linux-kernel - Re: [PATCH v4 4/4] PCI: dwc: Add support for configuring lane equalization presets

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20250203161555.a32gpzv4j6cjajs5@thinkpad>
Date: Mon, 3 Feb 2025 21:45:55 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Jingoo Han <jingoohan1@...il.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
	konrad.dybcio@....qualcomm.com, quic_mrana@...cinc.com,
	quic_vbadigan@...cinc.com, Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>
Subject: Re: [PATCH v4 4/4] PCI: dwc: Add support for configuring lane
 equalization presets

On Fri, Jan 24, 2025 at 04:52:50PM +0530, Krishna Chaitanya Chundru wrote:
> PCIe equalization presets are predefined settings used to optimize
> signal integrity by compensating for signal loss and distortion in
> high-speed data transmission.
> 
> Based upon the number of lanes and the data rate supported, write
> the preset data read from the device tree in to the lane equalization
> control registers.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware-host.c | 41 +++++++++++++++++++++++
>  drivers/pci/controller/dwc/pcie-designware.h      |  3 ++
>  include/uapi/linux/pci_regs.h                     |  3 ++
>  3 files changed, 47 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 2cd0acbf9e18..eced862fb8dd 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -507,6 +507,10 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
>  	if (pci->num_lanes < 1)
>  		pci->num_lanes = dw_pcie_link_get_max_link_width(pci);
>  
> +	ret = of_pci_get_equalization_presets(dev, &pp->presets, pci->num_lanes);
> +	if (ret)
> +		goto err_free_msi;
> +
>  	/*
>  	 * Allocate the resource for MSG TLP before programming the iATU
>  	 * outbound window in dw_pcie_setup_rc(). Since the allocation depends
> @@ -802,6 +806,42 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void dw_pcie_program_presets(struct dw_pcie *pci, u8 cap_id, u8 lane_eq_offset,
> +				    u8 lane_reg_size, u8 *presets, u8 num_lanes)
> +{
> +	u32 cap;
> +	int i;
> +
> +	cap = dw_pcie_find_ext_capability(pci, cap_id);
> +	if (!cap)
> +		return;
> +
> +	/*
> +	 * Write preset values to the registers byte-by-byte for the given
> +	 * number of lanes and register size.
> +	 */
> +	for (i = 0; i < num_lanes * lane_reg_size; i++)
> +		dw_pcie_writeb_dbi(pci, cap + lane_eq_offset + i, presets[i]);

So this essentially means that the presets value derived from DT should be equal
to 'num_lanes', otherwise this function will write 0 for the undefined lanes.
But this should be taken care by binding as I mentioned in my review and code
should not worry about it.

> +}
> +
> +static void dw_pcie_config_presets(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	enum pci_bus_speed speed = pcie_link_speed[pci->max_link_speed];
> +
> +	/* For data rate of 8 GT/S each lane equalization control is 16bits wide */
> +	if (speed >= PCIE_SPEED_8_0GT && pp->presets.eq_presets_8gts[0] != 0xff)
> +		dw_pcie_program_presets(pci, PCI_EXT_CAP_ID_SECPCI, PCI_SECPCI_LE_CTRL,
> +					0x2, (u8 *)pp->presets.eq_presets_8gts, pci->num_lanes);

You should just pass PCIE_SPEED_8_0GT to the dw_pcie_program_presets() helper
and it should figure out the register bits, size and lane count inside. Like,

	dw_pcie_program_presets(pci, PCIE_SPEED_8_0GT);

> +
> +	/* For data rate of 16 GT/S each lane equalization control is 8bits wide */
> +	if (speed >= PCIE_SPEED_16_0GT &&
> +	    pp->presets.eq_presets_Ngts[EQ_PRESET_TYPE_16GTS][0] != 0xff)
> +		dw_pcie_program_presets(pci, PCI_EXT_CAP_ID_PL_16GT, PCI_PL_16GT_LE_CTRL,
> +					0x1, pp->presets.eq_presets_Ngts[EQ_PRESET_TYPE_16GTS],
> +					pci->num_lanes);

Same here.

- Mani

-- 
மணிவண்ணன் சதாசிவம்