linux-kernel - [PATCH v2 11/16] iio: adc: ad7768-1: Add VCM output support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e8d7d5d718dc377787e2d3f1bacf2217e50726a4.1737985435.git.Jonathan.Santos@analog.com>
Date: Mon, 27 Jan 2025 12:13:32 -0300
From: Jonathan Santos <Jonathan.Santos@...log.com>
To: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC: Sergiu Cuciurean <sergiu.cuciurean@...log.com>, <lars@...afoo.de>,
        <Michael.Hennerich@...log.com>, <marcelo.schmitt@...log.com>,
        <jic23@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <jonath4nns@...il.com>,
        <marcelo.schmitt1@...il.com>,
        Jonathan Santos <Jonathan.Santos@...log.com>
Subject: [PATCH v2 11/16] iio: adc: ad7768-1: Add VCM output support

From: Sergiu Cuciurean <sergiu.cuciurean@...log.com>

The VCM output voltage can be used as a common-mode voltage within the
amplifier preconditioning circuits external to the AD7768-1.

This change allows the user to configure VCM output trough a devicetree
attribute.

Co-developed-by: Jonathan Santos <Jonathan.Santos@...log.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@...log.com>
---
v2 Changes:
* VCM output support is now defined by a devicetree property, instead of 
  and IIO attribute.
---
 drivers/iio/adc/ad7768-1.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 8487b9a06609..c540583808c2 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -24,6 +24,8 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
 
+#include <dt-bindings/iio/adc/adi,ad7768-1.h>
+
 /* AD7768 registers definition */
 #define AD7768_REG_CHIP_TYPE		0x3
 #define AD7768_REG_PROD_ID_L		0x4
@@ -347,6 +349,11 @@ static int ad7768_set_freq(struct ad7768_state *st,
 	return 0;
 }
 
+static int ad7768_set_vcm_output(struct ad7768_state *st, unsigned int mode)
+{
+	return regmap_write(st->regmap, AD7768_REG_ANALOG2, mode);
+}
+
 static ssize_t ad7768_sampling_freq_avail(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
@@ -628,6 +635,7 @@ static int ad7768_probe(struct spi_device *spi)
 {
 	struct ad7768_state *st;
 	struct iio_dev *indio_dev;
+	u32 val;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
@@ -688,6 +696,18 @@ static int ad7768_probe(struct spi_device *spi)
 	indio_dev->info = &ad7768_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	ret = device_property_read_u32(&spi->dev, "adi,vcm-output", &val);
+	if (!ret) {
+		if (val > AD7768_VCM_OUTPUT_OFF) {
+			dev_err(&spi->dev, "Invalid VCM output value\n");
+			return -EINVAL;
+		}
+
+		ret = ad7768_set_vcm_output(st, val);
+		if (ret)
+			return ret;
+	}
+
 	ret = ad7768_setup(st);
 	if (ret < 0) {
 		dev_err(&spi->dev, "AD7768 setup failed\n");
-- 
2.34.1