Message-ID: <20250129165122.2980-12-thierry.bultel.yh@bp.renesas.com>
Date: Wed, 29 Jan 2025 16:37:47 +0000
From: Thierry Bultel <thierry.bultel.yh@...renesas.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jirislaby@...nel.org>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>
Cc: Thierry Bultel <thierry.bultel.yh@...renesas.com>,
	linux-kernel@...r.kernel.org,
	linux-serial@...r.kernel.org,
	linux-renesas-soc@...r.kernel.org
Subject: [PATCH 11/14] serial: sh-sci: Add support for RZ/T2H SCI

Define a new RZSCI port type, and the RSCI 32 bits registers set.
The RZ/T2H SCI has a a fifo, and a quite different set of registers
from the orginal SH SCI ones.
DMA is not supported yet.

Signed-off-by: Thierry Bultel <thierry.bultel.yh@...renesas.com>
---
 drivers/tty/serial/Kconfig       |   7 +
 drivers/tty/serial/Makefile      |   1 +
 drivers/tty/serial/rzsci.c       | 484 +++++++++++++++++++++++++++++++
 drivers/tty/serial/rzsci.h       |  12 +
 drivers/tty/serial/sh-sci.c      |  20 +-
 include/linux/serial_sci.h       |   3 +-
 include/uapi/linux/serial_core.h |   3 +
 7 files changed, 524 insertions(+), 6 deletions(-)
 create mode 100644 drivers/tty/serial/rzsci.c
 create mode 100644 drivers/tty/serial/rzsci.h

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 45f0f779fbf9..72b563f2e9ba 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -671,6 +671,13 @@ config SERIAL_SH_SCI_DMA
 	depends on SERIAL_SH_SCI && DMA_ENGINE
 	default ARCH_RENESAS
 
