[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250113-sm8750_ufs_master-v1-4-b3774120eb8c@quicinc.com>
Date: Mon, 13 Jan 2025 13:46:27 -0800
From: Melody Olvera <quic_molvera@...cinc.com>
To: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam
<manivannan.sadhasivam@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>,
Bjorn Andersson <andersson@...nel.org>, Andy Gross <agross@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Satya Durga Srinivasu Prabhala
<quic_satyap@...cinc.com>,
Trilok Soni <quic_tsoni@...cinc.com>
CC: <linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-scsi@...r.kernel.org>, Melody Olvera <quic_molvera@...cinc.com>,
"Nitin Rawat" <quic_nitirawa@...cinc.com>,
Manish Pandey
<quic_mapa@...cinc.com>
Subject: [PATCH 4/5] arm64: dts: qcom: sm8750: Add UFS nodes for SM8750 SoC
From: Nitin Rawat <quic_nitirawa@...cinc.com>
Add UFS host controller and PHY nodes for SM8750 SoC.
Co-developed-by: Manish Pandey <quic_mapa@...cinc.com>
Signed-off-by: Manish Pandey <quic_mapa@...cinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 81 ++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 3bbd7d18598ee0a3a0d5130c03a3166e1fc14d82..20690c102244b337847a6482dd83c37e19746de9 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
interrupt-parent = <&intc>;
@@ -1939,6 +1940,86 @@ mmss_noc: interconnect@...0000 {
#interconnect-cells = <2>;
};
+ ufs_mem_phy: phy@...0000 {
+ compatible = "qcom,sm8750-qmp-ufs-phy";
+ reg = <0x0 0x01d80000 0x0 0x2000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&tcsrcc TCSR_UFS_CLKREF_EN>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@...4000 {
+ compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_LN_BB_CLK3>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <100000000 403000000>,
+ <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x60 0>;
+ dma-coherent;
+
+ lanes-per-direction = <2>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@...0000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x20000>;
--
2.46.1
Powered by blists - more mailing lists