[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250131-bcm59054-v3-0-bbac52a84787@gmail.com>
Date: Fri, 31 Jan 2025 19:13:48 +0100
From: Artur Weber <aweber.kernel@...il.com>
To: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>
Cc: Stanislav Jakubek <stano.jakubek@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
~postmarketos/upstreaming@...ts.sr.ht,
Artur Weber <aweber.kernel@...il.com>
Subject: [PATCH v3 0/7] mfd: bcm590xx: Add support for BCM59054
Add support for the BCM59054 MFD to the bcm590xx driver and fix a
couple of small bugs in it that also affected the already supported
BCM59056.
While we're at it - convert the devicetree bindings to YAML format
and drop the bcm59056 DTS in favor of describing the PMU in users'
DTS files, as is done for most other MFDs.
The BCM59054 is fairly similar to the BCM59056, with the primary
difference being the different number and layout of regulators.
It is primarily used in devices using the BCM21664 and BCM23550
chipsets.
This patchset has been tested on a Samsung Galaxy Grand Neo
(baffinlite rev02; DTS not in mainline yet) with a BCM59054 PMIC.
Testing on a BCM59056 would be appreciated.
Signed-off-by: Artur Weber <aweber.kernel@...il.com>
---
Changes in v3:
- Split out regulator DT bindings into separate YAML
- Use tables of regulator info instead of get_XXX_register, reg_is_XXX
functions
- Drop "regulator: bcm590xx: Add proper handling for PMMODE registers";
it adds unnecessary noise to the series and will be submitted separately
- Link to v2: https://lore.kernel.org/r/20231030-bcm59054-v2-0-5fa4011aa5ba@gmail.com
Changes in v2:
- Fixed BCM59054 ID being passed to BCM59056 function in the
regulator driver
- Dropped linux-rpi-kernel from the CC list
- Link to v1: https://lore.kernel.org/r/20231030-bcm59054-v1-0-3517f980c1e3@gmail.com
---
Artur Weber (7):
dt-bindings: mfd: brcm,bcm59056: Convert to YAML
dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054
ARM: dts: Drop DTS for BCM59056 PMIC
mfd: bcm590xx: Add compatible for BCM59054
regulator: bcm590xx: Store regulator descriptions in table
regulator: bcm590xx: Rename BCM59056-specific data as such
regulator: bcm590xx: Add support for BCM59054 regulators
.../devicetree/bindings/mfd/brcm,bcm59056.txt | 39 -
.../devicetree/bindings/mfd/brcm,bcm59056.yaml | 76 ++
.../bindings/regulator/brcm,bcm59054.yaml | 55 ++
.../bindings/regulator/brcm,bcm59056.yaml | 58 ++
arch/arm/boot/dts/broadcom/bcm28155-ap.dts | 68 +-
arch/arm/boot/dts/broadcom/bcm59056.dtsi | 91 --
drivers/mfd/bcm590xx.c | 6 +-
drivers/regulator/bcm590xx-regulator.c | 1029 +++++++++++++++-----
include/linux/mfd/bcm590xx.h | 7 +
9 files changed, 1028 insertions(+), 401 deletions(-)
---
base-commit: 0c3836482481200ead7b416ca80c68a29cfdaabd
change-id: 20240816-bcm59054-a880695e41e8
Best regards,
--
Artur Weber <aweber.kernel@...il.com>
Powered by blists - more mailing lists