[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250127-hungry-bald-groundhog-4f7d4b@krzk-bin>
Date: Mon, 27 Jan 2025 09:26:29 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Konrad Dybcio <konradybcio@...nel.org>
Cc: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH 2/6] dt-bindings: phy: qcom,qmp-pcie: Drop reset number
constraints
On Sat, Jan 25, 2025 at 04:31:18AM +0100, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
>
> (Almost?) all QMP PHYs come with both a "full reset" ("phy") and a
> "retain certain registers" one ("phy_nocsr").
>
> Drop the maxItems=1 constraint for resets and reset_names as we go
> ahead and straighten out the DT usage. After that's done (which
> will involve modifying some clock drivers etc.), we may set
> *min*Items to 2, bar some possible exceptions.
You drop minItems now, so that's a bit confusing. If all devices have
two resets, just change in top-level resets the minItems -> 2 now and
mention that it does not affect the ABI, because Linux will support
missing reset and it describes the hardware more accurately.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
> ---
> .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 24 ----------------------
> 1 file changed, 24 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index f1ffc3d5cae44b8a9c96cdcd749a6e54533c94f6..c42143bd139e30d1beabc9099d0dde17128413bf 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -204,30 +204,6 @@ allOf:
> clock-names:
> minItems: 7
>
> - - if:
> - properties:
> - compatible:
> - contains:
> - enum:
> - - qcom,sm8550-qmp-gen4x2-pcie-phy
> - - qcom,sm8650-qmp-gen4x2-pcie-phy
> - - qcom,x1e80100-qmp-gen4x2-pcie-phy
> - - qcom,x1e80100-qmp-gen4x4-pcie-phy
> - - qcom,x1e80100-qmp-gen4x8-pcie-phy
> - - qcom,x1p42100-qmp-gen4x4-pcie-phy
You just added this line, so this patch should be #1.
Best regards,
Krzysztof
Powered by blists - more mailing lists