| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <269561652.481649.1738416346650.JavaMail.zimbra@couthit.local>
Date: Sat, 1 Feb 2025 18:55:46 +0530 (IST)
From: Basharath Hussain Khaja <basharath@...thit.com>
To: horms <horms@...nel.org>
Cc: basharath <basharath@...thit.com>, danishanwar <danishanwar@...com>,
rogerq <rogerq@...nel.org>, andrew+netdev <andrew+netdev@...n.ch>,
davem <davem@...emloft.net>, edumazet <edumazet@...gle.com>,
kuba <kuba@...nel.org>, pabeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>, krzk+dt <krzk+dt@...nel.org>,
conor+dt <conor+dt@...nel.org>, nm <nm@...com>,
ssantosh <ssantosh@...nel.org>, tony <tony@...mide.com>,
richardcochran <richardcochran@...il.com>,
parvathi <parvathi@...thit.com>, schnelle <schnelle@...ux.ibm.com>,
rdunlap <rdunlap@...radead.org>, diogo ivo <diogo.ivo@...mens.com>,
m-karicheri2 <m-karicheri2@...com>,
jacob e keller <jacob.e.keller@...el.com>,
m-malladi <m-malladi@...com>,
javier carrasco cruz <javier.carrasco.cruz@...il.com>,
afd <afd@...com>, s-anna <s-anna@...com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
netdev <netdev@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-omap <linux-omap@...r.kernel.org>,
pratheesh <pratheesh@...com>, prajith <prajith@...com>,
vigneshr <vigneshr@...com>, praneeth <praneeth@...com>,
srk <srk@...com>, rogerq <rogerq@...com>,
krishna <krishna@...thit.com>, pmohan <pmohan@...thit.com>,
mohan <mohan@...thit.com>
Subject: Re: [RFC v2 PATCH 02/10] net: ti: prueth: Adds ICSSM Ethernet
driver
> On Fri, Jan 24, 2025 at 05:53:45PM +0530, Basharath Hussain Khaja wrote:
>> From: Roger Quadros <rogerq@...com>
>>
>> Updates Kernel configuration to enable PRUETH driver and its dependencies
>> along with makefile changes to add the new PRUETH driver.
>>
>> Changes includes init and deinit of ICSSM PRU Ethernet driver including
>> net dev registration and firmware loading for DUAL-MAC mode running on
>> PRU-ICSS2 instance.
>>
>> Changes also includes link handling, PRU booting, default firmware loading
>> and PRU stopping using existing remoteproc driver APIs.
>>
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> Signed-off-by: Andrew F. Davis <afd@...com>
>> Signed-off-by: Parvathi Pudi <parvathi@...thit.com>
>> Signed-off-by: Basharath Hussain Khaja <basharath@...thit.com>
>
> ...
>
>> diff --git a/drivers/net/ethernet/ti/icssm/icssm_prueth.c
>> b/drivers/net/ethernet/ti/icssm/icssm_prueth.c
>
> ...
>
>> +static int icssm_emac_set_boot_pru(struct prueth_emac *emac,
>> + struct net_device *ndev)
>> +{
>> + const struct prueth_firmware *pru_firmwares;
>> + struct prueth *prueth = emac->prueth;
>> + const char *fw_name;
>> + int ret;
>> +
>> + pru_firmwares = &prueth->fw_data->fw_pru[emac->port_id - 1];
>> + fw_name = pru_firmwares->fw_name[prueth->eth_type];
>> + if (!fw_name) {
>> + netdev_err(ndev, "eth_type %d not supported\n",
>> + prueth->eth_type);
>> + return -ENODEV;
>> + }
>> +
>> + ret = rproc_set_firmware(emac->pru, fw_name);
>> + if (ret) {
>> + netdev_err(ndev, "failed to set PRU0 firmware %s: %d\n",
>> + fw_name, ret);
>> + return ret;
>> + }
>> +
>> + ret = rproc_boot(emac->pru);
>> + if (ret) {
>> + netdev_err(ndev, "failed to boot PRU0: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> + * icssm_emac_ndo_open - EMAC device open
>> + * @ndev: network adapter device
>> + *
>> + * Called when system wants to start the interface.
