASB_BLOCK_RECORDING);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to initialize block_recording, error %d\n", err);
> + return 0;
> + }
> +
> + guard(mutex)(&galaxybook->fw_attr_lock);
> +
> + err = block_recording_acpi_get(galaxybook, &value);
> + if (err) {
> + dev_dbg(&galaxybook->platform->dev,
> + "failed to get initial block_recording state, error %d\n", err);
> + return 0;
> + }
> +
> + galaxybook->camera_lens_cover_switch =
> + devm_input_allocate_device(&galaxybook->platform->dev);
> + if (!galaxybook->camera_lens_cover_switch)
> + return -ENOMEM;
> +
> + galaxybook->camera_lens_cover_switch->name = "Samsung Galaxy Book Camera Lens Cover";
> + galaxybook->camera_lens_cover_switch->phys = DRIVER_NAME "/input0";
> + galaxybook->camera_lens_cover_switch->id.bustype = BUS_HOST;
> +
> + input_set_capability(galaxybook->camera_lens_cover_switch, EV_SW, SW_CAMERA_LENS_COVER);
> +
> + err = input_register_device(galaxybook->camera_lens_cover_switch);
> + if (err)
> + return err;
> +
> + input_report_switch(galaxybook->camera_lens_cover_switch,
> + SW_CAMERA_LENS_COVER, value ? 1 : 0);
> + input_sync(galaxybook->camera_lens_cover_switch);
> +
> + galaxybook->has_block_recording = true;
> +
> + return 0;
> +}
> +
> +/* Firmware Attributes setup */
> +
> +static ssize_t type_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + return sysfs_emit(buf, "enumeration\n");
> +}
> +
> +static struct kobj_attribute fw_attr_type = __ATTR_RO(type);
> +
> +static ssize_t default_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + return sysfs_emit(buf, "0\n");
> +}
> +
> +static struct kobj_attribute fw_attr_default_value = __ATTR_RO(default_value);
> +
> +static ssize_t possible_values_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + return sysfs_emit(buf, "0;1\n");
> +}
> +
> +static struct kobj_attribute fw_attr_possible_values = __ATTR_RO(possible_values);
> +
> +static ssize_t display_name_language_code_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sysfs_emit(buf, "%s\n", GB_ATTR_LANGUAGE_CODE);
> +}
> +
> +static struct kobj_attribute fw_attr_display_name_language_code =
> + __ATTR_RO(display_name_language_code);
> +
> +static ssize_t display_name_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + struct galaxybook_fw_attr *fw_attr =
> + container_of(attr, struct galaxybook_fw_attr, display_name);
> +
> + return sysfs_emit(buf, "%s\n", galaxybook_fw_attr_desc[fw_attr->fw_attr_id]);
> +}
> +
> +static ssize_t current_value_store(struct kobject *kobj, struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct galaxybook_fw_attr *fw_attr =
> + container_of(attr, struct galaxybook_fw_attr, current_value);
> + struct samsung_galaxybook *galaxybook = fw_attr->galaxybook;
> +
> + bool value;
Remove the extra empty line from within variable declarations.
> + int err;
> +
> + if (!count)
> + return -EINVAL;
> +
> + err = kstrtobool(buf, &value);
> + if (err)
> + return err;
> +
> + guard(mutex)(&galaxybook->fw_attr_lock);
> +
> + err = fw_attr->set_value(galaxybook, value);
> + if (err)
> + return err;
> +
> + return count;
> +}
--
i.
Powered by blists - more mailing lists