| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250203031213.399914-11-koichiro.den@canonical.com> Date: Mon, 3 Feb 2025 12:12:13 +0900 From: Koichiro Den <koichiro.den@...onical.com> To: linux-gpio@...r.kernel.org Cc: brgl@...ev.pl, geert+renesas@...der.be, linus.walleij@...aro.org, maciej.borzecki@...onical.com, linux-kernel@...r.kernel.org Subject: [PATCH v2 10/10] Documentation: gpio: document configfs interface for gpio-aggregator Add documentation for the newly added configfs-based interface for GPIO aggregator. Signed-off-by: Koichiro Den <koichiro.den@...onical.com> --- .../admin-guide/gpio/gpio-aggregator.rst | 93 +++++++++++++++++++ 1 file changed, 93 insertions(+) diff --git a/Documentation/admin-guide/gpio/gpio-aggregator.rst b/Documentation/admin-guide/gpio/gpio-aggregator.rst index 5cd1e7221756..e753f3dc4ae6 100644 --- a/Documentation/admin-guide/gpio/gpio-aggregator.rst +++ b/Documentation/admin-guide/gpio/gpio-aggregator.rst @@ -69,6 +69,99 @@ write-only attribute files in sysfs. $ echo gpio-aggregator.0 > delete_device +Aggregating GPIOs using Configfs +-------------------------------- + +**Group:** ``/config/gpio-aggregator`` + + This is the root directory of the gpio-aggregator configfs tree. + +**Group:** ``/config/gpio-aggregator/<example-name>`` + + This directory represents a GPIO aggregator device. You can assign any + name to ``<example-name>`` (e.g., ``agg0``), except names starting with + ``_auto`` prefix, which are reserved for auto-generated configfs + entries corresponding to devices created via Sysfs. + +**Attribute:** ``/config/gpio-aggregator/<example-name>/live`` + + The ``live`` attribute allows to trigger the actual creation of the device + once it's fully configured. The accepted values are: ``1`` to enable the + virtual device and ``0`` to disable and tear it down. + +**Attribute:** ``/config/gpio-aggregator/<example-name>/dev_name`` + + The read-only ``dev_name`` attribute exposes the name of the device as it + will appear in the system on the platform bus (e.g. ``gpio-aggregator.0``). + This is useful for identifying a character device for the newly created + aggregator. If it's ``gpio-aggregator.0``, + ``/sys/devices/platform/gpio-aggregator.0/gpiochipX`` path tells you that the + GPIO device id is ``X``. + +You must create subdirectories for each virtual line you want to +instantiate, named exactly as ``line0``, ``line1``, ..., ``lineY``, when +you want to instantiate ``Y+1`` (Y >= 0) lines. Configure all lines before +activating the device by setting ``live`` to 1. + +**Group:** ``/config/gpio-aggregator/<example-name>/<lineY>/`` + + This directory represents a GPIO line to include in the aggregator. + +**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/key`` + +**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/offset`` + + If ``offset`` is >= 0: + * ``key`` specifies the name of the chip this GPIO belongs to + * ``offset`` specifies the line offset within that chip. + If ``offset`` is <0: + * ``key`` needs to specify the GPIO line name. + +**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/name`` + + The ``name`` attribute sets a custom name for lineY. If left unset, the + line will remain unnamed. + +Once the configuration is done, the ``'live'`` attribute must be set to 1 +in order to instantiate the aggregator device. It can be set back to 0 to +destroy the virtual device. The module will synchronously wait for the new +aggregator device to be successfully probed and if this doesn't happen, writing +to ``'live'`` will result in an error. This is a different behaviour from the +case when you create it using sysfs ``new_device`` interface. + +.. note:: + + For aggregators created via Sysfs, the configfs entries are + auto-generated and appear as ``/config/gpio-aggregator/_auto.<N>/``. You + cannot add or remove line directories with mkdir(2)/rmdir(2). To modify + lines, you must use the "delete_device" interface to tear down the + existing device and reconfigure it from scratch. However, you can still + toggle the aggregator with the ``live`` attribute and adjust the + ``key``, ``offset``, and ``name`` attributes for each line when ``live`` + is set to 0 by hand (i.e. it's not waiting for deferred probe). + +Sample configuration commands +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + # Create a directory for an aggregator device + $ mkdir /sys/kernel/config/gpio-aggregator/agg0 + + # Configure each line + $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line0 + $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line0/key + $ echo 6 > /sys/kernel/config/gpio-aggregator/agg0/line0/offset + $ echo test0 > /sys/kernel/config/gpio-aggregator/agg0/line0/name + $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line1 + $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line1/key + $ echo 7 > /sys/kernel/config/gpio-aggregator/agg0/line1/offset + $ echo test1 > /sys/kernel/config/gpio-aggregator/agg0/line1/name + + # Activate the aggregator device + $ echo 1 > /sys/kernel/config/gpio-aggregator/agg0/live + + Generic GPIO Driver ------------------- -- 2.45.2
Powered by blists - more mailing lists