lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <24defb9f-fecf-477b-89a3-780d887cae5d@solid-run.com>
Date: Mon, 27 Jan 2025 13:40:31 +0000
From: Josua Mayer <josua@...id-run.com>
To: Adrian Hunter <adrian.hunter@...el.com>, Ulf Hansson
	<ulf.hansson@...aro.org>
CC: "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, Rabeeh Khoury
	<rabeeh@...id-run.com>, Jon Nettleton <jon@...id-run.com>,
	"stable@...r.kernel.org" <stable@...r.kernel.org>, Judith Mendez <jm@...com>
Subject: Re: [PATCH] Revert "mmc: sdhci_am654: Add
 sdhci_am654_start_signal_voltage_switch"

Cc: Judith Mendez <jm@...com>

Am 27.01.25 um 14:35 schrieb Josua Mayer:
> This reverts commit 941a7abd4666912b84ab209396fdb54b0dae685d.
>
> This commit uses presence of device-tree properties vmmc-supply and
> vqmmc-supply for deciding whether to enable a quirk affecting timing of
> clock and data.
> The intention was to address issues observed with eMMC and SD on AM62
> platforms.
>
> This new quirk is however also enabled for AM64 breaking microSD access
> on the SolidRun HimmingBoard-T which is supported in-tree since v6.11,
> causing a regression. During boot microSD initialization now fails with
> the error below:
>
> [    2.008520] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
> [    2.115348] mmc1: error -110 whilst initialising SD card
>
> The heuristics for enabling the quirk are clearly not correct as they
> break at least one but potentially many existing boards.
>
> Revert the change and restore original behaviour until a more
> appropriate method of selecting the quirk is derived.
>
> Fixes: <941a7abd4666> ("mtd: spi-nor: core: replace dummy buswidth from addr to data")
> Closes: https://lore.kernel.org/linux-mmc/a70fc9fc-186f-4165-a652-3de50733763a@solid-run.com/
> Cc: stable@...r.kernel.org # 6.13
> Signed-off-by: Josua Mayer <josua@...id-run.com>
> ---
>  drivers/mmc/host/sdhci_am654.c | 30 ------------------------------
>  1 file changed, 30 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index b73f673db92bbc042392995e715815e15ace6005..f75c31815ab00d17b5757063521f56ba5643babe 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -155,7 +155,6 @@ struct sdhci_am654_data {
>  	u32 tuning_loop;
>  
>  #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
> -#define SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA BIT(1)
>  };
>  
>  struct window {
> @@ -357,29 +356,6 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
>  	sdhci_set_clock(host, clock);
>  }
>  
> -static int sdhci_am654_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
> -{
> -	struct sdhci_host *host = mmc_priv(mmc);
> -	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> -	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
> -	int ret;
> -
> -	if ((sdhci_am654->quirks & SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA) &&
> -	    ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> -		if (!IS_ERR(mmc->supply.vqmmc)) {
> -			ret = mmc_regulator_set_vqmmc(mmc, ios);
> -			if (ret < 0) {
> -				pr_err("%s: Switching to 1.8V signalling voltage failed,\n",
> -				       mmc_hostname(mmc));
> -				return -EIO;
> -			}
> -		}
> -		return 0;
> -	}
> -
> -	return sdhci_start_signal_voltage_switch(mmc, ios);
> -}
> -
>  static u8 sdhci_am654_write_power_on(struct sdhci_host *host, u8 val, int reg)
>  {
>  	writeb(val, host->ioaddr + reg);
> @@ -868,11 +844,6 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev,
>  	if (device_property_read_bool(dev, "ti,fails-without-test-cd"))
>  		sdhci_am654->quirks |= SDHCI_AM654_QUIRK_FORCE_CDTEST;
>  
> -	/* Suppress v1p8 ena for eMMC and SD with vqmmc supply */
> -	if (!!of_parse_phandle(dev->of_node, "vmmc-supply", 0) ==
> -	    !!of_parse_phandle(dev->of_node, "vqmmc-supply", 0))
> -		sdhci_am654->quirks |= SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA;
> -
>  	sdhci_get_of_property(pdev);
>  
>  	return 0;
> @@ -969,7 +940,6 @@ static int sdhci_am654_probe(struct platform_device *pdev)
>  		goto err_pltfm_free;
>  	}
>  
> -	host->mmc_host_ops.start_signal_voltage_switch = sdhci_am654_start_signal_voltage_switch;
>  	host->mmc_host_ops.execute_tuning = sdhci_am654_execute_tuning;
>  
>  	pm_runtime_get_noresume(dev);
>
> ---
> base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04
> change-id: 20250127-am654-mmc-regression-ed289f8967c2
>
> Best regards,

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