+config SERIAL_RZ_SCI
+	tristate "Support for Renesas RZ/T2H SCI variant"
+	depends on SERIAL_SH_SCI
+	help
+	  Support for the RZ/T2H SCI variant with fifo.
+	  Say Y if you want to be able to the RZ/T2H SCI serial port.
+
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 6ff74f0a9530..537e0a0fc047 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_QCOM_GENI)		+= qcom_geni_serial.o
 obj-$(CONFIG_SERIAL_QE)			+= ucc_uart.o
 obj-$(CONFIG_SERIAL_RDA)		+= rda-uart.o
 obj-$(CONFIG_SERIAL_RP2)		+= rp2.o
+obj-$(CONFIG_SERIAL_RZ_SCI)		+= rzsci.o
 obj-$(CONFIG_SERIAL_SA1100)		+= sa1100.o
 obj-$(CONFIG_SERIAL_SAMSUNG)		+= samsung_tty.o
 obj-$(CONFIG_SERIAL_SB1250_DUART)	+= sb1250-duart.o
diff --git a/drivers/tty/serial/rzsci.c b/drivers/tty/serial/rzsci.c
new file mode 100644
index 000000000000..7a6452600123
--- /dev/null
+++ b/drivers/tty/serial/rzsci.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_sci.h>
+#include <linux/tty_flip.h>
+#include "rzsci.h"
+
+/* RSCI registers */
+#define RDR	0x00
+#define TDR	0x04
+#define CCR0	0x08
+#define CCR1	0x0C
+#define CCR2	0x10
+#define CCR3	0x14
+#define CCR4	0x18
+#define FCR	0x24
+#define DCR	0x30
+#define CSR	0x48
+#define FRSR	0x50
+#define FTSR	0x54
+#define CFCLR	0x68
+#define FFCLR	0x70
+
+/* RDR (Receive Data Register) */
+#define RDR_FER			BIT(28)	/* Framing Error */
+#define RDR_PER			BIT(27)	/* Parity Error */
+#define RDR_ORER		BIT(24)	/* Overrun Error */
+#define RDR_FFER		BIT(12)	/* FIFO Framing Error */
+#define RDR_FPER		BIT(11)	/* FIFO Parity Error */
+#define RDR_DR			BIT(10)	/* Incoming Data Ready */
+#define RDR_MPB			BIT(9)	/* Multiprocessor Bit */
+#define	RDR_RDAT_MSK		GENMASK(8, 0)
+
+/* TDR (Transmit Data Register) */
+#define TDR_MPBT		BIT(9)	/* Multiprocessor Transfer */
+#define TDR_TDAT_9BIT_LSHIFT	0
+#define TDR_TDAT_9BIT_VAL	0x1FF
+#define	TDR_TDAT_9BIT_MSK	(TDR_TDAT_9BIT_VAL << TDR_TDAT_9BIT_LSHIFT)
+
+/* CCR0 (Common Control Register 0) */
+#define CCR0_SSE		BIT(24)	/* SSn# Pin Function Enable */
+#define CCR0_TEIE		BIT(21)	/* Transmit End Interrupt Enable */
+#define CCR0_TIE		BIT(20)	/* Transmit Interrupt Enable */
+#define CCR0_RIE		BIT(16)	/* Receive Interrupt Enable */
+#define CCR0_IDSEL		BIT(10)	/* ID Frame Select */
+#define CCR0_DCME		BIT(9)	/* Data Compare Match Enable */
+#define CCR0_MPIE		BIT(8)	/* Multiprocessor Interrupt Enable */
+#define CCR0_TE			BIT(4)	/* Transmit Enable */
+#define CCR0_RE			BIT(0)	/* Receive Enable */
+
+/* CCR1 (Common Control Register 1) */
+#define CCR1_NFEN		BIT(28)	/* Digital Noise Filter Function */
+#define CCR1_SHARPS		BIT(20)	/* Half -duplex Communication Select */
+#define CCR1_SPLP		BIT(16)	/* Loopback Control */
+#define CCR1_RINV		BIT(13)	/* RxD invert */
+#define CCR1_TINV		BIT(12)	/* TxD invert */
+#define CCR1_PM			BIT(9)	/* Parity Mode */
+#define CCR1_PE			BIT(8)	/* Parity Enable */
+#define CCR1_SPB2IO		BIT(5)	/* Serial Port Break I/O */
+#define CCR1_SPB2DT		BIT(4)	/* Serial Port Break Data Select */
+#define CCR1_CTSPEN		BIT(1)	/* CTS External Pin Enable */
+#define CCR1_CTSE		BIT(0)	/* CTS Enable */
+
+/* CCR2 (Common Control Register 2) */
+#define	CCR2_INIT		0xFF000004
+#define CCR2_CKS_TCLK		(0)	/* TCLK clock */
+#define CCR2_CKS_TCLK_DIV4	BIT(20)	/* TCLK/4 clock */
+#define CCR2_CKS_TCLK_DIV16	BIT(21)	/* TCLK16 clock */
+#define CCR2_CKS_TCLK_DIV64	(BIT(21) | BIT(20))	/* TCLK/64 clock */
+#define CCR2_BRME		BIT(16)	/* Bitrate Modulation Enable */
+#define CCR2_ABCSE		BIT(6)	/* Asynchronous Mode Extended Base Clock Select */
+#define CCR2_ABCS		BIT(5)	/* Asynchronous Mode Base Clock Select */
+#define CCR2_BGDM		BIT(4)	/* Baud Rate Generator Double-Speed Mode Select */
+
+/* CCR3 (Common Control Register 3) */
+#define	CCR3_INIT		0x1283
+#define CCR3_BLK		BIT(29)	/* Block Transfer Mode */
+#define CCR3_GM			BIT(28)	/* GSM Mode */
