| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250204195240.005603b7@bootlin.com>
Date: Tue, 4 Feb 2025 19:52:40 +0100
From: Herve Codina <herve.codina@...tlin.com>
To: Maxime Ripard <mripard@...nel.org>
Cc: Andrzej Hajda <andrzej.hajda@...el.com>, Neil Armstrong
<neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>, Laurent
Pinchart <Laurent.pinchart@...asonboard.com>, Jonas Karlman
<jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>, David Airlie
<airlied@...il.com>, Simona Vetter <simona@...ll.ch>, Maarten Lankhorst
<maarten.lankhorst@...ux.intel.com>, Thomas Zimmermann
<tzimmermann@...e.de>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Marek Vasut
<marex@...x.de>, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Louis Chauvet
<louis.chauvet@...tlin.com>, Luca Ceresoli <luca.ceresoli@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v3 3/3] drm: bridge: ti-sn65dsi83: Add error recovery
mechanism
On Tue, 4 Feb 2025 18:11:01 +0100
Maxime Ripard <mripard@...nel.org> wrote:
> On Tue, Feb 04, 2025 at 04:34:04PM +0100, Herve Codina wrote:
> > On Tue, 4 Feb 2025 16:17:10 +0100
> > Maxime Ripard <mripard@...nel.org> wrote:
> >
> > > Hi,
> > >
> > > On Fri, Jan 17, 2025 at 09:12:13AM +0100, Herve Codina wrote:
> > > > Hi Maxime,
> > > >
> > > > On Thu, 16 Jan 2025 09:38:45 +0100
> > > > Maxime Ripard <mripard@...nel.org> wrote:
> > > >
> > > > > On Tue, Jan 14, 2025 at 01:54:56PM +0100, Herve Codina wrote:
> > > > > > Hi Maxime,
> > > > > >
> > > > > > On Tue, 14 Jan 2025 08:40:51 +0100
> > > > > > Maxime Ripard <mripard@...nel.org> wrote:
> > > > > >
> > > > > > ...
> > > > > >
> > > > > > > >
> > > > > > > > +static int sn65dsi83_reset_pipe(struct sn65dsi83 *sn65dsi83)
> > > > > > > > +{
> > > > > > > > + struct drm_atomic_state *state = ERR_PTR(-EINVAL);
> > > > > > > > + struct drm_device *dev = sn65dsi83->bridge.dev;
> > > > > > > > + struct drm_connector_state *connector_state;
> > > > > > > > + struct drm_modeset_acquire_ctx ctx;
> > > > > > > > + struct drm_connector *connector;
> > > > > > > > + int err;
> > > > > > > > +
> > > > > > > > + /*
> > > > > > > > + * Reset active outputs of the related CRTC.
> > > > > > > > + *
> > > > > > > > + * This way, drm core will reconfigure each components in the CRTC
> > > > > > > > + * outputs path. In our case, this will force the previous component to
> > > > > > > > + * go back in LP11 mode and so allow the reconfiguration of SN64DSI83
> > > > > > > > + * bridge.
> > > > > > > > + *
> > > > > > > > + * Keep the lock during the whole operation to be atomic.
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > + DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err);
> > > > > > > > +
> > > > > > > > + state = drm_atomic_helper_duplicate_state(dev, &ctx);
> > > > > > > > + if (IS_ERR(state)) {
> > > > > > > > + err = PTR_ERR(state);
> > > > > > > > + goto unlock;
> > > > > > > > + }
> > > > > > >
> > > > > > > No, you must not allocate a new state for this, you need to reuse the
> > > > > > > existing state. You'll find it in bridge->base.state->state.
> > > > > >
> > > > > > Thanks for pointing that. I didn't know about bridge->base.state->state.
> > > > > >
> > > > > > I will use that if using the state is still relevant (see next comment).
> > > > > >
> > > > > > >
> > > > > > > > + state->acquire_ctx = &ctx;
> > > > > > > > +
> > > > > > > > + connector = drm_atomic_get_old_connector_for_encoder(state,
> > > > > > > > + sn65dsi83->bridge.encoder);
> > > > > > > > + if (!connector) {
> > > > > > > > + err = -EINVAL;
> > > > > > > > + goto unlock;
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + connector_state = drm_atomic_get_connector_state(state, connector);
> > > > > > > > + if (IS_ERR(connector_state)) {
> > > > > > > > + err = PTR_ERR(connector_state);
> > > > > > > > + goto unlock;
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + err = drm_atomic_helper_reset_pipe(connector_state->crtc, &ctx);
> > > > > > > > + if (err < 0)
> > > > > > > > + goto unlock;
> > > > > > >
> > > > > > > And you'll find the crtc in bridge->encoder->crtc.
