| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3d9db530-a0b7-4f18-9ad4-233356dfe68c@nvidia.com>
Date: Thu, 16 Jan 2025 15:01:43 +0000
From: Jon Hunter <jonathanh@...dia.com>
To: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>
Cc: 胡连勤 <hulianqin@...o.com>,
Prashanth K <quic_prashk@...cinc.com>, "mwalle@...nel.org"
<mwalle@...nel.org>, "quic_jjohnson@...cinc.com"
<quic_jjohnson@...cinc.com>, David Brownell
<dbrownell@...rs.sourceforge.net>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"opensource.kernel" <opensource.kernel@...o.com>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
Brad Griffis <bgriffis@...dia.com>
Subject: Re: [PATCH v3] usb: gadget: u_serial: Disable ep before setting port
to null to fix the crash caused by port being null
On 16/01/2025 13:28, gregkh@...uxfoundation.org wrote:
> On Thu, Jan 16, 2025 at 01:11:36PM +0000, Jon Hunter wrote:
>> Hi Greg, Lianqin,
>>
>> On 17/12/2024 07:58, 胡连勤 wrote:
>>> From: Lianqin Hu <hulianqin@...o.com>
>>>
>>> Considering that in some extreme cases, when performing the
>>> unbinding operation, gserial_disconnect has cleared gser->ioport,
>>> which triggers gadget reconfiguration, and then calls gs_read_complete,
>>> resulting in access to a null pointer. Therefore, ep is disabled before
>>> gserial_disconnect sets port to null to prevent this from happening.
>>>
>>> Call trace:
>>> gs_read_complete+0x58/0x240
>>> usb_gadget_giveback_request+0x40/0x160
>>> dwc3_remove_requests+0x170/0x484
>>> dwc3_ep0_out_start+0xb0/0x1d4
>>> __dwc3_gadget_start+0x25c/0x720
>>> kretprobe_trampoline.cfi_jt+0x0/0x8
>>> kretprobe_trampoline.cfi_jt+0x0/0x8
>>> udc_bind_to_driver+0x1d8/0x300
>>> usb_gadget_probe_driver+0xa8/0x1dc
>>> gadget_dev_desc_UDC_store+0x13c/0x188
>>> configfs_write_iter+0x160/0x1f4
>>> vfs_write+0x2d0/0x40c
>>> ksys_write+0x7c/0xf0
>>> __arm64_sys_write+0x20/0x30
>>> invoke_syscall+0x60/0x150
>>> el0_svc_common+0x8c/0xf8
>>> do_el0_svc+0x28/0xa0
>>> el0_svc+0x24/0x84
>>>
>>> Fixes: c1dca562be8a ("usb gadget: split out serial core")
>>> Cc: stable@...r.kernel.org
>>> Suggested-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
>>> Signed-off-by: Lianqin Hu <hulianqin@...o.com>
>>> ---
>>>
>>> Changes in v3:
>>> - Add --- line above the version tag information
>>> - Remove extra blank lines in commit messages
>>> - Version tag information from v2 to changes in v2
>>> - Link to v2: https://lore.kernel.org/all/TYUPR06MB6217DAA095A9863D4B58D57CD23B2@TYUPR06MB6217.apcprd06.prod.outlook.com/
>>>
>>> Changes in v2:
>>> - Remove some address information from patch descriptions
>>> - Link to v1: https://lore.kernel.org/all/TYUPR06MB621763AB815989161F4033AFD2762@TYUPR06MB6217.apcprd06.prod.outlook.com/
>>> - Link to suggestions: https://lore.kernel.org/all/TYUPR06MB6217DE28012FFEC5E808DD64D2962@TYUPR06MB6217.apcprd06.prod.outlook.com/
>>>
>>> drivers/usb/gadget/function/u_serial.c | 8 ++++----
>>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
>>> index 53d9fc41acc5..bc143a86c2dd 100644
>>> --- a/drivers/usb/gadget/function/u_serial.c
>>> +++ b/drivers/usb/gadget/function/u_serial.c
>>> @@ -1420,6 +1420,10 @@ void gserial_disconnect(struct gserial *gser)
>>> /* REVISIT as above: how best to track this? */
>>> port->port_line_coding = gser->port_line_coding;
>>> + /* disable endpoints, aborting down any active I/O */
>>> + usb_ep_disable(gser->out);
>>> + usb_ep_disable(gser->in);
>>> +
>>> port->port_usb = NULL;
>>> gser->ioport = NULL;
>>> if (port->port.count > 0) {
>>> @@ -1431,10 +1435,6 @@ void gserial_disconnect(struct gserial *gser)
>>> spin_unlock(&port->port_lock);
>>> spin_unlock_irqrestore(&serial_port_lock, flags);
>>> - /* disable endpoints, aborting down any active I/O */
>>> - usb_ep_disable(gser->out);
>>> - usb_ep_disable(gser->in);
>>> -
>>> /* finally, free any unused/unusable I/O buffers */
>>> spin_lock_irqsave(&port->port_lock, flags);
>>> if (port->port.count == 0)
>>
>>
>> We have observed a reboot regression on Tegra234 (I have not tried other
>> boards) and bisect is pointing to this commit. Reverting this on top of
>> mainline is fixing the problem.