>> + *
>> + * Return: 0 for a successful open, or appropriate error code
>> + */
>> +static int icssm_emac_ndo_open(struct net_device *ndev)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + int ret;
>> +
>> + ret = icssm_emac_set_boot_pru(emac, ndev);
>> + if (ret)
>> + netdev_err(ndev, "failed to boot PRU: %d\n", ret);
>
> Hi Roger, Basharath, all,
>
> icssm_emac_set_boot_pru() already logs errors, including the one above.
> So this log seems unnecessary to me.
>
> Also, should an error be returned here? If so, it looks like
> icssm_emac_set_boot_pru() should release resources allocated by
> rproc_set_firmware() if rproc_boot() fails.
>
Agreed. We will remove the extra print and make sure allocated resources
are released appropriately in the next version.
>> +
>> + /* start PHY */
>> + phy_start(emac->phydev);
>> +
>> + return 0;
>> +}
>
> ...
>
>> +static int icssm_prueth_netdev_init(struct prueth *prueth,
>> + struct device_node *eth_node)
>> +{
>> + struct prueth_emac *emac;
>> + struct net_device *ndev;
>> + enum prueth_port port;
>> + enum prueth_mac mac;
>> + int ret;
>> +
>> + port = icssm_prueth_node_port(eth_node);
>> + if (port == PRUETH_PORT_INVALID)
>> + return -EINVAL;
>> +
>> + mac = icssm_prueth_node_mac(eth_node);
>> + if (mac == PRUETH_MAC_INVALID)
>> + return -EINVAL;
>> +
>> + ndev = devm_alloc_etherdev(prueth->dev, sizeof(*emac));
>> + if (!ndev)
>> + return -ENOMEM;
>> +
>> + SET_NETDEV_DEV(ndev, prueth->dev);
>> + emac = netdev_priv(ndev);
>> + prueth->emac[mac] = emac;
>> + emac->prueth = prueth;
>> + emac->ndev = ndev;
>> + emac->port_id = port;
>> +
>> + /* by default eth_type is EMAC */
>> + switch (port) {
>> + case PRUETH_PORT_MII0:
>> + emac->pru = prueth->pru0;
>> + break;
>> + case PRUETH_PORT_MII1:
>> + emac->pru = prueth->pru1;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + /* get mac address from DT and set private and netdev addr */
>> + ret = of_get_ethdev_address(eth_node, ndev);
>> + if (!is_valid_ether_addr(ndev->dev_addr)) {
>> + eth_hw_addr_random(ndev);
>> + dev_warn(prueth->dev, "port %d: using random MAC addr: %pM\n",
>> + port, ndev->dev_addr);
>> + }
>> + ether_addr_copy(emac->mac_addr, ndev->dev_addr);
>> +
>> + /* connect PHY */
>> + emac->phydev = of_phy_get_and_connect(ndev, eth_node,
>> + icssm_emac_adjust_link);
>> + if (!emac->phydev) {
>> + dev_dbg(prueth->dev, "PHY connection failed\n");
>> + ret = -EPROBE_DEFER;
>
> Perhaps I misunderstand things, but if this occurs then
> presumably icssm_prueth_netdev_init() will be called again.
> And for each time this occirs another ndev will be allocated
> by devm_alloc_etherdev(), each of which will only be freed
> once the device is eventually torn-down.
>
> I wonder if it would be better to free ndev here.
> Which I think would imply using a non-mdev allocation for symmetry.
>
> Similarly for resources allocated in the caller icssm_prueth_probe().
>
Agreed, we will address this error case and free the resources appropriately.
>> + goto free;
>> + }
>> +
>> + /* remove unsupported modes */
>> + phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
>> +
>> + phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
>> + phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
>> +
>> + phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_Pause_BIT);
>> + phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT);
>> +
>> + ndev->netdev_ops = &emac_netdev_ops;
>> +
>> + return 0;
>> +free:
>
> nit: This doesn't free anything.
>
Sure. We will address in the next version.
>> + prueth->emac[mac] = NULL;
>> +
>> + return ret;
>> +}
>
> ...
Thanks & Best Regards,
Basharath
Powered by blists - more mailing lists