> > > > > >
> > > > > > I am a bit confused. I looked at the drm_encoder structure [1] and the crtc
> > > > > > field available in this structure should not be used by atomic drivers. They
> > > > > > should rely on &drm_connector_state.crtc.
> > > > >
> > > > > You're right, it's deprecated but used by most bridges anyway.
> > > > >
> > > > > I made a series of changes after reviewing your series to address some
> > > > > issues with the current bridge API, most notably
> > > > >
> > > > > https://lore.kernel.org/dri-devel/20250115-bridge-connector-v1-25-9a2fecd886a6@kernel.org/
> > > >
> > > > Thanks for pointing that, indeed, it clarify many things!
> > > >
> > > > >
> > > > > > In my case, I have the feeling that I should get the ctrc from the current
> > > > > > state (i.e. bridge->base.state->state) using the sequence provided in this
> > > > > > current patch:
> > > > > > Retrieve the connector with drm_atomic_get_old_connector_for_encoder()
> > > > >
> > > > > Retrieving the old connector makes no sense though. It's the connector
> > > > > that was formerly associated with your encoder. It might work, it might
> > > > > not, it's not what you're looking for.
> > > > >
> > > > > > Retrieve the connector state with drm_atomic_get_connector_state()
> > > > >
> > > > > drm_atomic_get_connector_state will allocate and pull the connector
> > > > > state into the drm_atomic_state, even if it wasn't part of it before, so
> > > > > it's not great. And you don't need it in the first place, you only need
> > > > > the current active CRTC.
> > > >
> > > > Yes, I agree with that, I only need the active CRTC.
> > > >
> > > > I tried to get the current atomic_state from:
> > > > 1) bridge->base.state->state
> > > > 2) drm_bridge_state->base.state
> > > >
> > > > In both cases, it is NULL. Looking at Sima's reply in your series
> > > > explained that:
> > > > https://lore.kernel.org/dri-devel/Z4juJy7kKPbI2BDb@phenom.ffwll.local/
> > > >
> > > > If I understood correctly those pointers are explicitly cleared.
> > > >
> > > > So, with all of that, either:
> > > > a) I wait for your series to be applied in order to use your the crtc field from
> > > > drm_bridge_state added by:
> > > > https://lore.kernel.org/dri-devel/20250115-bridge-connector-v1-25-9a2fecd886a6@kernel.org/#t
> > > > b) I use the old school bridge->encoder->crtc for the moment
> > > >
> > > > Do you mind if I use the bridge->encoder->crtc way for the next iteration of
> > > > my series?
> > >
> > > Yeah, it makes sense.
> >
> > I already send a wrong v4 (sorry) and a correct v5 with modifications in
> > this way :)
> >
> > >
> > > Still, it would be great if you could test my series on your setup and see if it helps :)
> >
> > Of course, I can test updated version of your series.
> >
> > I already try to get the current atomic_state exactly the same way as you do
> > in your series and the pointer is NULL in my case.
>
> I sent a second version today, let me know if it works.
>
Tried your v2 series and...:
# modetest -s 39:1920x1080
trying to open device 'i915'...failed
...