>>
>> With this change, when the board reboots we see ...
>>
>> [ 59.918177] tegra-xudc 3550000.usb: ep 3 disabled
>> [ 59.923097] tegra-xudc 3550000.usb: ep 2 disabled
>> [ 59.927955] tegra-xudc 3550000.usb: ep 5 disabled
>> [ 80.911432] rcu: INFO: rcu_preempt self-detected stall on CPU
>> [ 80.917354] rcu: 6-....: (5248 ticks this GP) idle=ec24/1/0x4000000000000000 softirq=1213/1213 fqs=2623
>> [ 80.927146] rcu: (t=5253 jiffies g=3781 q=1490 ncpus=12)
>> [ 80.932704] Sending NMI from CPU 6 to CPUs 2:
>> [ 90.981555] CPU: 6 UID: 0 PID: 18 Comm: rcu_exp_gp_kthr Not tainted 6.13.0-rc7-00043-g619f0b6fad52 #1
>> [ 90.981558] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 00.0.0-dev-main_92e5ae_88fd1_296de 12/16/2024
>> [ 90.981559] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>> [ 90.981562] pc : smp_call_function_single+0xdc/0x1a0
>> [ 90.981574] lr : __sync_rcu_exp_select_node_cpus+0x228/0x3c0
>> [ 90.981578] sp : ffff800082eb3cd0
>> [ 90.981579] x29: ffff800082eb3cd0 x28: 0000000000000010 x27: ffff0000802933c0
>> [ 90.981582] x26: ffff0007a8a1d700 x25: ffff800082895500 x24: ffff800080132018
>> [ 90.981584] x23: 0000000000000014 x22: ffff800081fb7700 x21: ffff80008280d970
>> [ 90.981586] x20: 0000000000000feb x19: ffff800082eb3d00 x18: 0000000000000000
>> [ 90.981588] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
>> [ 90.981590] x14: ffff000080293440 x13: 0000000000000001 x12: 0000000000000000
>> [ 90.981591] x11: ffff800081fb2388 x10: ffff0000802933c0 x9 : 0000000000000001
>> [ 90.981593] x8 : 0000000000000040 x7 : 0000000000017068 x6 : ffff800080132018
>> [ 90.981595] x5 : 0000000000000000 x4 : ffff0007a8a4f9c8 x3 : 0000000000000001
>> [ 90.981597] x2 : 0000000000000000 x1 : ffff0007a8a4f9c0 x0 : 0000000000000004
>> [ 90.981599] Call trace:
>> [ 90.981601] smp_call_function_single+0xdc/0x1a0 (P)
>> [ 90.981605] __sync_rcu_exp_select_node_cpus+0x228/0x3c0
>> [ 90.981607] sync_rcu_exp_select_cpus+0x13c/0x2a0
>> [ 90.981609] wait_rcu_exp_gp+0x18/0x30
>> [ 90.981611] kthread_worker_fn+0xd0/0x188
>> [ 90.981614] kthread+0x118/0x11c
>> [ 90.981619] ret_from_fork+0x10/0x20
>> [ 101.416347] sched: DL replenish lagged too much
>>
>
> Odd, you have a usb-serial gadget device in this system that is
> disconnecting somehow? That oops doesn't point to anything in the usb
> gadget codebase, "all" we have done is move the call to shutdown the
> endpoints to earlier in the disconnect function.
Yes the board starts usb-serial and usb-ethernet gadget and on reboot
when tearing it down I am seeing the above. As soon as it disables the
tegra-xudc endpoints (as seen above) the board appears to stall.
> I'm glad to revert this, but it feels really odd that this is causing
> you an rcu stall issue.
Thanks. I can't say I understand it either, but I am certain it is
caused by this change.
Happy to run any tests to narrow this down a bit.
Jon
--
nvpublic
Powered by blists - more mailing lists