+#define CCR3_CKE1		BIT(25)	/* Clock Enable 1 */
+#define CCR3_CKE0		BIT(24)	/* Clock Enable 0 */
+#define CCR3_DEN		BIT(21)	/* Driver Enabled */
+#define CCR3_FM			BIT(20)	/* FIFO Mode Select */
+#define CCR3_MP			BIT(19)	/* Multi-Processor Mode */
+#define CCR3_MOD_ASYNC		0	/* Asynchronous mode (Multi-processor mode) */
+#define CCR3_RXDESEL		BIT(15)	/* Asynchronous Start Bit Edge Detection Select */
+#define CCR3_STP		BIT(14)	/* Stop bit Length */
+#define CCR3_SINV		BIT(13)	/* Transmitted/Received Data Invert */
+#define CCR3_LSBF		BIT(12)	/* LSB First select */
+#define CCR3_CHR1		BIT(9)	/* Character Length */
+#define CCR3_CHR0		BIT(8)	/* Character Length */
+#define CCR3_BPEN		BIT(7)	/* Synchronizer Bypass Enable */
+#define CCR3_CPOL		BIT(1)	/* Clock Polarity Select */
+#define CCR3_CPHA		BIT(0)	/* Clock Phase Select */
+
+/* FCR (FIFO Control Register) */
+#define FCR_RFRST		BIT(23)	/* Receive FIFO Data Register Reset */
+#define FCR_TFRST		BIT(15)	/* Transmit FIFO Data Register Reset */
+#define FCR_DRES		BIT(0)	/* Incoming Data Ready Error Select */
+#define FCR_RTRG4_0		GENMASK(20, 16)
+#define FCR_TTRG		GENMASK(12, 8)
+
+/* CSR (Common Status Register) */
+#define CSR_RDRF		BIT(31)	/* Receive Data Full */
+#define CSR_TEND		BIT(30)	/* Transmit End Flag */
+#define CSR_TDRE		BIT(29)	/* Transmit Data Empty */
+#define CSR_FER			BIT(28)	/* Framing Error */
+#define CSR_PER			BIT(27)	/* Parity Error */
+#define CSR_MFF			BIT(26)	/* Mode Fault Error */
+#define CSR_ORER		BIT(24)	/* Overrun Error */
+#define CSR_DFER		BIT(18)	/* Data Compare Match Framing Error */
+#define CSR_DPER		BIT(17)	/* Data Compare Match Parity Error */
+#define CSR_DCMF		BIT(16)	/* Data Compare Match */
+#define CSR_RXDMON		BIT(15)	/* Serial Input Data Monitor */
+#define CSR_ERS			BIT(4)	/* Error Signal Status */
+
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->params->error_mask)
+#define SCxSR_ERROR_CLEAR(port)	(to_sci_port(port)->params->error_clear)
+
+#define RSCI_DEFAULT_ERROR_MASK	(CSR_PER | CSR_FER)
+
+#define RSCI_RDxF_CLEAR		(CFCLR_RDRFC)
+#define RSCI_ERROR_CLEAR	(CFCLR_PERC | CFCLR_FERC)
+#define RSCI_TDxE_CLEAR		(CFCLR_TDREC)
+#define RSCI_BREAK_CLEAR	(CFCLR_PERC | CFCLR_FERC | CFCLR_ORERC)
+
+/* FRSR (FIFO Receive Status Register) */
+#define FRSR_R5_0		GENMASK(13, 8)	/* Receive FIFO Data Count */
+#define FRSR_DR			BIT(0)	/* Receive Data Ready */
+
+/* CFCLR (Common Flag CLear Register) */
+#define CFCLR_RDRFC		BIT(31)	/* RDRF Clear */
+#define CFCLR_TDREC		BIT(29)	/* TDRE Clear */
+#define CFCLR_FERC		BIT(28)	/* FER Clear */
+#define CFCLR_PERC		BIT(27)	/* PER Clear */
+#define CFCLR_MFFC		BIT(26)	/* MFF Clear */
+#define CFCLR_ORERC		BIT(24)	/* ORER Clear */
+#define CFCLR_DFERC		BIT(18)	/* DFER Clear */
+#define CFCLR_DPERC		BIT(17)	/* DPER Clear */
+#define CFCLR_DCMFC		BIT(16)	/* DCMF Clear */
+#define CFCLR_ERSC		BIT(4)	/* ERS Clear */
+#define CFCLR_CLRFLAG		(CFCLR_RDRFC | CFCLR_FERC | CFCLR_PERC | \
+				 CFCLR_MFFC | CFCLR_ORERC | CFCLR_DFERC | \
+				 CFCLR_DPERC | CFCLR_DCMFC | CFCLR_ERSC)
+
+/* FFCLR (FIFO Flag CLear Register) */
+#define FFCLR_DRC		BIT(0)	/* DR Clear */
+
+#define DCR_DEPOL		BIT(0)
+
+static u32 rzsci_serial_in(struct uart_port *p, int offset)
+{
+	return ioread32(p->membase + offset);
+}
+
+static void rzsci_serial_out(struct uart_port *p, int offset, int value)
+{
+	iowrite32(value, p->membase + offset);
+}
+
+static void rzsci_clear_DRxC(struct uart_port *port)
+{
+	rzsci_serial_out(port, CFCLR, CFCLR_RDRFC);
+	rzsci_serial_out(port, FFCLR, FFCLR_DRC);
+}
+
+static void rzsci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+	rzsci_serial_out(port, CFCLR, mask);
+}
+
+static void rzsci_start_rx(struct uart_port *port)
+{
