[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <329fd3ef-5385-47e9-9e5b-875488cf9766@quicinc.com>
Date: Wed, 29 Jan 2025 23:58:55 +0530
From: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
To: Krzysztof Kozlowski <krzk@...nel.org>, <ath12k@...ts.infradead.org>
CC: <linux-wireless@...r.kernel.org>, Kalle Valo <kvalo@...nel.org>,
"Rob
Herring" <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
"Conor
Dooley" <conor+dt@...nel.org>,
Jeff Johnson <jjohnson@...nel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
Balamurugan S
<quic_bselvara@...cinc.com>,
P Praneesh <quic_ppranees@...cinc.com>
Subject: Re: [PATCH v4 08/13] wifi: ath12k: add AHB driver support for IPQ5332
On 12/10/2024 8:17 PM, Krzysztof Kozlowski wrote:
> On 10/12/2024 08:41, Raj Kumar Bhagat wrote:
>> From: Balamurugan S <quic_bselvara@...cinc.com>
>>
>> Add Initial Ath12k AHB driver support for IPQ5332. IPQ5332 is AHB
>> based IEEE802.11be 2 GHz 2x2 WiFi device.
>>
>> Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
>> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
>>
>> Signed-off-by: Balamurugan S <quic_bselvara@...cinc.com>
>> Co-developed-by: P Praneesh <quic_ppranees@...cinc.com>
>> Signed-off-by: P Praneesh <quic_ppranees@...cinc.com>
>> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
>> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
>> ---
>> drivers/net/wireless/ath/ath12k/ahb.c | 878 +++++++++++++++++++++++++
>> drivers/net/wireless/ath/ath12k/ahb.h | 37 ++
>> drivers/net/wireless/ath/ath12k/core.h | 4 +
>> drivers/net/wireless/ath/ath12k/hal.h | 1 +
>> drivers/net/wireless/ath/ath12k/hw.h | 1 +
>> 5 files changed, 921 insertions(+)
>> create mode 100644 drivers/net/wireless/ath/ath12k/ahb.c
>> create mode 100644 drivers/net/wireless/ath/ath12k/ahb.h
>>
>> diff --git a/drivers/net/wireless/ath/ath12k/ahb.c b/drivers/net/wireless/ath/ath12k/ahb.c
>> new file mode 100644
>> index 000000000000..fcd949faea9f
>> --- /dev/null
>> +++ b/drivers/net/wireless/ath/ath12k/ahb.c
>> @@ -0,0 +1,878 @@
>> +// SPDX-License-Identifier: BSD-3-Clause-Clear
>> +/*
>> + * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/dma-mapping.h>
>> +#include <linux/iommu.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>
> You don't use this header.
>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc.h>
>
> More headers here look unused.
>
sure, will remove unused headers in next version.
>> +#include <linux/soc/qcom/smem.h>
>> +#include <linux/soc/qcom/smem_state.h>
>> +#include "ahb.h"
>> +#include "debug.h"
>> +#include "hif.h"
>> +
>> +static const struct of_device_id ath12k_ahb_of_match[] = {
>> + { .compatible = "qcom,ipq5332-wifi",
>> + .data = (void *)ATH12K_HW_IPQ5332_HW10,
>> + },
>> + { }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, ath12k_ahb_of_match);
>
> This goes to driver struct declaration. It is really unusual to see it
> in some other places.
>
>
>> +
>> +#define ATH12K_IRQ_CE0_OFFSET 4
>> +
>
>
> ...
>
>> +
>> +static int ath12k_ahb_probe(struct platform_device *pdev)
>> +{
>> + struct ath12k_base *ab;
>> + const struct ath12k_hif_ops *hif_ops;
>> + struct device_node *mem_node;
>> + enum ath12k_hw_rev hw_rev;
>> + u32 addr;
>> + int ret;
>> +
>> + hw_rev = ath12k_ahb_get_hw_rev(pdev);
>> + switch (hw_rev) {
>> + case ATH12K_HW_IPQ5332_HW10:
>> + hif_ops = &ath12k_ahb_hif_ops_ipq5332;
>> + break;
>> + default:
>> + dev_err(&pdev->dev, "Unsupported device type %d\n", hw_rev);
>
> You already print once in ath12k_ahb_get_hw_rev() and none of these can
> happen. No need to print impossible conditions at all. No need to print
> impossible things twice.
>
sure, will drop this print.
>> + return -EOPNOTSUPP;
>> + }
>> +
>
>> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to set 32-bit coherent dma\n");
>> + return ret;
>> + }
>> +
>> + ab = ath12k_core_alloc(&pdev->dev, sizeof(struct ath12k_ahb),
>> + ATH12K_BUS_AHB);
>> + if (!ab) {
>> + dev_err(&pdev->dev, "failed to allocate ath12k base\n");
>> + return -ENOMEM;
>> + }
>> +
>> + ab->hif.ops = hif_ops;
>> + ab->pdev = pdev;
>> + ab->hw_rev = hw_rev;
>> + platform_set_drvdata(pdev, ab);
>> +
>> + /* Set fixed_mem_region to true for platforms that support fixed memory
>> + * reservation from DT. If memory is reserved from DT for FW, ath12k driver
>> + * need not to allocate memory.
>> + */
>> + if (!of_property_read_u32(ab->dev->of_node, "memory-region", &addr)) {
>> + set_bit(ATH12K_FLAG_FIXED_MEM_REGION, &ab->dev_flags);
>> +
>> + /* If the platform supports fixed memory, then it should define/
>> + * reserve MLO global memory in DT to support Multi Link Operation
>> + * (IEEE 802.11be).
>> + * If MLO global memory is not reserved in fixed memory mode, then
>> + * MLO cannot be supported.
>> + */
>> + mem_node = of_find_node_by_name(NULL, "mlo_global_mem_0");
>
> NAK. Incorrect name, not conforming to coding style. Undocumented ABI.
>
> Drop all calls to of_find_node_by_name() or any other stuff like this.
>
Sure, will remove all calls to - of_find_node_by_name()
>> + if (!mem_node)
>> + ab->single_chip_mlo_supp = false;
>> + }
>> +
>> + ret = ath12k_core_pre_init(ab);
>> + if (ret)
>> + goto err_core_free;
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists