[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250116125726.2549489-1-h-salunke@ti.com>
Date: Thu, 16 Jan 2025 18:27:26 +0530
From: Hrushikesh Salunke <h-salunke@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <r-gunasekaran@...com>,
<rogerq@...nel.org>, <s-vadapalli@...com>
CC: <h-salunke@...com>, <srk@...com>, <danishanwar@...com>,
<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C
J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on
the EVM as a stacked USB connector which has one Type-A and one Type-C
port. These Type-A and Type-C ports are connected to MUX so only
one of them can be enabled at a time.
Commit under Fixes, tries to enable the USB0 instance of USB to
interface with the Type-C port via the USB hub, by configuring the
USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM
that Type-A port is enabled instead of Type-C port.
Fix this by setting USB2.0_MUX_SEL to GPIO_ACTIVE_LOW to enable Type-C
port.
Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Hrushikesh Salunke <h-salunke@...com>
---
This patch is based on commit
619f0b6fad52 Merge tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index a00f4a7d20d9..a11daa447f3d 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -495,7 +495,7 @@ exp1: gpio@23 {
p05-hog {
/* P05 - USB2.0_MUX_SEL */
gpio-hog;
- gpios = <5 GPIO_ACTIVE_HIGH>;
+ gpios = <5 GPIO_ACTIVE_LOW>;
output-high;
};
--
2.34.1
Powered by blists - more mailing lists