| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250126-ppcyaml-v1-3-50649f51c3dd@posteo.net>
Date: Sun, 26 Jan 2025 19:58:58 +0100
From: J. Neuschäfer via B4 Relay <devnull+j.ne.posteo.net@...nel.org>
To: devicetree@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org
Cc: Scott Wood <oss@...error.net>,
Madhavan Srinivasan <maddy@...ux.ibm.com>,
Michael Ellerman <mpe@...erman.id.au>, Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Naveen N Rao <naveen@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Damien Le Moal <dlemoal@...nel.org>,
Niklas Cassel <cassel@...nel.org>, Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>, Lee Jones <lee@...nel.org>,
Vinod Koul <vkoul@...nel.org>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
J. Neuschäfer <j.neuschaefer@....net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>, Mark Brown <broonie@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>, Vignesh Raghavendra <vigneshr@...com>,
linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
linux-crypto@...r.kernel.org, dmaengine@...r.kernel.org,
linux-pci@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-spi@...r.kernel.org, linux-mtd@...ts.infradead.org,
J. Neuschäfer <j.ne@...teo.net>
Subject: [PATCH 3/9] dt-bindings: crypto: Convert fsl,sec-2.0 binding to
YAML
From: "J. Neuschäfer" <j.ne@...teo.net>
Convert the Freescale security engine (crypto accelerator) binding from
text form to YAML. The list of compatible strings reflects what was
previously described in prose; not all combinations occur in existing
devicetrees.
Signed-off-by: J. Neuschäfer <j.ne@...teo.net>
---
.../devicetree/bindings/crypto/fsl,sec2.0.yaml | 139 +++++++++++++++++++++
.../devicetree/bindings/crypto/fsl-sec2.txt | 65 ----------
2 files changed, 139 insertions(+), 65 deletions(-)
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..5ae593e60987e175413c3a082c9466f09f642bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SoC SEC Security Engines versions 1.x-2.x-3.x
+
+maintainers:
+ - J. Neuschäfer <j.ne@...teo.net.
+
+properties:
+ compatible:
+ description: |
+ Should contain entries for this and backward compatible SEC versions,
+ high to low. Warning: SEC1 and SEC2 are mutually exclusive.
+ oneOf:
+ - items:
+ - const: fsl,sec3.3
+ - const: fsl,sec3.1
+ - const: fsl,sec3.0
+ - const: fsl,sec2.4
+ - const: fsl,sec2.2
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec3.1
+ - const: fsl,sec3.0
+ - const: fsl,sec2.4
+ - const: fsl,sec2.2
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec3.0
+ - const: fsl,sec2.4
+ - const: fsl,sec2.2
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec2.4
+ - const: fsl,sec2.2
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec2.2
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec2.1
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec2.0
+ - items:
+ - const: fsl,sec1.2
+ - const: fsl,sec1.0
+ - items:
+ - const: fsl,sec1.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ fsl,num-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: An integer representing the number of channels available.
+
+ fsl,channel-fifo-len:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ An integer representing the number of descriptor pointers each channel
+ fetch fifo can hold.
+
+ fsl,exec-units-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The bitmask representing what execution units (EUs) are available.
+ EU information should be encoded following the SEC's Descriptor Header
+ Dword EU_SEL0 field documentation, i.e. as follows:
+
+ bit 0 = reserved - should be 0
+ bit 1 = set if SEC has the ARC4 EU (AFEU)
+ bit 2 = set if SEC has the DES/3DES EU (DEU)
+ bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A)
+ bit 4 = set if SEC has the random number generator EU (RNG)
+ bit 5 = set if SEC has the public key EU (PKEU)
+ bit 6 = set if SEC has the AES EU (AESU)
+ bit 7 = set if SEC has the Kasumi EU (KEU)
+ bit 8 = set if SEC has the CRC EU (CRCU)
+ bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
+
+ remaining bits are reserved for future SEC EUs.
+
+ fsl,descriptor-types-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The bitmask representing what descriptors are available. Descriptor type
+ information should be encoded following the SEC's Descriptor Header Dword
+ DESC_TYPE field documentation, i.e. as follows:
+
+ bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type
+ bit 1 = set if SEC supports the ipsec_esp descriptor type
+ bit 2 = set if SEC supports the common_nonsnoop desc. type
+ bit 3 = set if SEC supports the 802.11i AES ccmp desc. type
+ bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type
+ bit 5 = set if SEC supports the srtp descriptor type
+ bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type
+ bit 7 = set if SEC supports the pkeu_assemble descriptor type
+ bit 8 = set if SEC supports the aesu_key_expand_output desc.type
+ bit 9 = set if SEC supports the pkeu_ptmul descriptor type
+ bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
+ bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+ ..and so on and so forth.
+
+required:
+ - compatible
+ - reg
+ - fsl,num-channels
+ - fsl,channel-fifo-len
+ - fsl,exec-units-mask
+ - fsl,descriptor-types-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /* MPC8548E */
+ crypto@...00 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <29 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+ };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
deleted file mode 100644
index 125f155d00d052eec7d5093b5c5076cbe720417f..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Freescale SoC SEC Security Engines versions 1.x-2.x-3.x
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
- SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3)
- e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1)
- warning: SEC1 and SEC2 are mutually exclusive
-- reg : Offset and length of the register set for the device
-- interrupts : the SEC's interrupt number
-- fsl,num-channels : An integer representing the number of channels
- available.
-- fsl,channel-fifo-len : An integer representing the number of
- descriptor pointers each channel fetch fifo can hold.
-- fsl,exec-units-mask : The bitmask representing what execution units
- (EUs) are available. It's a single 32-bit cell. EU information
- should be encoded following the SEC's Descriptor Header Dword
- EU_SEL0 field documentation, i.e. as follows:
-
- bit 0 = reserved - should be 0
- bit 1 = set if SEC has the ARC4 EU (AFEU)
- bit 2 = set if SEC has the DES/3DES EU (DEU)
- bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A)
- bit 4 = set if SEC has the random number generator EU (RNG)
- bit 5 = set if SEC has the public key EU (PKEU)
- bit 6 = set if SEC has the AES EU (AESU)
- bit 7 = set if SEC has the Kasumi EU (KEU)
- bit 8 = set if SEC has the CRC EU (CRCU)
- bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
-
-remaining bits are reserved for future SEC EUs.
-
-- fsl,descriptor-types-mask : The bitmask representing what descriptors
- are available. It's a single 32-bit cell. Descriptor type information
- should be encoded following the SEC's Descriptor Header Dword DESC_TYPE
- field documentation, i.e. as follows:
-
- bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type
- bit 1 = set if SEC supports the ipsec_esp descriptor type
- bit 2 = set if SEC supports the common_nonsnoop desc. type
- bit 3 = set if SEC supports the 802.11i AES ccmp desc. type
- bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type
- bit 5 = set if SEC supports the srtp descriptor type
- bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type
- bit 7 = set if SEC supports the pkeu_assemble descriptor type
- bit 8 = set if SEC supports the aesu_key_expand_output desc.type
- bit 9 = set if SEC supports the pkeu_ptmul descriptor type
- bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
- bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
-
- ..and so on and so forth.
-
-Example:
-
- /* MPC8548E */
- crypto@...00 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <29 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
--
2.48.0.rc1.219.gb6b6757d772
Powered by blists - more mailing lists