linux-kernel - [PATCH v2] serial: 8250

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20250124031835.1788995-1-yenchia.chen@mediatek.com>
Date: Fri, 24 Jan 2025 11:18:32 +0800
From: Yenchia Chen <yenchia.chen@...iatek.com>
To: <gregkh@...uxfoundation.org>, <jirislaby@...nel.org>,
	<matthias.bgg@...il.com>, <angelogioacchino.delregno@...labora.com>
CC: <yenchia.chen@...iatek.com>, <yj.chiang@...iatek.com>,
	<tbergstrom@...dia.com>, <treapking@...omium.org>,
	<andriy.shevchenko@...ux.intel.com>, <u.kleine-koenig@...libre.com>,
	<yujiaoliang@...o.com>, <linux-kernel@...r.kernel.org>,
	<linux-serial@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<linux-mediatek@...ts.infradead.org>
Subject: [PATCH v2] serial: 8250_mtk: Add ACPI support

Add ACPI support to 8250_mtk driver. This makes it possible to
use UART on ARM-based desktops with EDK2 UEFI firmware.

Signed-off-by: Yenchia Chen <yenchia.chen@...iatek.com>
---
 drivers/tty/serial/8250/8250_mtk.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b44de2ed7413..d06952081191 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Matthias Brugger <matthias.bgg@...il.com>
  */
+#include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -15,6 +16,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/units.h>
 #include <linux/console.h>
 #include <linux/dma-mapping.h>
 #include <linux/tty.h>
@@ -519,6 +521,7 @@ static int mtk8250_probe(struct platform_device *pdev)
 	struct mtk8250_data *data;
 	struct resource *regs;
 	int irq, err;
+	acpi_handle acpi_dev_handle = ACPI_HANDLE(&pdev->dev);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -545,8 +548,9 @@ static int mtk8250_probe(struct platform_device *pdev)
 		err = mtk8250_probe_of(pdev, &uart.port, data);
 		if (err)
 			return err;
-	} else
+	} else if (!acpi_dev_handle) {
 		return -ENODEV;
+	}
 
 	spin_lock_init(&uart.port.lock);
 	uart.port.mapbase = regs->start;
@@ -562,14 +566,18 @@ static int mtk8250_probe(struct platform_device *pdev)
 	uart.port.startup = mtk8250_startup;
 	uart.port.set_termios = mtk8250_set_termios;
 	uart.port.uartclk = clk_get_rate(data->uart_clk);
+	if (!uart.port.uartclk)
+		uart.port.uartclk = 26 * HZ_PER_MHZ;
 #ifdef CONFIG_SERIAL_8250_DMA
 	if (data->dma)
 		uart.dma = data->dma;
 #endif
 
-	/* Disable Rate Fix function */
-	writel(0x0, uart.port.membase +
+	if (!acpi_dev_handle) {
+		/* Disable Rate Fix function */
+		writel(0x0, uart.port.membase +
 			(MTK_UART_RATE_FIX << uart.port.regshift));
+	}
 
 	platform_set_drvdata(pdev, data);
 
@@ -647,11 +655,18 @@ static const struct of_device_id mtk8250_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk8250_of_match);
 
+static const struct acpi_device_id mtk8250_acpi_match[] = {
+	{ "MTKI0511", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, mtk8250_acpi_match);
+
 static struct platform_driver mtk8250_platform_driver = {
 	.driver = {
 		.name		= "mt6577-uart",
 		.pm		= &mtk8250_pm_ops,
 		.of_match_table	= mtk8250_of_match,
+		.acpi_match_table = mtk8250_acpi_match,
 	},
 	.probe			= mtk8250_probe,
 	.remove			= mtk8250_remove,
-- 
2.45.2