linux-kernel - [PATCH net-next 2/2] net: phy: dp83822: Add support for changing the transmit amplitude voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250113-dp83822-tx-swing-v1-2-7ed5a9d80010@liebherr.com>
Date: Mon, 13 Jan 2025 06:40:13 +0100
From: Dimitri Fedrau via B4 Relay <devnull+dimitri.fedrau.liebherr.com@...nel.org>
To: Andrew Lunn <andrew+netdev@...n.ch>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Andrew Davis <afd@...com>, 
 Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, 
 Russell King <linux@...linux.org.uk>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Dimitri Fedrau <dimitri.fedrau@...bherr.com>, 
 Dimitri Fedrau <dima.fedrau@...il.com>
Subject: [PATCH net-next 2/2] net: phy: dp83822: Add support for changing
 the transmit amplitude voltage

From: Dimitri Fedrau <dimitri.fedrau@...bherr.com>

Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Add support for configuration via DT.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@...bherr.com>
---
 drivers/net/phy/dp83822.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 4262bc31503b20640f19596449325d8a5938e20c..cc2ee9add648bc5f72dd92c7813ceec5e4b6db53 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -31,6 +31,7 @@
 #define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
 #define MII_DP83822_MLEDCR	0x25
+#define MII_DP83822_LDCTRL	0x403
 #define MII_DP83822_LEDCFG1	0x460
 #define MII_DP83822_IOCTRL1	0x462
 #define MII_DP83822_IOCTRL2	0x463
@@ -123,6 +124,9 @@
 #define DP83822_IOCTRL1_GPIO1_CTRL		GENMASK(2, 0)
 #define DP83822_IOCTRL1_GPIO1_CTRL_LED_1	BIT(0)
 
+/* LDCTRL bits */
+#define DP83822_100BASE_TX_LINE_DRIVER_SWING	GENMASK(7, 4)
+
 /* IOCTRL2 bits */
 #define DP83822_IOCTRL2_GPIO2_CLK_SRC		GENMASK(6, 4)
 #define DP83822_IOCTRL2_GPIO2_CTRL		GENMASK(2, 0)
@@ -197,6 +201,12 @@ struct dp83822_private {
 	bool set_gpio2_clk_out;
 	u32 gpio2_clk_out;
 	bool led_pin_enable[DP83822_MAX_LED_PINS];
+	int tx_amplitude_100base_tx_index;
+};
+
+static const u32 tx_amplitude_100base_tx[] = {
+	1600, 1633, 1667, 1700, 1733, 1767, 1800, 1833,
+	1867, 1900, 1933, 1967, 2000, 2033, 2067, 2100,
 };
 
 static int dp83822_config_wol(struct phy_device *phydev,
@@ -522,6 +532,12 @@ static int dp83822_config_init(struct phy_device *phydev)
 			       FIELD_PREP(DP83822_IOCTRL2_GPIO2_CLK_SRC,
 					  dp83822->gpio2_clk_out));
 
+	if (dp83822->tx_amplitude_100base_tx_index >= 0)
+		phy_modify_mmd(phydev, MDIO_MMD_VEND2, MII_DP83822_LDCTRL,
+			       DP83822_100BASE_TX_LINE_DRIVER_SWING,
+			       FIELD_PREP(DP83822_100BASE_TX_LINE_DRIVER_SWING,
+					  dp83822->tx_amplitude_100base_tx_index));
+
 	err = dp83822_config_init_leds(phydev);
 	if (err)
 		return err;
@@ -780,6 +796,8 @@ static int dp83822_of_init(struct phy_device *phydev)
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
 	const char *of_val;
+	u32 val;
+	int i;
 
 	/* Signal detection for the PHY is only enabled if the FX_EN and the
 	 * SD_EN pins are strapped. Signal detection can only enabled if FX_EN
@@ -815,6 +833,23 @@ static int dp83822_of_init(struct phy_device *phydev)
 		dp83822->set_gpio2_clk_out = true;
 	}
 
+	dp83822->tx_amplitude_100base_tx_index = -1;
+	if (!device_property_read_u32(dev, "ti,tx-amplitude-100base-tx-millivolt", &val)) {
+		for (i = 0; i < ARRAY_SIZE(tx_amplitude_100base_tx); i++) {
+			if (tx_amplitude_100base_tx[i] == val) {
+				dp83822->tx_amplitude_100base_tx_index = i;
+				break;
+			}
+		}
+
+		if (dp83822->tx_amplitude_100base_tx_index < 0) {
+			phydev_err(phydev,
+				   "Invalid value for ti,tx-amplitude-100base-tx-millivolt property (%u)\n",
+				   val);
+			return -EINVAL;
+		}
+	}
+
 	return dp83822_of_init_leds(phydev);
 }
 

-- 
2.39.5