+	unsigned int ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl |= CCR0_RIE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_set_termios(struct uart_port *port, struct ktermios *termios,
+			      const struct ktermios *old)
+{
+	struct sci_port *s = to_sci_port(port);
+	unsigned long flags;
+
+	/*
+	 * For now, only RX enabling is supported
+	 */
+
+	sci_port_enable(s);
+	uart_port_lock_irqsave(port, &flags);
+
+	if (termios->c_cflag & CREAD)
+		rzsci_start_rx(port);
+
+	uart_port_unlock_irqrestore(port, flags);
+	sci_port_disable(s);
+}
+
+static int rzsci_txfill(struct uart_port *port)
+{
+	return rzsci_serial_in(port, FTSR);
+}
+
+static int rzsci_rxfill(struct uart_port *port)
+{
+	u32 val = rzsci_serial_in(port, FRSR);
+	return FIELD_GET(FRSR_R5_0, val);
+}
+
+static unsigned int rzsci_tx_empty(struct uart_port *port)
+{
+	unsigned int status = rzsci_serial_in(port, CSR);
+	unsigned int in_tx_fifo = rzsci_txfill(port);
+
+	return (status & CSR_TEND) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+}
+
+static void rzsci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* not supported yet */
+	return;
+}
+
+static unsigned int rzsci_get_mctrl(struct uart_port *port)
+{
+	/* not supported yet */
+	return 0;
+}
+
+static void rzsci_clear_CFC(struct uart_port *port, unsigned int mask)
+{
+	rzsci_serial_out(port, CFCLR, mask);
+}
+
+static void rzsci_start_tx(struct uart_port *port)
+{
+	struct sci_port *sp = to_sci_port(port);
+	u32 ctrl;
+
+	if (sp->chan_tx)
+		return;
+
+	/*
+	 * TE (Transmit Enable) must be set after setting TIE
+	 * (Transmit Interrupt Enable) or in the same instruction
+	 * to start the transmit process.
+	 */
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl |= CCR0_TIE | CCR0_TE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_stop_tx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_TIE;
+
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_stop_rx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_RIE;
+
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static int rzsci_txroom(struct uart_port *port)
+{
+	return port->fifosize - rzsci_txfill(port);
+}
+
+static void rzsci_transmit_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	unsigned int stopped = uart_tx_stopped(port);
+	u32 status, ctrl;
+	int count;
+
+	status = rzsci_serial_in(port, CSR);
+	if (!(status & CSR_TDRE)) {
+		ctrl = rzsci_serial_in(port, CCR0);
+		if (kfifo_is_empty(&tport->xmit_fifo))
+			ctrl &= ~CCR0_TIE;
+		else
+			ctrl |= CCR0_TIE;
+		rzsci_serial_out(port, CCR0, ctrl);
+		return;
+	}
+
+	count = rzsci_txroom(port);
+
+	do {
+		unsigned char c;
+
+		if (port->x_char) {
+			c = port->x_char;
+			port->x_char = 0;
+		} else if (stopped || !kfifo_get(&tport->xmit_fifo, &c))
+			break;
+
+		rzsci_clear_CFC(port, CFCLR_TDREC);
+		rzsci_serial_out(port, TDR, c);
+
+		port->icount.tx++;
+	} while (--count > 0);
+
+	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (kfifo_is_empty(&tport->xmit_fifo)) {
+		ctrl = rzsci_serial_in(port, CCR0);
+		ctrl &= ~CCR0_TIE;
+		ctrl |= CCR0_TEIE;
+		rzsci_serial_out(port, CCR0, ctrl);
+	}
+}
+
+static void rzsci_receive_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	int i, count, copied = 0;
+	u32 status, frsr_status = 0;
+	unsigned char flag;
+
+	status = rzsci_serial_in(port, CSR);
+	frsr_status = rzsci_serial_in(port, FRSR);
+
+	if (!(status & CSR_RDRF) && !(frsr_status & FRSR_DR))
+		return;
+
+	while (1) {
+		/* Don't copy more bytes than there is room for in the buffer */
+		count = tty_buffer_request_room(tport, rzsci_rxfill(port));
+
+		/* If for any reason we can't copy more data, we're done! */
+		if (count == 0)
+			break;
+
+		for (i = 0; i < count; i++) {
+			char c;
+
+			status = rzsci_serial_in(port, CSR);
+			c = rzsci_serial_in(port, RDR) & RDR_RDAT_MSK;
+
+			if (uart_handle_sysrq_char(port, c)) {
+				count--;
+				i--;
+				continue;
+			}
+