trying to open device 'imx-lcdif'...done
[ 28.310476] ------------[ cut here ]------------
[ 28.310494] WARNING: CPU: 3 PID: 449 at drivers/gpu/drm/drm_bridge.c:943 drm_atomic_bridge_chain_check+0x24c/0x310 [drm]
setting mode 1920x1080-60.00Hz on[ 28.326058] Modules linked in: fsl_ldb imx8mp_interconnect imx_interconnect imx_cpufreq_dt imx8mm_thermal lm75 tmp103 rtc_snvs leds_pca963x snvs_pwrkey rtc_rs5c372 pwm_imx27 st_pressure_spi st_sensors_spi regmap_spi gpio_charger st_pressure_i2c st_pressure st_sensors_i2c industrialio_triggered_buffer kfifo_buf st_sensors led_bl panel_simple opt3001 iio_hwmon governor_userspace imx_bus imx8mp_hdmi_tx dw_hdmi dwmac_imx stmmac_platform stmmac pcs_xpcs phylink samsung_dsim imx_sdma imx_lcdif drm_dma_helper imx8mp_hdmi_pvi fsl_imx8_ddr_perf exc3000 caam ti_sn65dsi83 error hotplug_bridge pwm_bl drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks backlight gehc_sunh_connector ltc2497 ltc2497_core
[ 28.391264] CPU: 3 UID: 0 PID: 449 Comm: modetest Not tainted 6.14.0-rc1+ #18
[ 28.398404] Hardware name: GE HealthCare Supernova Patient Hub v1 (DT)
[ 28.404933] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.411896] pc : drm_atomic_bridge_chain_check+0x24c/0x310 [drm]
[ 28.417940] lr : drm_atomic_bridge_chain_check+0x134/0x310 [drm]
[ 28.423983] sp : ffff8000823eb860
[ 28.427299] x29: ffff8000823eb860 x28: ffff000000ac1e00 x27: ffff00007b27ea18
[ 28.434445] x26: ffff00007b27ea90 x25: ffff00007b106170 x24: ffff00007a5d6ed8
[ 28.441587] x23: ffff00007bb4b8a0 x22: ffff00007b27e800 x21: ffff00007b27ea00
[ 28.448732] x20: 0000000000000000 x19: ffff00007b106008 x18: 0000000000000000
[ 28.455876] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 28.463021] x14: 0000000000000000 x13: ffff00007a7c4ec0 x12: ffff000006dcb440
[ 28.470165] x11: ffff00007a7c4ec0 x10: ffff000079ee5200 x9 : ffff8000798e1aec
[ 28.477311] x8 : ffff00007a63f190 x7 : 0000000000000000 x6 : ffff800079954110
[ 28.484455] x5 : 0000000000000000 x4 : 0000000000000020 x3 : ffff000079a12d80
[ 28.491601] x2 : ffff00007b107000 x1 : ffff00007b106008 x0 : 0000000000000000
[ 28.498747] Call trace:
[ 28.501195] drm_atomic_bridge_chain_check+0x24c/0x310 [drm] (P)
[ 28.507241] drm_atomic_helper_check_modeset+0xa1c/0xca0 [drm_kms_helper]
[ 28.514046] drm_atomic_helper_check+0x28/0xb8 [drm_kms_helper]
[ 28.519980] drm_atomic_check_only+0x4bc/0x990 [drm]
[ 28.524982] drm_atomic_commit+0x50/0xd8 [drm]
[ 28.529463] drm_atomic_helper_set_config+0xe4/0x128 [drm_kms_helper]
[ 28.535919] drm_mode_setcrtc+0x1cc/0x7b0 [drm]
[ 28.540486] drm_ioctl_kernel+0xc0/0x140 [drm]
[ 28.544965] drm_ioctl+0x210/0x4e8 [drm]
[ 28.548926] __arm64_sys_ioctl+0xa4/0xe8
[ 28.552860] invoke_syscall+0x50/0x120
[ 28.556619] el0_svc_common.constprop.0+0x48/0xf8
[ 28.561330] do_el0_svc+0x28/0x40
[ 28.564653] el0_svc+0x30/0xd0
[ 28.567713] el0t_64_sync_handler+0x144/0x168
[ 28.572075] el0t_64_sync+0x198/0x1a0
[ 28.575746] ---[ end trace 0000000000000000 ]---
connectors 39, crtc 36
failed to set mode: Function not implemented
Without your series applied, modetest -s works correctly.
Due to the failure, I couldn't test your drm_bridge_get_current_state() to
see if I can retrieve the drm_bridge_state from my sn65dsi83_reset_pipe()
function.
Also, I have some local commits related to Luca's work about DRM bridge
hot-pluggin stuff on my test branch.
It will not be easy for me to test your series without them as my TI
sn65dsi83 bridge is behind a connector and I need some Luca's modification
to have a functional system. Sorry about that.
Hope that the kernel WARN log provided here will ring you a bell.
Feel free to ask for more information if needed.
Best regards,
Hervé
Powered by blists - more mailing lists