| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250204134806.28218-1-purvayeshi550@gmail.com> Date: Tue, 4 Feb 2025 19:18:06 +0530 From: Purva Yeshi <purvayeshi550@...il.com> To: jikos@...nel.org, bentiss@...nel.org, corbet@....net, jdelvare@...e.com, linux@...ck-us.net Cc: skhan@...uxfoundation.org, linux-usb@...r.kernel.org, linux-input@...r.kernel.org, linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org, Purva Yeshi <purvayeshi550@...il.com> Subject: [PATCH] docs: Fix spelling and grammatical issues Fix several spelling and grammatical errors across multiple documentation files. Signed-off-by: Purva Yeshi <purvayeshi550@...il.com> --- Documentation/hid/hiddev.rst | 4 ++-- Documentation/hid/intel-ish-hid.rst | 2 +- Documentation/hid/uhid.rst | 2 +- Documentation/hwmon/abituguru-datasheet.rst | 8 ++++---- Documentation/hwmon/abituguru.rst | 2 +- 5 files changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/hid/hiddev.rst b/Documentation/hid/hiddev.rst index 9b82c7f896aa..073485f84793 100644 --- a/Documentation/hid/hiddev.rst +++ b/Documentation/hid/hiddev.rst @@ -15,10 +15,10 @@ To support these disparate requirements, the Linux USB system provides HID events to two separate interfaces: * the input subsystem, which converts HID events into normal input device interfaces (such as keyboard, mouse and joystick) and a -normalised event interface - see Documentation/input/input.rst +normalized event interface - see Documentation/input/input.rst * the hiddev interface, which provides fairly raw HID events -The data flow for a HID event produced by a device is something like +The data flow for an HID event produced by a device is something like the following:: usb.c ---> hid-core.c ----> hid-input.c ----> [keyboard/mouse/joystick/event] diff --git a/Documentation/hid/intel-ish-hid.rst b/Documentation/hid/intel-ish-hid.rst index 2adc174fb576..fdabf6ec60db 100644 --- a/Documentation/hid/intel-ish-hid.rst +++ b/Documentation/hid/intel-ish-hid.rst @@ -21,7 +21,7 @@ mainly use HID over I2C or USB. But ISH doesn't use either I2C or USB. Overview ======== -Using a analogy with a usbhid implementation, the ISH follows a similar model +Using an analogy with a usbhid implementation, the ISH follows a similar model for a very high speed communication:: ----------------- ---------------------- diff --git a/Documentation/hid/uhid.rst b/Documentation/hid/uhid.rst index 2243a6b75914..2681038cd526 100644 --- a/Documentation/hid/uhid.rst +++ b/Documentation/hid/uhid.rst @@ -106,7 +106,7 @@ UHID_INPUT2: UHID_GET_REPORT_REPLY: If you receive a UHID_GET_REPORT request you must answer with this request. - You must copy the "id" field from the request into the answer. Set the "err" + You must copy the "id" field from the request into the answer. Set the "err" field to 0 if no error occurred or to EIO if an I/O error occurred. If "err" is 0 then you should fill the buffer of the answer with the results of the GET_REPORT request and set "size" correspondingly. diff --git a/Documentation/hwmon/abituguru-datasheet.rst b/Documentation/hwmon/abituguru-datasheet.rst index 0cd61471d2a2..8c55874061d4 100644 --- a/Documentation/hwmon/abituguru-datasheet.rst +++ b/Documentation/hwmon/abituguru-datasheet.rst @@ -6,9 +6,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or datasheet from Abit. The data I have got on uGuru have I assembled through my weak knowledge in "backwards engineering". And just for the record, you may have noticed uGuru isn't a chip developed by -Abit, as they claim it to be. It's really just an microprocessor (uC) created by +Abit, as they claim it to be. It's really just a microprocessor (uC) created by Winbond (W83L950D). And no, reading the manual for this specific uC or -mailing Windbond for help won't give any useful data about uGuru, as it is +mailing Winbond for help won't give any useful data about uGuru, as it is the program inside the uC that is responding to calls. Olle Sandberg <ollebull@...il.com>, 2005-05-25 @@ -35,7 +35,7 @@ As far as known the uGuru is always placed at and using the (ISA) I/O-ports ports are holding for detection. We will refer to 0xE0 as CMD (command-port) and 0xE4 as DATA because Abit refers to them with these names. -If DATA holds 0x00 or 0x08 and CMD holds 0x00 or 0xAC an uGuru could be +If DATA holds 0x00 or 0x08 and CMD holds 0x00 or 0xAC a uGuru could be present. We have to check for two different values at data-port, because after a reboot uGuru will hold 0x00 here, but if the driver is removed and later on attached again data-port will hold 0x08, more about this later. @@ -46,7 +46,7 @@ have to test CMD for two different values. On these uGuru's DATA will initially hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read first! -To be really sure an uGuru is present a test read of one or more register +To be really sure a uGuru is present a test read of one or more register sets should be done. diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst index cfda60b757ce..4a5ee16b1048 100644 --- a/Documentation/hwmon/abituguru.rst +++ b/Documentation/hwmon/abituguru.rst @@ -40,7 +40,7 @@ Supported chips: .. [2] There is a separate abituguru3 driver for these motherboards, the abituguru (without the 3 !) driver will not work on these - motherboards (and visa versa)! + motherboards (and vice versa)! Authors: - Hans de Goede <j.w.r.degoede@....nl>, -- 2.34.1
Powered by blists - more mailing lists