+			/* Store data and status */
+			if (status & CSR_FER) {
+				flag = TTY_FRAME;
+				port->icount.frame++;
+			} else if (status & CSR_PER) {
+				flag = TTY_PARITY;
+				port->icount.parity++;
+			} else
+				flag = TTY_NORMAL;
+
+			tty_insert_flip_char(tport, c, flag);
+		}
+
+		rzsci_serial_in(port, CSR); /* dummy read */
+		rzsci_clear_DRxC(port);
+
+		copied += count;
+		port->icount.rx += count;
+	}
+
+	if (copied) {
+		/* Tell the rest of the system the news. New characters! */
+		tty_flip_buffer_push(tport);
+	} else {
+		/* TTY buffers full; read from RX reg to prevent lockup */
+		rzsci_serial_in(port, RDR);
+		rzsci_serial_in(port, CSR); /* dummy read */
+		rzsci_clear_DRxC(port);
+	}
+}
+
+static void rzsci_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 status;
+
+	do {
+		status = rzsci_serial_in(port, CSR);
+	} while (!(status & CSR_TDRE));
+
+	rzsci_serial_out(port, TDR, c);
+	rzsci_clear_SCxSR(port, CFCLR_TDREC);
+	return;
+}
+
+static unsigned int rzci_get_ctrl_temp(struct uart_port *port, unsigned int)
+{
+	struct sci_port *s = to_sci_port(port);
+
+	return s->params->param_bits.rxtx_enable | CCR0_TIE;
+}
+
+static const char *rzsci_type(struct uart_port *port)
+{
+	return "rzsci";
+}
+
+static const struct sci_common_regs rzsci_common_regs = {
+	.status = CSR,
+	.control = CCR0,
+};
+
+static const struct sci_port_params_bits rzsci_port_param_bits = {
+	.rxtx_enable = CCR0_RE | CCR0_TE,
+	.te_clear = CCR0_TE | CCR0_TEIE,
+	.poll_sent_bits = CSR_TDRE | CSR_TEND,
+};
+
+static const struct sci_port_params rzsci_port_params = {
+	.fifosize = 16,
+	.overrun_reg = CSR,
+	.overrun_mask = CSR_ORER,
+	.sampling_rate_mask = SCI_SR(32),
+	.error_mask = RSCI_DEFAULT_ERROR_MASK,
+	.error_clear = RSCI_ERROR_CLEAR,
+	.param_bits = rzsci_port_param_bits,
+	.common_regs = &rzsci_common_regs,
+};
+
+static const struct uart_ops rzt2_sci_uart_ops = {
+	.tx_empty	= rzsci_tx_empty,
+	.set_mctrl	= rzsci_set_mctrl,
+	.get_mctrl	= rzsci_get_mctrl,
+	.start_tx	= rzsci_start_tx,
+	.stop_tx	= rzsci_stop_tx,
+	.stop_rx	= rzsci_stop_rx,
+	.startup	= sci_startup,
+	.flush_buffer	= sci_flush_buffer,
+	.set_termios	= rzsci_set_termios,
+	.pm		= sci_pm,
+	.type		= rzsci_type,
+	.release_port	= sci_release_port,
+	.request_port	= sci_request_port,
+	.config_port	= sci_config_port,
+	.verify_port	= sci_verify_port,
+};
+
+static const struct sci_port_ops rzsci_port_ops = {
+	.read_reg		= rzsci_serial_in,
+	.write_reg		= rzsci_serial_out,
+	.clear_SCxSR		= rzsci_clear_SCxSR,
+	.transmit_chars		= rzsci_transmit_chars,
+	.receive_chars		= rzsci_receive_chars,
+	.poll_put_char		= rzsci_poll_put_char,
+	.get_ctrl_temp		= rzci_get_ctrl_temp,
+};
+
+struct sci_of_data sci_r9a09g077_data = {
+	.type = PORT_RZSCI,
+	.regtype = SCIx_RZT2H_SCI_REGTYPE,
+	.ops = &rzsci_port_ops,
+	.uart_ops = &rzt2_sci_uart_ops,
+	.params = &rzsci_port_params,
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+
+static int __init rzt2hsci_early_console_setup(struct earlycon_device *device,
+						const char *opt)
+{
+	return early_console_setup(device, &sci_r9a09g077_data);
+}
+
+OF_EARLYCON_DECLARE(rzsci, "renesas,r9a09g077-sci", rzt2hsci_early_console_setup);
+
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
diff --git a/drivers/tty/serial/rzsci.h b/drivers/tty/serial/rzsci.h
new file mode 100644
index 000000000000..2840b65e7010
--- /dev/null
+++ b/drivers/tty/serial/rzsci.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __RZT2_SCI_H__
+#define __RZT2_SCI_H__
+
+#include "sh-sci_common.h"
+
+#ifdef CONFIG_SERIAL_RZ_SCI
+extern struct sci_of_data sci_r9a09g077_data;
+#endif
+
+#endif /* __RZT2_SCI_H__ */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c58c0793c521..3c0e503295e9 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -54,6 +54,7 @@
 #include <asm/platform_early.h>
 #endif
 
