linux-kernel - Re: [PATCH] usb: dwc3: Fix timeout issue during controller enter/exit from halt state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1ef209d9-816f-4446-b658-846825e8cfe7@oss.qualcomm.com>
Date: Sat, 1 Feb 2025 23:18:52 +0530
From: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Selvarasu Ganesan <selvarasu.g@...sung.com>
Cc: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "balbi@...com" <balbi@...com>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "jh0801.jung@...sung.com" <jh0801.jung@...sung.com>,
        "dh10.jung@...sung.com" <dh10.jung@...sung.com>,
        "naushad@...sung.com" <naushad@...sung.com>,
        "akash.m5@...sung.com" <akash.m5@...sung.com>,
        "h10.kim@...sung.com" <h10.kim@...sung.com>,
        "eomji.oh@...sung.com" <eomji.oh@...sung.com>,
        "alim.akhtar@...sung.com" <alim.akhtar@...sung.com>,
        "thiagu.r@...sung.com" <thiagu.r@...sung.com>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Subject: Re: [PATCH] usb: dwc3: Fix timeout issue during controller enter/exit
 from halt state



On 2/1/2025 5:45 AM, Thinh Nguyen wrote:
> On Fri, Jan 31, 2025, Selvarasu Ganesan wrote:
>> There is a frequent timeout during controller enter/exit from halt state
>> after toggling the run_stop bit by SW. This timeout occurs when
>> performing frequent role switches between host and device, causing
>> device enumeration issues due to the timeout. This issue was not present
>> when USB2 suspend PHY was disabled by passing the SNPS quirks
>> (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
>> However, there is a requirement to enable USB2 suspend PHY by setting of
>> GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
>> in gadget or host mode results in the timeout issue.
>>
>> This commit addresses this timeout issue by ensuring that the bits
>> GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
>> the dwc3_gadget_run_stop sequence and restoring them after the
>> dwc3_gadget_run_stop sequence is completed.
>>
>> Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
>> Cc: stable@...r.kernel.org
>> Signed-off-by: Selvarasu Ganesan <selvarasu.g@...sung.com>
>> ---
>>   drivers/usb/dwc3/gadget.c | 21 +++++++++++++++++++++
>>   1 file changed, 21 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index d27af65eb08a..4a158f703d64 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -2629,10 +2629,25 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
>>   {
>>   	u32			reg;
>>   	u32			timeout = 2000;
>> +	u32			saved_config = 0;
>>   
>>   	if (pm_runtime_suspended(dwc->dev))
>>   		return 0;
>>   
> 
> Can you add some comments here that this was added through experiment
> since it is not documented in the programming guide. It would be great
> to also note which platform you used to test this with.
> 

I did see this issue during pullup_exit() in SM6375 and SM8150 targets. 
The exact code logic worked out for me downstream.

Regards,
Krishna,