[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <76f9e9e8-dd7c-e783-fccc-0b6f913ce753@ti.com>
Date: Tue, 28 Jan 2025 10:52:27 -0600
From: Hari Nagalla <hnagalla@...com>
To: Andrew Davis <afd@...com>, Judith Mendez <jm@...com>,
Nishanth Menon
<nm@...com>, Vignesh Raghavendra <vigneshr@...com>
CC: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Devarsh Thakkar
<devarsht@...com>
Subject: Re: [PATCH 2/4] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc
node
On 1/28/25 10:27, Andrew Davis wrote:
>> + mcu_r5fss0: r5fss@...00000 {
>> + compatible = "ti,am62-r5fss";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x79000000 0x00 0x79000000 0x8000>,
>> + <0x79020000 0x00 0x79020000 0x8000>;
>> + power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
>
> Newline here.
>
> Also this should be default "disabled". It can be set to "okay"
> in the board DTS file when the needed mboxes and memory-region
> are set. Speaking of that, where are those patches? This is
> incomplete without them and these nodes will not function.
> Same for the DSP patch.
>
> Andrew
Yes, by default needs to set the node state to "disabled". This is HW
description of the wake-up domain components. Memory carve outs and
mailbox assignments for IPC are a separate patch as it is configurable
and distro dependent.
Powered by blists - more mailing lists