linux-kernel - Re: [PATCH v6 08/10] misc: rp1: RaspberryPi RP1 misc driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2025012143-rippling-rehydrate-581b@gregkh>
Date: Tue, 21 Jan 2025 09:48:00 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Andrea della Porta <andrea.porta@...e.com>
Cc: Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczynski <kw@...ux.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>, Bartosz Golaszewski <brgl@...ev.pl>,
	Derek Kiernan <derek.kiernan@....com>,
	Dragan Cvetic <dragan.cvetic@....com>,
	Arnd Bergmann <arnd@...db.de>,
	Saravana Kannan <saravanak@...gle.com>, linux-clk@...r.kernel.org,
	devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-pci@...r.kernel.org, linux-gpio@...r.kernel.org,
	Masahiro Yamada <masahiroy@...nel.org>,
	Stefan Wahren <wahrenst@....net>,
	Herve Codina <herve.codina@...tlin.com>,
	Luca Ceresoli <luca.ceresoli@...tlin.com>,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
	Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH v6 08/10] misc: rp1: RaspberryPi RP1 misc driver

On Tue, Jan 21, 2025 at 09:43:37AM +0100, Andrea della Porta wrote:
> Hi Greg,
> 
> On 12:47 Fri 17 Jan     , Greg Kroah-Hartman wrote:
> > On Mon, Jan 13, 2025 at 03:58:07PM +0100, Andrea della Porta wrote:
> > > The RaspberryPi RP1 is a PCI multi function device containing
> > > peripherals ranging from Ethernet to USB controller, I2C, SPI
> > > and others.
> > > 
> > > Implement a bare minimum driver to operate the RP1, leveraging
> > > actual OF based driver implementations for the on-board peripherals
> > > by loading a devicetree overlay during driver probe.
> > > 
> > > The peripherals are accessed by mapping MMIO registers starting
> > > from PCI BAR1 region.
> > > 
> > > With the overlay approach we can achieve more generic and agnostic
> > > approach to managing this chipset, being that it is a PCI endpoint
> > > and could possibly be reused in other hw implementations. The
> > > presented approach is also used by Bootlin's Microchip LAN966x
> > > patchset (see link) as well, for a similar chipset.
> > > 
> > > For reasons why this driver is contained in drivers/misc, please
> > > check the links.
> > 
> > Links aren't always around all the time, please document it here why
> > this is needed, and then links can "add to" that summary.
> 
> Ack.
> 
> > 
> > > This driver is heavily based on downstream code from RaspberryPi
> > > Foundation, and the original author is Phil Elwell.
> > > 
> > > Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
> 
> ...
> 
> > > diff --git a/drivers/misc/rp1/rp1_pci.c b/drivers/misc/rp1/rp1_pci.c
> > > new file mode 100644
> > > index 000000000000..3e8ba3fa7fd5
> > > --- /dev/null
> > > +++ b/drivers/misc/rp1/rp1_pci.c
> > > @@ -0,0 +1,305 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (c) 2018-24 Raspberry Pi Ltd.
> > > + * All rights reserved.
> > > + */
> > > +
> > > +#include <linux/err.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/irq.h>
> > > +#include <linux/irqchip/chained_irq.h>
> > > +#include <linux/irqdomain.h>
> > > +#include <linux/module.h>
> > > +#include <linux/msi.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/platform_device.h>
> > > +
> > > +#include "rp1_pci.h"
> > 
> > Why does a self-contained .c file need a .h file?  Please put it all in
> > here.
> 
> I agree with you. Indeed, the very first version of this patch had the header
> file placed inside the .c, but I received concerns about it and some advice to
> do it differently, as you can see here:
> https://lore.kernel.org/all/ZtWDpaqUG9d9yPPf@apocalypse/
> so I've changed it accordingly in V2. So right now I'm not sure what the
> acceptable behaviour should be ...

It's a pretty simple rule:
	Only use a .h file if multiple .c files need to see the symbol.

So no .h file is needed here.

> > > +struct rp1_dev {
> > > +	struct pci_dev *pdev;
> > > +	struct irq_domain *domain;
> > > +	struct irq_data *pcie_irqds[64];
> > > +	void __iomem *bar1;
> > > +	int ovcs_id;	/* overlay changeset id */
> > > +	bool level_triggered_irq[RP1_INT_END];
> > > +};
> > > +
> > > +static void msix_cfg_set(struct rp1_dev *rp1, unsigned int hwirq, u32 value)
> > > +{
> > > +	iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_SET + MSIX_CFG(hwirq));
> > 
> > Do your writes need a read to flush them properly?  Or can they handle
> > this automatically?
> >
> 
> I had some thoughts with RaspberryPi foundation folks to double check it, and it
> seems that there should be no need to readback the value (unless we want to go
> really paranoid), so I would avoid that since in case of level handled interrupt
> we would end up reading the register on every triggering interrupts.

Ok, if it passes testing, that's fine, hopefully it works properly, but
if not, you now have a trail to go and fix it in the future :)

thanks,

greg k-h