[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <709ed6c2097f494f1ed6e5b08f55ef87@manjaro.org>
Date: Tue, 04 Feb 2025 13:34:13 +0100
From: Dragan Simic <dsimic@...jaro.org>
To: Alexey Charkov <alchark@...il.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: rockchip: switch Rock 5C to PMIC-based TSHUT
reset
Hello Alexey,
On 2025-02-04 10:02, Alexey Charkov wrote:
> Radxa Rock 5C supports both CRU-based (default) and PMIC-based reset
> upon thermal runaway conditions. The former resets the SoC by
> internally
> poking the CRU from TSADC, while the latter power-cycles the whole
> board
> by pulling the PMIC reset line low in case of uncontrolled overheating.
>
> Switch to a PMIC-based reset, as the more 'thorough' of the two.
>
> Tested by temporarily setting rockchip,hw-tshut-temp to 65C to simulate
> overheating - this causes the board to reset when any of the on-chip
> temperature sensors surpasses the tshut temperature.
>
> Requires Alexander's patch [1] fixing TSADC pinctrl assignment
>
> [1]
> https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com
>
> Signed-off-by: Alexey Charkov <alchark@...il.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
> b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
> index
> 6e56d7704cbe0dc06242cb39df56b2fc9d6bc774..00b2d87a6bce4af883a3e7c7e606ea5b96c68b19
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
> @@ -873,6 +873,8 @@ regulator-state-mem {
> };
>
> &tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
> status = "okay";
> };
Looking good to me, thanks for the patch! I just went through
the Radxa ROCK 5C schematic and it all matches these DT additions.
Thus, please feel free to include:
Reviewed-by: Dragan Simic <dsimic@...jaro.org>
Powered by blists - more mailing lists