| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1262657207.382667.1737553381760.JavaMail.zimbra@couthit.local>
Date: Wed, 22 Jan 2025 19:13:01 +0530 (IST)
From: Basharath Hussain Khaja <basharath@...thit.com>
To: Rob Herring <robh@...nel.org>
Cc: basharath <basharath@...thit.com>, danishanwar <danishanwar@...com>,
rogerq <rogerq@...nel.org>, andrew+netdev <andrew+netdev@...n.ch>,
davem <davem@...emloft.net>, edumazet <edumazet@...gle.com>,
kuba <kuba@...nel.org>, pabeni <pabeni@...hat.com>,
krzk+dt <krzk+dt@...nel.org>, conor+dt <conor+dt@...nel.org>,
nm <nm@...com>, ssantosh <ssantosh@...nel.org>,
tony <tony@...mide.com>, richardcochran <richardcochran@...il.com>,
parvathi <parvathi@...thit.com>, schnelle <schnelle@...ux.ibm.com>,
rdunlap <rdunlap@...radead.org>, diogo ivo <diogo.ivo@...mens.com>,
m-karicheri2 <m-karicheri2@...com>, horms <horms@...nel.org>,
jacob e keller <jacob.e.keller@...el.com>,
m-malladi <m-malladi@...com>,
javier carrasco cruz <javier.carrasco.cruz@...il.com>,
afd <afd@...com>, s-anna <s-anna@...com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
netdev <netdev@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-omap <linux-omap@...r.kernel.org>,
pratheesh <pratheesh@...com>, prajith <prajith@...com>,
vigneshr <vigneshr@...com>, praneeth <praneeth@...com>,
srk <srk@...com>, rogerq <rogerq@...com>,
krishna <krishna@...thit.com>, pmohan <pmohan@...thit.com>,
mohan <mohan@...thit.com>
Subject: Re: [RFC PATCH 01/10] dt-bindings: net: ti: Adds device tree
binding for DUAL-EMAC mode support on PRU-ICSS2 for AM57xx SOCs
> On Thu, Jan 09, 2025 at 04:25:51PM +0530, Basharath Hussain Khaja wrote:
>> From: Parvathi Pudi <parvathi@...thit.com>
>>
>> Documentation update for the newly added "pruss2_eth" device tree
>> node and its dependencies along with compatibility for PRU-ICSS
>> Industrial Ethernet Peripheral (IEP), PRU-ICSS Enhanced Capture
>> (eCAP) peripheral and using YAML binding document for AM57xx SoCs.
>>
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> Signed-off-by: Andrew F. Davis <afd@...com>
>> Signed-off-by: Murali Karicheri <m-karicheri2@...com>
>> Signed-off-by: Parvathi Pudi <parvathi@...thit.com>
>> Signed-off-by: Basharath Hussain Khaja <basharath@...thit.com>
>> ---
>> .../devicetree/bindings/net/ti,icss-iep.yaml | 6 +
>> .../bindings/net/ti,icssm-prueth.yaml | 153 ++++++++++++++++++
>> .../bindings/net/ti,pruss-ecap.yaml | 32 ++++
>> .../devicetree/bindings/soc/ti/ti,pruss.yaml | 9 ++
>> 4 files changed, 200 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> create mode 100644 Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> index e36e3a622904..afacdb61a84c 100644
>> --- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> @@ -8,18 +8,24 @@ title: Texas Instruments ICSS Industrial Ethernet Peripheral
>> (IEP) module
>>
>> maintainers:
>> - Md Danish Anwar <danishanwar@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>>
>> properties:
>> compatible:
>> oneOf:
>> - items:
>> - enum:
>> + - ti,am5728-icss-iep
>> - ti,am642-icss-iep
>> - ti,j721e-icss-iep
>> - const: ti,am654-icss-iep
>>
>> - const: ti,am654-icss-iep
>>
>> + - items:
>> + - enum:
>> + - ti,am5728-icss-iep
>
> You can't have both. It's either compatible with ti,am654-icss-iep or it
> isn't.
>
We will clean it up in the next version.
>>
>> reg:
>> maxItems: 1
>> diff --git a/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> new file mode 100644
>> index 000000000000..34d68619c086
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> @@ -0,0 +1,153 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,icssm-prueth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments ICSSM PRUSS Ethernet
>> +
>> +maintainers:
>> + - Roger Quadros <rogerq@...com>
>> + - Andrew F. Davis <afd@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>> +
>> +description:
>> + Ethernet based on the Programmable Real-Time Unit and Industrial
>> + Communication Subsystem.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ti,am57-prueth # for AM57x SoC family
>> +
>> + sram:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to OCMC SRAM node
>> +
>> + ti,mii-rt:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to MII_RT module's syscon regmap
>> +
>> + ti,iep:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to IEP (Industrial Ethernet Peripheral) for ICSS
>> +
>> + ecap:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to Enhanced Capture (eCAP) event for ICSS
>> +
>> + interrupts:
>> + maxItems: 2
>> + description:
>> + Interrupt specifiers to IRQ.
