[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <k4hno2c46ys3unusw4emhkevp3yezhtgyy566vfyfju3efyei2@twict2pypjug>
Date: Thu, 23 Jan 2025 13:29:35 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Damon Ding <damon.ding@...k-chips.com>
Cc: heiko@...ech.de, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, rfoss@...nel.org, vkoul@...nel.org,
sebastian.reichel@...labora.com, cristian.ciocaltea@...labora.com, l.stach@...gutronix.de,
andy.yan@...k-chips.com, hjc@...k-chips.com, algea.cao@...k-chips.com,
kever.yang@...k-chips.com, dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org
Subject: Re: [PATCH v6 11/14] drm/rockchip: analogix_dp: Add support for
RK3588
On Thu, Jan 23, 2025 at 06:07:44PM +0800, Damon Ding wrote:
> RK3588 integrates the Analogix eDP 1.3 TX controller IP and the HDMI/eDP
> TX Combo PHY based on a Samsung IP block. There are also two independent
> eDP display interface with different address on RK3588 Soc.
>
> The patch currently adds only the basic support, specifically RGB output
> up to 4K@...z, without the tests for audio, PSR and other eDP 1.3 specific
> features.
>
> In additon, the above Analogix IP has always been utilized as eDP on
> Rockchip platform, despite its capability to also support the DP v1.2.
> Therefore, the newly added logs will contain the term 'edp' rather than
> 'dp'. And the newly added 'apb' reset control is to ensure the APB bus
> of eDP controller works well on the RK3588 SoC.
>
> Signed-off-by: Damon Ding <damon.ding@...k-chips.com>
>
> ---
>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
--
With best wishes
Dmitry
Powered by blists - more mailing lists