+#include "rzsci.h"
 #include "serial_mctrl_gpio.h"
 #include "sh-sci.h"
 #include "sh-sci_common.h"
@@ -1804,7 +1805,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 	unsigned long flags;
 	u32 ctrl;
 
-	if (port->type != PORT_SCI)
+	if (port->type != PORT_SCI && port->type != PORT_RZSCI)
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
@@ -2988,10 +2989,10 @@ static int sci_init_single(struct platform_device *dev,
 	}
 
 	/*
-	 * The fourth interrupt on SCI port is transmit end interrupt, so
+	 * The fourth interrupt on SCI and RZSCI port is transmit end interrupt, so
 	 * shuffle the interrupts.
 	 */
-	if (p->type == PORT_SCI)
+	if (p->type == PORT_SCI || p->type == PORT_RZSCI)
 		swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]);
 
 	/* The SCI generates several interrupts. They can be muxed together or
@@ -3038,6 +3039,9 @@ static int sci_init_single(struct platform_device *dev,
 		else
 			sci_port->rx_trigger = 8;
 		break;
+	case PORT_RZSCI:
+		sci_port->rx_trigger = 15;
+		break;
 	default:
 		sci_port->rx_trigger = 1;
 		break;
@@ -3269,7 +3273,7 @@ static void sci_remove(struct platform_device *dev)
 
 	if (port->port.fifosize > 1)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
-	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
+	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF || type == PORT_RZSCI)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 }
 
@@ -3300,6 +3304,12 @@ static const struct of_device_id of_sci_match[] __maybe_unused = {
 		.compatible = "renesas,scif-r9a09g057",
 		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZV2H_SCIF_REGTYPE),
 	},
+#ifdef CONFIG_SERIAL_RZ_SCI
+	{
+		.compatible = "renesas,r9a09g077-sci",
+		.data = &sci_r9a09g077_data,
+	},
+#endif	/* CONFIG_SERIAL_RZ_SCI */
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",
@@ -3504,7 +3514,7 @@ static int sci_probe(struct platform_device *dev)
 			return ret;
 	}
 	if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB ||
-	    sp->port.type == PORT_HSCIF) {
+	    sp->port.type == PORT_HSCIF || sp->port.type == PORT_RZSCI) {
 		ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 		if (ret) {
 			if (sp->port.fifosize > 1) {
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0f2f50b8d28e..787fd9a96711 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -38,6 +38,7 @@ enum {
 	SCIx_HSCIF_REGTYPE,
 	SCIx_RZ_SCIFA_REGTYPE,
 	SCIx_RZV2H_SCIF_REGTYPE,
+	SCIx_RZT2H_SCI_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -50,7 +51,7 @@ struct plat_sci_port_ops {
  * Platform device specific platform_data struct
  */
 struct plat_sci_port {
-	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF / RZSCI */
 	upf_t		flags;			/* UPF_* flags */
 
 	unsigned int	sampling_rate;
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 9c007a106330..30fbbef599f4 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -231,6 +231,9 @@
 /* Sunplus UART */
 #define PORT_SUNPLUS	123
 
+/* SH-SCI */
+#define PORT_RZSCI	124
+
 /* Generic type identifier for ports which type is not important to userspace. */
 #define PORT_GENERIC	(-1)
 
-- 
2.43.0

Powered by blists - more mailing lists