>
> Provide a description for each entry because I can't decipher the names.
>
We will add require description as suggested in the next version.
>> +
>> + interrupt-names:
>> + items:
>> + - const: rx_lre_hp
>> + - const: rx_lre_lp
>
> The same prefix or suffix on every entry is usually redundant.
>
We will clean it up in the next version.
>> +
>> + ethernet-ports:
>> + type: object
>> + additionalProperties: false
>> +
>> + properties:
>> + '#address-cells':
>> + const: 1
>> + '#size-cells':
>> + const: 0
>> +
>> + patternProperties:
>> + ^port@[0-1]$:
>
> ethernet-port
>
We will address this in the next version.
>> + type: object
>> + description: ICSSM PRUETH external ports
>> + $ref: ethernet-controller.yaml#
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + reg:
>> + items:
>> + - enum: [0, 1]
>> + description: ICSSG PRUETH port number
>> +
>> + interrupts:
>> + maxItems: 3
>> +
>> + interrupt-names:
>> + items:
>> + - const: rx
>> + - const: emac_ptp_tx
>> + - const: hsr_ptp_tx
>> +
>> + ti,no-half-duplex:
>> + type: boolean
>> + description:
>> + Disable half duplex operation on ICSSM MII port.
>> +
>> + required:
>> + - reg
>
> blank line
>
We will add a blank line after "-reg" in next version.
>> + anyOf:
>> + - required:
>> + - port@0
>> + - required:
>> + - port@1
>> +
>> +required:
>> + - compatible
>> + - sram
>> + - ti,mii-rt
>> + - ti,iep
>> + - ecap
>> + - ethernet-ports
>> + - interrupts
>> + - interrupt-names
>> +
>> +allOf:
>> + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + /* Dual-MAC Ethernet application node on PRU-ICSS2 */
>> + pruss2_eth: pruss2-eth {
>> + compatible = "ti,am57-prueth";
>> + ti,prus = <&pru2_0>, <&pru2_1>;
>> + sram = <&ocmcram1>;
>> + ti,mii-rt = <&pruss2_mii_rt>;
>> + ti,iep = <&pruss2_iep>;
>> + ecap = <&pruss2_ecap>;
>> + interrupts = <20 2 2>, <21 3 3>;
>> + interrupt-names = "rx_lre_hp", "rx_lre_lp";
>> + interrupt-parent = <&pruss2_intc>;
>> +
>> + ethernet-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pruss2_emac0: port@0 {
>> + reg = <0>;
>> + phy-handle = <&pruss2_eth0_phy>;
>> + phy-mode = "mii";
>> + interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
>> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
>> + ti,no-half-duplex;
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> +
>> + pruss2_emac1: port@1 {
>> + reg = <1>;
>> + phy-handle = <&pruss2_eth1_phy>;
>> + phy-mode = "mii";
>> + interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
>> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
>> + ti,no-half-duplex;
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> new file mode 100644
>> index 000000000000..d42e636bf516
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> @@ -0,0 +1,32 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,pruss-ecap.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments PRU-ICSS Enhanced Capture (eCAP) event module
>> +
>> +maintainers:
>> + - Murali Karicheri <m-karicheri2@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>> +
>> +properties:
>> + compatible:
>> + const: ti,pruss-ecap
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + pruss0_ecap: ecap@...00 {
>
> Drop unused labels.
>
We will address this in the next version.
>> + compatible = "ti,pruss-ecap";
>> + reg = <0x30000 0x60>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> index 927b3200e29e..ddd65bd93aa1 100644
>> --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> @@ -251,6 +251,15 @@ patternProperties:
>>
>> type: object
>>
>> + ecap@[a-f0-9]+$:
>> + description: |
>
> Don't need '|'
>
We will clean up in next version.
>> + PRU-ICSS has a Enhanced Capture (eCAP) event module which can generate
>> + and capture periodic timer based events which will be used for features
>> + like RX Pacing to rise interrupt when the timer event has occurred.
>> + Each PRU-ICSS instance has one eCAP modeule irrespective of SOCs.
>> +
>> + type: object
>> +
>> mii-rt@[a-f0-9]+$:
>> description: |
>> Real-Time Ethernet to support multiple industrial communication protocols.
>> --
>> 2.34.1
Powered by blists - more mailing lists