[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9199671c-f647-4c39-8618-f2d7fa28f081@rock-chips.com>
Date: Fri, 24 Jan 2025 18:20:21 +0800
From: Damon Ding <damon.ding@...k-chips.com>
To: "Rob Herring (Arm)" <robh@...nel.org>
Cc: devicetree@...r.kernel.org, kever.yang@...k-chips.com,
l.stach@...gutronix.de, linux-phy@...ts.infradead.org, vkoul@...nel.org,
linux-kernel@...r.kernel.org, cristian.ciocaltea@...labora.com,
hjc@...k-chips.com, sebastian.reichel@...labora.com,
dmitry.baryshkov@...aro.org, rfoss@...nel.org, krzk+dt@...nel.org,
heiko@...ech.de, andy.yan@...k-chips.com,
linux-arm-kernel@...ts.infradead.org, dri-devel@...ts.freedesktop.org,
algea.cao@...k-chips.com, linux-rockchip@...ts.infradead.org,
conor+dt@...nel.org
Subject: Re: [PATCH v6 09/14] dt-bindings: display: rockchip: analogix-dp: Add
support for RK3588
Hi Rob,
On 2025/1/23 19:22, Rob Herring (Arm) wrote:
>
> On Thu, 23 Jan 2025 18:07:42 +0800, Damon Ding wrote:
>> Compared with RK3288/RK3399, the HBR2 link rate support is the main
>> improvement of RK3588 eDP TX controller, and there are also two
>> independent eDP display interfaces on RK3588 Soc.
>>
>> The newly added 'apb' reset is to ensure the APB bus of eDP controller
>> works well on the RK3588 SoC.
>>
>> Signed-off-by: Damon Ding <damon.ding@...k-chips.com>
>>
>> ---
>>
>> Changes in v2:
>> - Add the main defferences of the RK3588 eDP and the previous versions
>> in commit message
>>
>> Changes in v3:
>> - Expand the property clock-names, resets and reset-names
>>
>> Changes in v4:
>> - Remove 'spdif' clock which added in v3
>> - Add the comment of newly added 'apb' reset in commit message
>>
>> Changes in v5:
>> - Put the differences between RK3288/RK3399 and RK3588 into 'allOf'
>>
>> Changes in v6:
>> - Keep the widest constraints and add only RK3588 related constraints
>> into 'allOf'
>> ---
>> .../rockchip/rockchip,analogix-dp.yaml | 22 ++++++++++++++++++-
>> 1 file changed, 21 insertions(+), 1 deletion(-)
>>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml: properties:reset-names: 'const' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
> hint: Scalar and array keywords cannot be mixed
> from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml: properties:reset-names: 'const' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
> hint: Scalar and array keywords cannot be mixed
> from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250123100747.1841357-10-damon.ding@rock-chips.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
>
>
I have found these errors using dt_binding_check and will fix them in
the next version.
Best regards
Damon
Powered by blists - more mailing lists