lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2025012756-dividers-goon-8c9b@gregkh>
Date: Mon, 27 Jan 2025 15:12:22 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: Josua Mayer <josua@...id-run.com>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
	Ulf Hansson <ulf.hansson@...aro.org>, linux-mmc@...r.kernel.org,
	linux-kernel@...r.kernel.org, rabeeh@...id-run.com,
	jon@...id-run.com, stable@...r.kernel.org
Subject: Re: [PATCH] Revert "mmc: sdhci_am654: Add
 sdhci_am654_start_signal_voltage_switch"

On Mon, Jan 27, 2025 at 02:35:29PM +0100, Josua Mayer wrote:
> This reverts commit 941a7abd4666912b84ab209396fdb54b0dae685d.
> 
> This commit uses presence of device-tree properties vmmc-supply and
> vqmmc-supply for deciding whether to enable a quirk affecting timing of
> clock and data.
> The intention was to address issues observed with eMMC and SD on AM62
> platforms.
> 
> This new quirk is however also enabled for AM64 breaking microSD access
> on the SolidRun HimmingBoard-T which is supported in-tree since v6.11,
> causing a regression. During boot microSD initialization now fails with
> the error below:
> 
> [    2.008520] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
> [    2.115348] mmc1: error -110 whilst initialising SD card
> 
> The heuristics for enabling the quirk are clearly not correct as they
> break at least one but potentially many existing boards.
> 
> Revert the change and restore original behaviour until a more
> appropriate method of selecting the quirk is derived.
> 
> Fixes: <941a7abd4666> ("mtd: spi-nor: core: replace dummy buswidth from addr to data")

Please don't use "<>" in the Fixes: line, that's not how the
documentation asks to use it.

thanks,

greg k-h

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