[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f3a7e280-9d47-45f2-aef4-394b378ba99d@app.fastmail.com>
Date: Fri, 24 Jan 2025 16:03:28 +0100
From: "Arnd Bergmann" <arnd@...db.de>
To: "Linus Torvalds" <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
soc@...ts.linux.dev
Subject: [GIT PULL 2/5] soc: new SoC support for 6.14
The following changes since commit fac04efc5c793dccbd07e2d59af9f90b7fc0dca4:
Linux 6.13-rc2 (2024-12-08 14:03:39 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git tags/soc-new-6.14
for you to fetch changes up to 0bcf3ac14626f1c174c262834656603769579497:
Merge tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux into soc/newsoc (2025-01-23 17:36:29 +0100)
----------------------------------------------------------------
soc: new SoC support for 6.14
Two new SoC families are added here, with devicetree files and
a little bit of infrastructure to allow booting:
- Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
Processor) cores for computation, and two small Cortex-A53 cores
that run the operating system.
- SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
compatible CPU cores with vector support.
Also marketed at AI applications, it has a much slower NPU compared
to BLZP1600, but in turn focuses on the CPU performance
----------------------------------------------------------------
Arnd Bergmann (1):
Merge tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux into soc/newsoc
Nikolaos Pasaloukos (6):
dt-bindings: Add Blaize vendor prefix
dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
arm64: Add Blaize BLZP1600 SoC family
arm64: dts: Add initial support for Blaize BLZP1600 CB2
arm64: defconfig: Enable Blaize BLZP1600 platform
MAINTAINER: Add entry for Blaize SoC
Yangyu Chen (8):
dt-bindings: riscv: Add SpacemiT X60 compatibles
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
riscv: add SpacemiT SoC family Kconfig support
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: defconfig: enable SpacemiT SoC
Yixun Lan (4):
MAINTAINERS: setup support for SpacemiT SoC tree
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: dts: spacemit: move aliases to board dts
Documentation/devicetree/bindings/arm/blaize.yaml | 40 ++
.../interrupt-controller/sifive,plic-1.0.0.yaml | 1 +
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
.../devicetree/bindings/riscv/spacemit.yaml | 28 ++
Documentation/devicetree/bindings/serial/8250.yaml | 4 +-
.../devicetree/bindings/timer/sifive,clint.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 18 +
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/blaize/Makefile | 2 +
arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts | 83 ++++
.../arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi | 23 ++
arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi | 205 ++++++++++
arch/arm64/configs/defconfig | 1 +
arch/riscv/Kconfig.socs | 5 +
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/spacemit/Makefile | 2 +
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 26 ++
arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi | 20 +
arch/riscv/boot/dts/spacemit/k1.dtsi | 452 +++++++++++++++++++++
arch/riscv/configs/defconfig | 1 +
22 files changed, 921 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/blaize.yaml
create mode 100644 Documentation/devicetree/bindings/riscv/spacemit.yaml
create mode 100644 arch/arm64/boot/dts/blaize/Makefile
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
create mode 100644 arch/riscv/boot/dts/spacemit/Makefile
create mode 100644 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
create mode 100644 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
create mode 100644 arch/riscv/boot/dts/spacemit/k1.dtsi
Powered by blists - more mailing lists