linux-kernel - [PATCH net-next RFC v2 5/6] net: phy: dp83822: Add support for phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250122174252.82730-6-maxime.chevallier@bootlin.com>
Date: Wed, 22 Jan 2025 18:42:50 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	thomas.petazzoni@...tlin.com,
	Andrew Lunn <andrew@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>,
	Eric Dumazet <edumazet@...gle.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>,
	linux-arm-kernel@...ts.infradead.org,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	Herve Codina <herve.codina@...tlin.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Vladimir Oltean <vladimir.oltean@....com>,
	Köry Maincent <kory.maincent@...tlin.com>,
	Marek Behún <kabel@...nel.org>,
	Oleksij Rempel <o.rempel@...gutronix.de>,
	Nicolò Veronese <nicveronese@...il.com>,
	Simon Horman <horms@...nel.org>,
	mwojtas@...omium.org,
	Antoine Tenart <atenart@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>
Subject: [PATCH net-next RFC v2 5/6] net: phy: dp83822: Add support for phy_port representation

With the phy_port representation intrduced, we can use .attach_port to
populate the port information based on either the straps or the
ti,fiber-mode property. This allows simplifying the probe function and
allow users to override the strapping configuration.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
RFC V2: Addressd a warning for an unused variable

 drivers/net/phy/dp83822.c | 63 ++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 24 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 6599feca1967..a1ddb7791452 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -781,17 +781,6 @@ static int dp83822_of_init(struct phy_device *phydev)
 	struct device *dev = &phydev->mdio.dev;
 	const char *of_val;
 
-	/* Signal detection for the PHY is only enabled if the FX_EN and the
-	 * SD_EN pins are strapped. Signal detection can only enabled if FX_EN
-	 * is strapped otherwise signal detection is disabled for the PHY.
-	 */
-	if (dp83822->fx_enabled && dp83822->fx_sd_enable)
-		dp83822->fx_signal_det_low = device_property_present(dev,
-								     "ti,link-loss-low");
-	if (!dp83822->fx_enabled)
-		dp83822->fx_enabled = device_property_present(dev,
-							      "ti,fiber-mode");
-
 	if (!device_property_read_string(dev, "ti,gpio2-clk-out", &of_val)) {
 		if (strcmp(of_val, "mac-if") == 0) {
 			dp83822->gpio2_clk_out = DP83822_CLK_SRC_MAC_IF;
@@ -884,6 +873,43 @@ static int dp83822_read_straps(struct phy_device *phydev)
 	return 0;
 }
 
+static int dp83822_attach_port(struct phy_device *phydev, struct phy_port *port)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	int ret;
+
+	if (port->mediums) {
+		if (phy_port_is_fiber(port) ||
+		    port->mediums & BIT(ETHTOOL_LINK_MEDIUM_BASEX))
+			dp83822->fx_enabled = true;
+	} else {
+		ret = dp83822_read_straps(phydev);
+		if (ret)
+			return ret;
+
+#ifdef CONFIG_OF_MDIO
+		if (dp83822->fx_enabled && dp83822->fx_sd_enable)
+			dp83822->fx_signal_det_low =
+				device_property_present(dev, "ti,link-loss-low");
+		if (!dp83822->fx_enabled)
+			dp83822->fx_enabled =
+				device_property_present(dev, "ti,fiber-mode");
+#endif
+
+		if (dp83822->fx_enabled) {
+			port->lanes = 1;
+			port->mediums = BIT(ETHTOOL_LINK_MEDIUM_BASEF) |
+					BIT(ETHTOOL_LINK_MEDIUM_BASEX);
+		} else {
+			/* This PHY can only to 100BaseTX max, so on 2 lanes */
+			port->lanes = 2;
+			port->mediums = BIT(ETHTOOL_LINK_MEDIUM_BASET);
+		}
+	}
+
+	return 0;
+}
+
 static int dp8382x_probe(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822;
@@ -900,25 +926,13 @@ static int dp8382x_probe(struct phy_device *phydev)
 
 static int dp83822_probe(struct phy_device *phydev)
 {
-	struct dp83822_private *dp83822;
 	int ret;
 
 	ret = dp8382x_probe(phydev);
 	if (ret)
 		return ret;
 
-	dp83822 = phydev->priv;
-
-	ret = dp83822_read_straps(phydev);
-	if (ret)
-		return ret;
-
-	ret = dp83822_of_init(phydev);
-	if (ret)
-		return ret;
-
-	if (dp83822->fx_enabled)
-		phydev->port = PORT_FIBRE;
+	dp83822_of_init(phydev);
 
 	return 0;
 }
@@ -1104,6 +1118,7 @@ static int dp83822_led_hw_control_get(struct phy_device *phydev, u8 index,
 		.led_hw_is_supported = dp83822_led_hw_is_supported,	\
 		.led_hw_control_set = dp83822_led_hw_control_set,	\
 		.led_hw_control_get = dp83822_led_hw_control_get,	\
+		.attach_port = dp83822_attach_port		\
 	}
 
 #define DP83825_PHY_DRIVER(_id, _name)				\
-- 
2.48.1